Jan Valíček

发表

INNOVATIVE APPROACH TO ADVANCED MODULATED WATERJET TECHNOLOGY

Milena Kušnerová, Josef Foldyna, Libor Sitek, 2012 .

A New Procedure for the Determination of the Main Technology Parameters of Rolling Mills

Jan Valíček, Marta Harničárová, Jana Müllerová, 2013 .

Vibration emission as a potential source of information for abrasive waterjet quality process control

Jan Valíček, Sergej Hloch, Hakan Tozan, 2012 .

Increasing tool life during turning with a variable depth of cut

Jan Valíček, Robert Čep, Marek Sadílek, 2013 .

Prediction of Optimal Load and Performance of Thermal Batteries

Jan Valíček, Marta Harničárová, Hakan Tozan, 2016 .

Using the acoustic sound pressure level for quality prediction of surfaces created by abrasive waterjet

Jan Valíček, Sergej Hloch, S. Hloch, 2010 .

Surface and topographical parameters investigation at abrasive waterjet machining by means of optical measurement

Katarina Monkova, Jan Valíček, Sergej Hloch, 2009 .

Evaluation of Texture Surface of Composite Material Based on WPC After Using Machining Technology

Jan Valíček, Marta Harničárová, Hakan Tozan, 2016 .

Surface geometric parameters proposal for the advanced control of abrasive waterjet technology

Jan Valíček, Sergej Hloch, Dražan Kozak, 2008 .

Experimental analysis of irregularities of metallic surfaces generated by abrasive waterjet

Petr Hlaváček, Jan Valíček, Sergej Hloch, 2007 .

VIRTUAL REALITY AS AN INNOVATIVE AND IMMERSIVE LEARNING TOOL FOR HEIS IN PALESTINE

Jan Valíček, Zuzana Palkova, Mahmoud Hawamdeh, 2019 .

Study on cone roller bearing surface roughness improvement and the effect of surface roughness on tapered roller bearing service life

Jan Valíček, Marta Harničárová, Anton Panda, 2016 .

Raziskave vodno jedkanih površin s svetlobnim zaznavanjem

Jan Valíček, Sergej Hloch, Milan Drzik, 2007 .

Influence of longitudinal cold rolling on the surface topography of low carbon structural steel for engine parts

Petr Hlaváček, Jan Valíček, Sergej Hloch, 2011 .

New procedure for determination of main technological parameters of rolling mill

Jan Valíček, Marta Harničárová, Jana Müllerová, 2011 .

Identification and Prediction of Surface Topography with Regard to Variable Conditions of Cold Rolling Process

Jan Valíček, Marta Harničárová, Zora Jančíková, 2014 .

Study of Surfaces Generated by Abrasive Waterjet Technology

Jan Valíček, Sergej Hloch, Miloslav Ohlídal, 2007 .

Neural Networks in the Diagnostics Process of Low-Power Solar Plant Devices

Jan Valíček, Jacek Paś, Dariusz Bernatowicz, 2021, Energies.

Approximation Possibilities of Fuzzy Control Surfaces for Purpose of Implementation into Microcontrollers

Jan Valíček, Marta Harničárová, Ondrej Lukáč, 2021, Processes.

NEW APPROACH IN EDUCATIONAL TECHNOLOGY

Jan Valíček, Marta Harničárová, Vojtěch Stehel, 2021 .

Technical Possibilities of Noise Reduction in Material Cutting by Abrasive Water-jet

Jan Valíček, Sergej Hloch, Jana Müllerová, 2009 .

Spectral analysis of metallic surfaces topography generated by abrasive waterjet

Petr Hlaváček, Jan Valíček, Sergej Hloch, 2012 .

Predicting residual and flow stresses from surface topography created by laser cutting technology

Jan Valíček, Marta Harničárová, Dražan Kozak, 2013 .

A new method for the prediction of laser cut surface topography

Jan Valíček, Marta Harničárová, Lenka Čepová, 2012 .

Measurement of Fine Grain Copper Surface Texture Created by Abrasive Water Jet Cutting

Petr Hlaváček, Josef Foldyna, Libor Sitek, 2009 .

Surface Quality Control of Materials Being Cut by Laser with Respect to Corrosion Resistance

Jan Valíček, Marta Harničárová, Krzysztof Rokosz, 2012 .

New way to take control of a structural grain size in the formation of nanomaterials by extrusion

Petr Hlaváček, Jan Valíček, Sergej Hloch, 2012 .

Surface Roughness after Machining and Influence of Feed Rate on Process

Jan Valíček, Marta Harničárová, Robert Čep, 2013 .

Prediction of distribution relationship of titanium surface topography created by abrasive waterjet

Jan Valíček, Sergej Hloch, S. Hloch, 2011 .

Emission Distribution and Regulation of Local Heat Source

Jan Valíček, Marta Harničárová, Jana Müllerová, 2012 .

Impact of abrasive mass flow rate when penetrating into a material on its vibration

Katarina Monkova, Jan Valíček, Sergej Hloch, 2010 .

Modifications concerning the combustion air from the pyrolysis boiler

Jan Valíček, Marta Harničárová, Jana Müllerová, 2012 .

Measurement of physical properties of polyurethane plaster

Jan Valíček, Marta Harničárová, Milena Kušnerová, 2014 .

Derivation and Measurement of the Velocity Parameters of Hydrodynamics Oscillating System

Jan Valíček, Sergej Hloch, Željko Ivandić, 2008 .

Optical measurement of surface and topographical parameters investigation created by Abrasive Waterjet

Jan Valíček, Sergej Hloch, S. Hloch, 2009 .

A new approach for the determination of technological parameters for hydroabrasive cutting of materials

Jan Valíček, Marta Harničárová, Anton Panda, 2016 .

Kinematic analysis of quick-return mechanism in three various approaches

Katarina Monkova, Jan Valíček, Sergej Hloch, 2011 .

A New Approach to Surface Tension According to the Surface Topographical Features in Laser Cutting Technology

Jan Valíček, Marta Harničárová, Jana Müllerová, 2013 .

Testing of Greenleaf ceramic cutting tools with an interrupted cutting

Jan Valíček, Robert Čep, Adam Janásek, 2011 .

Estimation of the smooth zone maximal depth at surfaces created by Abrasive Waterjet

Jan Valíček, Sergej Hloch, Vladimir Simkulet, 2009 .

Effects of pulsating water jet impact on aluminium surface

Josef Foldyna, Libor Sitek, Jan Valíček, 2009 .

Classification of technical materials according to classes machinability for hydroabrasive cutting

Jan Valíček, Sergej Hloch, Dražan Kozak, 2012 .

Topographical anomaly on surfaces created by abrasive waterjet

Jan Valíček, Sergej Hloch, S. Hloch, 2012 .

An investigation of surfaces generated by abrasive waterjets using optical detection

Jan Valíček, Sergej Hloch, Milan Držík, 2007 .

Experimental Study of Surface Roughness of Wood Plastic Composites after Turning

Jan Valíček, Marta Harničárová, Jozef Mihok, 2013 .

Monitoring of the condition of turning machine bearing housing through vibrations

Jan Valíček, Marta Harničárová, Anton Panda, 2018 .