Klaus D. Müller-Glaser

发表

Basic concepts for an HDL reverse engineering tool-set

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996, ICCAD 1996.

Exploration of Uninitialized Configuration Memory Space for Intrinsic Identification of Xilinx Virtex-5 FPGA Devices

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2012, Int. J. Reconfigurable Comput..

Using target faults to achieve a minimized partial scan path

Klaus D. Müller-Glaser, Harald Gundlach, Bernd K. Koch, 1991, Digest of Papers 1991 VLSI Test Symposium 'Chip-to-System Test Concerns for the 90's.

Physical Layer Extraction of FlexRay Configuration Parameters

Klaus D. Müller-Glaser, Matthias Heinz, Verena Hoss, 2009, 2009 IEEE/IFIP International Symposium on Rapid System Prototyping.

Towards a Platform for Debugging Executed UML-Models in Embedded Systems

Klaus D. Müller-Glaser, Clemens Reichmann, Philipp Graf, 2004, UML Satellite Activities.

Towards a requirements definition, specification and system design environment

Klaus D. Müller-Glaser, Jürgen Bortolazzi, Yankin Tanurhan, 1992, Proceedings EURO-DAC '92: European Design Automation Conference.

Product line development for modular FPGA-based embedded systems

Klaus D. Müller-Glaser, Till Fischer, Christian Köllner, 2014, 2014 25nd IEEE International Symposium on Rapid System Prototyping.

Graphically notated fault modeling and safety analysis in the context of electric and electronic architecture development and functional safety

Klaus D. Müller-Glaser, Clemens Reichmann, Eduard Metzker, 2012, 2012 23rd IEEE International Symposium on Rapid System Prototyping (RSP).

A new concept for accurate modeling of VLSI interconnections and its application for timing simulation

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996, Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition.

Vernetzung von Steuergeräten an Antriebsstrang-Prüfständen

Albert Albers, Klaus D. Müller-Glaser, Christian Schyr, 2004 .

A self adaptive interfacing concept for consumer device integration into automotive entities

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2008, 2008 IEEE International Symposium on Parallel and Distributed Processing.

Intrinsic Identification of Xilinx Virtex-5 FPGA Devices Using Uninitialized Parts of Configuration Memory Space

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2010, 2010 International Conference on Reconfigurable Computing and FPGAs.

Rapid safety evaluation of hardware architectural designs compliant with ISO 26262

Klaus D. Müller-Glaser, Nico Adler, Stefan Otten, 2013, 2013 International Symposium on Rapid System Prototyping (RSP).

Zum automatischen Einfügen von Testpunkten in sequentielle Schaltungen

Klaus D. Müller-Glaser, Harald Gundlach, K. Müller-Glaser, 1990, Rechnergestützter Entwurf und Architektur mikroelektronischer Systeme.

An efficient specification-based regression test selection technique for EE-systems

Klaus D. Müller-Glaser, Ralf Reißing, Ralf Nörenberg, 2011, GI-Jahrestagung.

An approach to infrastructure-independent person localization with an IEEE 802.15.4 WSN

Wilhelm Stork, Klaus D. Müller-Glaser, Johannes Schmid, 2010, 2010 International Conference on Indoor Positioning and Indoor Navigation.

Electric/electronic architecture model driven FlexRay configuration

Klaus D. Müller-Glaser, Matthias Heinz, Martin Hillenbrand, 2011, MBEES.

A Real-Time Kernel - Rapid Prototyping with VHDL and FPLs

Klaus D. Müller-Glaser, Hans Rauch, Lennart Lindh, 1992, FPL.

Security for Mobile Low Power Nodes in a Personal Area Network by Means of Trusted Platform Modules

Wilhelm Stork, Klaus D. Müller-Glaser, Ulrich Großmann, 2007, ESAS.

Using ObjectCharts to specify and design electronic systems

Klaus D. Müller-Glaser, Yankin Tanurhan, Johannes Ernst, 1995, Proceedings Seventh Euromicro Workshop on Real-Time Systems.

Höchstintegrierte Digitalschaltungen für Datenverarbeitungsanlagen - Probleme und Lösungsansätze

Klaus D. Müller-Glaser, 1982, Elektron. Rechenanlagen.

Debugging Sequential Logic on FPGAs using Internal Configuration Access Port

Klaus D. Müller-Glaser, Jürgen Becker, Stephan Werner, 2010 .

Quality Assurance and Certification of Software Modules in Safety Critical Automotive Electronic Control Units Using a CASE-Tool Integration Platform

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kühl, 2004, ASWSD.

Dehnkraft-basierte Anforderungsanalyse für die textile Integration elektronischer Module in intelligente technische Textilien

Wilhelm Stork, Klaus D. Müller-Glaser, Adnene Gharbi, 2010 .

A Backplane for Mixed-Mode Cosimulation

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1995, EUROSIM.

Fast Feedback from Automated Tests Executed with the Product Build

Klaus D. Müller-Glaser, Clemens Reichmann, Martin Eyl, 2016, SWQD.

Integrated Design Process Support with VHDL-A

Klaus D. Müller-Glaser, Eric Sax, Yankin Tanurhan, 1995, EUROSIM.

Managing Functional Safety Processes for Automotive E/E Architectures in Integrated Model-Based Development Environments

Klaus D. Müller-Glaser, Nico Adler, Stefan Otten, 2014 .

Pedestrian Dead Reckoning as a Complementary Method for Wireless Sensor Network Ad-hoc Person Localization

Wilhelm Stork, Klaus D. Müller-Glaser, Johannes Schmid, 2012, SENSORNETS.

ISO/DIS 26262 in the Context of Electric and Electronic Architecture Modeling

Klaus D. Müller-Glaser, Clemens Reichmann, Matthias Heinz, 2010, ISARCS.

AN APPROACH TO CHIP-INTERNAL CURRENT MONITORING AND MEASUREMENT USING AN ELECTRON BEAM TESTER

Klaus D. Müller-Glaser, Klaus Helmreich, Peter Nagel, 1991, 1991, Proceedings. International Test Conference.

A Prototype of Trusted Platform Functionality on Reconfigurable Hardware for Bitstream Updates

Klaus D. Müller-Glaser, Benjamin Glas, Jürgen Becker, 2008, 2008 The 19th IEEE/IFIP International Symposium on Rapid System Prototyping.

Adaptive Runtime System with Intelligent Allocation of Dynamically Reconfigurable Function Model and Optimized Interface Topologies

Klaus D. Müller-Glaser, Lars Braun, Jürgen Becker, 2010, Dynamically Reconfigurable Systems.

An FPGA Based OFDM Communication System for the Contactless Decentralized Transportation

Klaus D. Müller-Glaser, Z. Hua, O. Simon, 2004 .

Development of electric/electronic architectures for safety‐related vehicle functions

Klaus D. Müller-Glaser, Matthias Heinz, Martin Hillenbrand, 2012, Softw. Pract. Exp..

Priority-based packet communication on a bus-shaped structure for FPGA-systems

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2009, 2009 Design, Automation & Test in Europe Conference & Exhibition.

A backplane approach for cosimulation in high-level system specification environments

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1995, Proceedings of EURO-DAC. European Design Automation Conference.

Model-Based Consistency Checks of Electric and Electronic Architectures against Requirements

Klaus D. Müller-Glaser, Philipp Graf, Nico Adler, 2011, MoDELS Workshops.

Designing the Software Architecture of an Embedded System with UML 2.0

Klaus D. Müller-Glaser, Gerd Frick, Barbara Scherrer, 2004 .

Scheduling for Concept-Oriented Rapid Prototyping

Klaus D. Müller-Glaser, Bernhard Spitzer, Alexander Burst, 2000, Des. Autom. Embed. Syst..

Development of an universal adaptable web based electronic patient record

Wilhelm Stork, Klaus D. Müller-Glaser, T. Bachmor, 2004 .

Basic concepts for an HDL reverse engineering tool-set

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996, Proceedings of International Conference on Computer Aided Design.

Transfer von Prozessen des Software-Produktlinien Engineering in die Elektrik/Elektronik-Architekturentwicklung von Fahrzeugen

Klaus D. Müller-Glaser, Bernd Hedenetz, Martin Jaensch, 2010, GI Jahrestagung.

A methodology for architecture-oriented rapid prototyping

Klaus D. Müller-Glaser, Markus Kühl, Bernhard Spitzer, 2001, Proceedings 12th International Workshop on Rapid System Prototyping. RSP 2001.

An Experimental Evaluation of Position Estimation Methods for Person Localization in Wireless Sensor Networks

Klaus D. Müller-Glaser, Uwe D. Hanebeck, Frederik Beutler, 2011, EWSN.

TEST/AGENT: CAD-INTEGRATED AUTOMATIC GENERATION OF TEST PROGRAMS

Klaus D. Müller-Glaser, R. Arnold, Werner Wolz, 1992, Proceedings International Test Conference 1992.

An approach for rapidly adapting the demands of ISO/DIS 26262 to electric/electronic architecture modeling

Klaus D. Müller-Glaser, Clemens Reichmann, Matthias Heinz, 2010, Proceedings of 2010 21st IEEE International Symposium on Rapid System Protyping.

A System Architecture for Reconfigurable Trusted Platforms

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2008, 2008 Design, Automation and Test in Europe.

Eine durchgehende Entwurfsumgebung für das Rapid Prototyping von eingebetteten elektronischen Systemen (A Continuous Design Environment for Rapid Prototyping of Embedded Electronic Systems)

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kühl, 2001, Informationstechnik Tech. Inform..

The impact of time-triggered communication in automotive embedded systems

Klaus D. Müller-Glaser, Julian Broy, 2007, 2007 International Symposium on Industrial Embedded Systems.

Hardware/software co-training by FPGA/ASIC synthesis and programming of a RISC microprocessor-core

Klaus D. Müller-Glaser, Jürgen Becker, Jens E. Becker, 2003, Proceedings 2003 IEEE International Conference on Microelectronic Systems Education. MSE'03.

Rapid specification of hardware-in-the-loop test systems in the automotive domain based on the electric / electronic architecture description of, vehicles

Klaus D. Müller-Glaser, Matthias Heinz, Martin Hillenbrand, 2010, Proceedings of 2010 21st IEEE International Symposium on Rapid System Protyping.

A Novel Partial Bitstream Merging Methodology Accelerating Xilinx Virtex-II FPGA Based RP System Setup

Klaus D. Müller-Glaser, Matthias Heinz, Carsten Bieser, 2006, 2006 International Conference on Field Programmable Logic and Applications.

Multiparadigm modeling in embedded systems design

Klaus D. Müller-Glaser, Eric Sax, Gerd Frick, 2004, IEEE Transactions on Control Systems Technology.

Prime Field ECDSA Signature Processing for Reconfigurable Embedded Systems

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2011, Int. J. Reconfigurable Comput..

Designing a Graphical Domain-Specific Modelling Language Targeting a Filter-Based Data Analysis Framework

Klaus D. Müller-Glaser, Christian Köllner, Andreas Rentschler, 2010, 2010 13th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing Workshops.

Car-to-Car Communication Security on Reconfigurable Hardware

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2009, VTC Spring 2009 - IEEE 69th Vehicular Technology Conference.

Guest Editorial

Fabrice Kordon, Klaus D. Müller-Glaser, Alexander Burst, 2000, Des. Autom. Embed. Syst..

Component-based models for runtime control and monitoring of embedded systems

Klaus D. Müller-Glaser, Johannes Schmid, Tobias Gädeke, 2012, ACES-MB '12.

Heterogene Software Modellierung für ein chemisches Analysegerät mit GeneralStore - eine Fallstudie

Klaus D. Müller-Glaser, Clemens Reichmann, P. Graf, 2005 .

Architektur für das echtzeitfähige Debugging ausführbarer Modelle auf rekonfigurierbarer Hardware

Klaus D. Müller-Glaser, Philipp Graf, Tobias Schwalb, 2009, MBMV.

Rapid Prototyping von eingebetteten elektronischen Systemen

Klaus D. Müller-Glaser, Markus Kühl, Alexander Burst, 2000, Informationstechnik Tech. Inform..

Efficient Resource Estimation During Mass Casualty Emergency Response Based on a Location Aware Disaster Aid Network

Wilhelm Stork, Klaus D. Müller-Glaser, Ashok-Kumar Chandra-Sekaran, 2008, EWSN.

Car2X-in-the-Loop - Development Platform for Vehicles, Control Units and Communication Systems

Klaus D. Müller-Glaser, T. Düser, Oliver Sander, 2010 .

System#: High-level synthesis of physical simulations for FPGA-based real-time execution

Klaus D. Müller-Glaser, Nico Adler, Christian Köllner, 2012, 22nd International Conference on Field Programmable Logic and Applications (FPL).

Seamless model-based design and deployment of wireless networked systems

Klaus D. Müller-Glaser, Johannes Schmid, Tobias Gädeke, 2012, 2012 23rd IEEE International Symposium on Rapid System Prototyping (RSP).

Automatic Generation of Realistic Simulation Scenarios out of Video Recordings

Klaus D. Müller-Glaser, Martin Hillenbrand, Jochen Kramer, 2014 .

Nonintrusive Black- and White-Box Testing of Embedded Systems Software against UML Models

Klaus D. Müller-Glaser, Clemens Reichmann, Philipp Graf, 2007, 18th IEEE/IFIP International Workshop on Rapid System Prototyping (RSP '07).

CAEin Requirements Definition and Specification for complex Microelectronic Systems

Klaus D. Müller-Glaser, Jürgen Bortolazzi, Yankin Tanurhan, 1993, The Sixth International Conference on VLSI Design.

Recording and Transmission of digital wound images with the help of mibile devices

Wilhelm Stork, Klaus D. Müller-Glaser, Martin Fischer, 2003, MoCoMed.

Evaluation System for Monitoring of Vital Parameters and Active Body Climate Control

Wilhelm Stork, Klaus D. Müller-Glaser, Adnene Gharbi, 2010, BIOSIGNALS.

Tele-monitoring as a medical application of Ubiquitous Computing

Wilhelm Stork, Klaus D. Müller-Glaser, Christophe Kunze, 2003, MoCoMed.

Ontology-Based Consideration of Electric/Electronic Architectures of Vehicles

Klaus D. Müller-Glaser, Matthias Heinz, Martin Hillenbrand, 2011, MBEES.

On automatic testpoint insertion in sequential circuits

Klaus D. Müller-Glaser, Harald Gundlach, K. Müller-Glaser, 1990, Proceedings. International Test Conference 1990.

Generative Development of Embedded Real-Time Systems

Klaus D. Müller-Glaser, Gerd Frick, 2002 .

Force-directed tracking in wireless networks using signal strength and step recognition

Klaus D. Müller-Glaser, Dorothea Wagner, Johannes Schmid, 2012, 2012 International Conference on Localization and GNSS.

The crosslinking of electronic control units on powertrain test beds

Albert Albers, Klaus D. Müller-Glaser, Christian Schyr, 2004 .

An automated approach to SystemC/Simulink co-simulation

Klaus D. Müller-Glaser, Jürgen Becker, Christian Köllner, 2011, 2011 22nd IEEE International Symposium on Rapid System Prototyping.

A Secure Keyflashing Framework for Access Systems in Highly Mobile Devices

Klaus D. Müller-Glaser, Benjamin Glas, Jürgen Becker, 2010 .

Traceability in a Fine Grained Software Configuration Management System

Klaus D. Müller-Glaser, Clemens Reichmann, Martin Eyl, 2017, SWQD.

VAMP: a VHDL based concept for accurate modeling and post layout timing simulation of electronic systems

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996, DAC '96.

MORPHEUS: Heterogeneous Reconfigurable Computing

Klaus D. Müller-Glaser, Jürgen Becker, Koen Bertels, 2007, 2007 International Conference on Field Programmable Logic and Applications.

Automatic central management for decentral mobilemedical devices using GSM and the Internet for Fleet management

Wilhelm Stork, Klaus D. Müller-Glaser, Tobias Bachmor, 2003, MoCoMed.

Configuration Measurement for FPGA-based Trusted Platforms

Klaus D. Müller-Glaser, Benjamin Glas, Jürgen Becker, 2009, 2009 IEEE/IFIP International Symposium on Rapid System Prototyping.

Automotive Control Unit Optimisation Perspectives: Body Functions on-Demand by Dynamic Reconfiguration

Klaus D. Müller-Glaser, Jürgen Becker, Michael Huebner, 2005 .

PATRES - A Mobile Patient simulator for Resuscitation Training

Wilhelm Stork, Klaus D. Müller-Glaser, Gero von Wagner, 2003, MoCoMed.

Extension of component-based models for control and monitoring of embedded systems at runtime

Klaus D. Müller-Glaser, Tobias Schwalb, 2011, 2011 22nd IEEE International Symposium on Rapid System Prototyping.

A Specification Driven Environment for Microsystem Design

Klaus D. Müller-Glaser, C. Kuntzsch, W. Wolz, 1990 .

Monitoring Executions on Reconfigurable Hardware at Model Level

Klaus D. Müller-Glaser, Philipp Graf, Tobias Schwalb, 2010, Models@run.time.

Concepts for the Usage of Real-Time Corba in Time-Triggered Architectures

Klaus D. Müller-Glaser, O. Barheine, 2001 .

An examination of feedback bridging faults in digital CMOS circuits

Klaus D. Müller-Glaser, Bernd K. Koch, 1993, 1993 IEEE International Symposium on Circuits and Systems.

Rechnergestützte Spezifikation in einer integrierten Entwrusumgebung für anwendungsspezifische Systeme

Klaus D. Müller-Glaser, Jürgen Bortolazzi, 1990, Rechnergestützter Entwurf und Architektur mikroelektronischer Systeme.

CAD of microsystems-a challenge for systems engineering

Klaus D. Müller-Glaser, 1996, Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition.

Rapid Prototyping von eingebetteten elektronischen Systemen (Rapid Prototyping of Embedded Electronic Systems).

Klaus D. Müller-Glaser, Markus Kühl, Alexander Burst, 2000 .

An approach for integrated specification and design of real-time systems

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1996, Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition.

Gaining Insight into Executable Models during Runtime: Architecture and Mappings

Klaus D. Müller-Glaser, Philipp Graf, 2007, IEEE Distributed Systems Online.

A VHDL reuse workbench

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996, Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition.

From object-oriented modeling to code generation for rapid prototyping of embedded electronic systems

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kühl, 2002, Proceedings 13th IEEE International Workshop on Rapid System Prototyping.

Universal object-oriented modeling for rapid prototyping of embedded electronic systems

Klaus D. Müller-Glaser, Markus Kühl, Bernhard Spitzer, 2001, Proceedings 12th International Workshop on Rapid System Prototyping. RSP 2001.

Prevent Collaboration Conflicts with Fine Grained Pessimistic Locking

Klaus D. Müller-Glaser, Clemens Reichmann, Martin Eyl, 2017, MODELSWARD.

Connected efficiency – A paradigm to evaluate energy efficiency in tactical vehicle-environments

Klaus D. Müller-Glaser, Eric Sax, Martin Hillenbrand, 2016 .

Performing Safety Evaluation on Detailed Hardware Level according to ISO 26262

Klaus D. Müller-Glaser, Nico Adler, Stefan Otten, 2013 .

Domain specific model driven design for automotive electronic control units

Klaus D. Müller-Glaser, 2006, Proceedings of the Design Automation & Test in Europe Conference.

Rapid Prototyping Design Acceleration Using a Novel Merging Methodology for Partial Configuration Streams of Xilinx Virtex-II FPGAs

Klaus D. Müller-Glaser, Carsten Bieser, K. Müller-Glaser, 2006, Seventeenth IEEE International Workshop on Rapid System Prototyping (RSP'06).

Design of a Vehicle-to-Vehicle communication system on reconfigurable hardware

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2009, 2009 International Conference on Field-Programmable Technology.

Scheduling strategies and estimations for concept-oriented rapid prototyping

Klaus D. Müller-Glaser, Markus Kühl, Alexander Burst, 1999, Proceedings Tenth IEEE International Workshop on Rapid System Prototyping. Shortening the Path from Specification to Prototype (Cat. No.PR00246).

On the fusion of inertial data for signal strength localization

Wilhelm Stork, Klaus D. Müller-Glaser, Johannes Schmid, 2011, 2011 8th Workshop on Positioning, Navigation and Communication.

Physical-Activity as Context-Information for Long-term Monitoring of Cardiovascular Diseases

Wilhelm Stork, Klaus D. Müller-Glaser, J. Ottenbacher, 2007 .

Porter for the ITIV LABS – Objective-Related Engineering Education in an Undergraduate Laboratory

Klaus D. Müller-Glaser, Stephan Werner, Andreas Lauber, 2015 .

ECDSA Signature Processing over Prime Fields for Reconfigurable Embedded Systems

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2010 .

Eine durchgängige und werkzeuggestützte Entwicklungsumgebung für eingebettete Hardware/Software Systeme

Klaus D. Müller-Glaser, Christian Köllner, Benjamin Lutz, 2008, MBMV.

Smartphone pedestrian navigation by foot-IMU sensor fusion

Wilhelm Stork, Klaus D. Müller-Glaser, Tobias Gädeke, 2012, 2012 Ubiquitous Positioning, Indoor Navigation, and Location Based Service (UPINLBS).

Rapid prototyping of a communication controller for the CAN bus

Klaus D. Müller-Glaser, Yankin Tanurhan, A. Winter, 1996, Proceedings Seventh IEEE International Workshop on Rapid System Prototyping. Shortening the Path from Specification to Prototype.

Modellbasierte Antriebsstrangentwicklung: Durchgängige Werkzeugkette vom Entwurf bis zur Validierung

Albert Albers, Klaus D. Müller-Glaser, Christian Schyr, 2007 .

Interface technologies for versatile rapid-prototyping systems

Klaus D. Müller-Glaser, Bernhard Spitzer, Alexander Burst, 1999, Proceedings Tenth IEEE International Workshop on Rapid System Prototyping. Shortening the Path from Specification to Prototype (Cat. No.PR00246).

ECG electrodes for a context-aware cardiac permanent monitoring system

Wilhelm Stork, Klaus D. Müller-Glaser, Ulrich Großmann, 2007 .

Real-time Car-to-X Communication Security and E/E Architecture Integration

Klaus D. Müller-Glaser, Oliver Sander, Benjamin Glas, 2012 .

A Security Scheme for Dependable Key Insertion in Mobile Embedded Devices

Klaus D. Müller-Glaser, Benjamin Glas, Jürgen Becker, 2011, Int. J. Reconfigurable Comput..

Poster Abstract: An Experimental Approach to Passive Person Localization in Wireless Networks

Wilhelm Stork, Klaus D. Müller-Glaser, Tobias Gadeke, 2013 .

A VHDL Reuse Workbe

Gunther Lehmann, Bernhard Wunder, Klaus D. Müller-Glaser, 1996 .

On Code Generation for Rapid Prototyping Using CDIF

Klaus D. Müller-Glaser, Bernhard Spitzer, Alexander Burst, 1998, OOPSLA 1998.

Acceleration of MPEG-4 video applications with the reconfigurable HW processor XPP

Klaus D. Müller-Glaser, Eberhard Schüler, Claus Ritter, 2003, Visual Communications and Image Processing.

Modellbasierte Erfassung von Optimierungsaktivitäten als Grundlage zur Systemoptimierung von Elektrik-/Elektronik-Architekturen

Klaus D. Müller-Glaser, Clemens Reichmann, Daniel Gebauer, 2011, MBMV.

Modeling for Synthesis with System#

Klaus D. Müller-Glaser, Christian Köllner, Francisco Mendoza, 2012, 2012 IEEE 26th International Parallel and Distributed Processing Symposium Workshops & PhD Forum.

An Overall System Design Approach Doing Object-Oriented Modeling to Code-Generation for Embedded Electronic Systems

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kühl, 2003, FASE.

A Range-Based Monte Carlo Patient Localization during Emergency Response to Crisis

Klaus D. Müller-Glaser, Ashok-Kumar Chandra-Sekaran, Gunnar Stefansson, 2009, 2009 Fifth Advanced International Conference on Telecommunications.

Hardware/software co-training lab: from VHDL bit-level coding up to CASE-Tool based system modeling

Klaus D. Müller-Glaser, Jürgen Becker, Carsten Bieser, 2005, 2005 IEEE International Conference on Microelectronic Systems Education (MSE'05).

An Approach to Supply Simulations of the Functional Environment of ECUs for Hardware-in-the-Loop Test Systems Based on EE-architectures Conform to AUTOSAR

Klaus D. Müller-Glaser, Martin Hillenbrand, 2009, 2009 IEEE/IFIP International Symposium on Rapid System Prototyping.

Rapid automotive bus system synthesis based on communication requirements

Klaus D. Müller-Glaser, Matthias Heinz, Martin Hillenbrand, 2011, 2011 22nd IEEE International Symposium on Rapid System Prototyping.

GeneralStore - a CASE-tool integration platform enabling model level coupling of heterogeneous designs for embedded electronic systems

Klaus D. Müller-Glaser, Clemens Reichmann, Philipp Graf, 2004, Proceedings. 11th IEEE International Conference and Workshop on the Engineering of Computer-Based Systems, 2004..

DRC-BASED SELECTION OF OPTIMAL PROBING POINTS FOR CMIP-INTERNAL MEASUREMENTS

Klaus D. Müller-Glaser, Klaus Helmreich, Werner Wolz, 1992, Proceedings International Test Conference 1992.

Using CDIF for concept-oriented rapid prototyping of electronic systems

Klaus D. Müller-Glaser, Markus Kühl, Alexander Burst, 1998, Proceedings. Ninth International Workshop on Rapid System Prototyping (Cat. No.98TB100237).

Advanced optimistic approaches in logic simulation

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1998, Proceedings Design, Automation and Test in Europe.

Knowledge sharing across organizational boundaries with application to distributed engineering processes

Klaus D. Müller-Glaser, Eric Sax, Gerd Frick, 2000, IRMA Conference.

A metric-based safety workflow for electric/electronic architectures of vehicles

Klaus D. Müller-Glaser, Matthias Heinz, Nico Adler, 2011, QoSA-ISARCS '11.

Dynamic Mapping of Runtime Information Models for Debugging Embedded Software

Klaus D. Müller-Glaser, Philipp Graf, 2006, Seventeenth IEEE International Workshop on Rapid System Prototyping (RSP'06).

Model-based powertrain development

Albert Albers, Klaus D. Müller-Glaser, Christian Schyr, 2007 .

SmartLoCore: A Concept for an Adaptive Power-Aware Localization Processor

Wilhelm Stork, Klaus D. Müller-Glaser, Jürgen Becker, 2014, 2014 22nd Euromicro International Conference on Parallel, Distributed, and Network-Based Processing.

Towards higher quality of design and test—perspectives of EBT tool integration

Klaus D. Müller-Glaser, W. Wolz, 1993 .

On the selection of a partial scan path with respect to target faults

Klaus D. Müller-Glaser, Harald Gundlach, Bernd K. Koch, 1991, Proceedings of the European Conference on Design Automation..

Design and realization of an active SAR calibrator for TerraSAR-X

Klaus D. Müller-Glaser, Werner Wiesbeck, Rainer Lenz, 2005, SPIE Remote Sensing.

Towards Real-Time System Specification and Design

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1996 .

Automatisierte Modellkopplung heterogener eingebetteter Systeme

Klaus D. Müller-Glaser, Philipp Graf, C. Reimann, 2004, PEARL.

Obtaining Energy Expenditure and Physical Activity from Acceleration Signals for Context-aware Evaluation of Cardiovascular Parameters

Wilhelm Stork, Klaus D. Müller-Glaser, Klaus Bös, 2007 .

Forschungszentrum Informatik an der Universität Karlsruhe (FZI)

Peter C. Lockemann, Klaus D. Müller-Glaser, 1999, Informatik Forschung und Entwicklung.

A Graphical Model-Level Debugger for Heterogenous Reconfigurable Architectures

Klaus D. Müller-Glaser, Jürgen Becker, Michael Hübner, 2007, 2007 International Conference on Field Programmable Logic and Applications.

Reliable EBT fine positioning using correlation-based window adjustment

Klaus D. Müller-Glaser, W. Wolz, D. Seitzer, 1993 .

Supporting System Level Design of Distributed Real Time Systems for Automotive Applications

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kühl, 2006, Monterey Workshop.

ModelScope: inspecting executable models during run-time

Klaus D. Müller-Glaser, Philipp Graf, 2008, ICSE Companion '08.

A rapid prototyping approach for specification and design of distributed automotive control systems

Klaus D. Müller-Glaser, Stefan Schmerler, Yankin Tanurhan, 1996, Proceedings of the Eighth Euromicro Workshop on Real-Time Systems.

Estimating essential design characteristics to support project planning for ASIC design management

Klaus D. Müller-Glaser, K. Neusinger, K. Kirsch, 1991, 1991 IEEE International Conference on Computer-Aided Design Digest of Technical Papers.

Context-aware personal health monitoring using body wearable sensors

Wilhelm Stork, Klaus D. Müller-Glaser, Christophe Kunze, 2005 .

Rapid Prototyping von Informationssystemen für Kraftfahrzeuge / Rapid Prototyping of Automotive Information Systems

Klaus D. Müller-Glaser, Stefan Schmerler, Alexander Burst, 1999, Informationstechnik Tech. Inform..

A virtual project house infrastructure for distributed development processes

Klaus D. Müller-Glaser, Gerd Frick, 2000, E-Business and Virtual Enterprises.

Failure mode and effect analysis based on electric and electronic architectures of vehicles to support the safety lifecycle ISO/DIS 26262

Klaus D. Müller-Glaser, Matthias Heinz, Nico Adler, 2010, Proceedings of 2010 21st IEEE International Symposium on Rapid System Protyping.

WBAN based Prototype for Active Body Climate Control based on Environmental and Individual Sensor Data

Wilhelm Stork, Klaus D. Müller-Glaser, Stephan Heuer, 2011, BIOSIGNALS.

A Model-Based Design Approach for a Dynamically Configurable Hardware-/Software-Architecture

Klaus D. Müller-Glaser, Clemens Reichmann, P. Graf, 2005 .

A bi-modal ad-hoc localization scheme for wireless networks based on RSS and ToF fusion

Wilhelm Stork, Klaus D. Müller-Glaser, Johannes Schmid, 2013, 2013 10th Workshop on Positioning, Navigation and Communication (WPNC).

Model-Based Design of E / E Architectures 2.0

Klaus D. Müller-Glaser, Martin Jaensch, Markus Conrath, 2011 .

An Approach to Intelligent Assistance for the Specification of ASIC Design Using Objects and Rules

Klaus D. Müller-Glaser, Jürgen Bortolazzi, 1989, 26th ACM/IEEE Design Automation Conference.

Entwurfsmethodiken zur Echtzeitsimulation physikalisch motivierter Modelle auf FPGAs: Eine Fallstudie

Klaus D. Müller-Glaser, Hai Yao, Christian Köllner, 2011, MBMV.

Framework Integration and Data Modeling in the METEOR Project

Klaus D. Müller-Glaser, Yankin Tanurhan, 1994 .

Supporting system level design of distributed electronic control units for automotive applications

Klaus D. Müller-Glaser, Clemens Reichmann, Markus Kuehl, 2006 .

Real World Evaluation of a New Environment Adaptive Localization System

Klaus D. Müller-Glaser, Ashok-Kumar Chandra-Sekaran, Christophe Kunze, 2010 .

Multiparadigm modeling in embedded systems design : Special issue on computer automated multiparadigm modeling

Klaus D. Müller-Glaser, Eric Sax, Gerd Frick, 2004 .