Mohammad Reza Razfar

发表

Analytical Investigation of Chatter and Its Effective Parameters in Milling, Using Modal Experiment

Mohammad Mahdi Abootorabi Zarchi, Hamed Zoghi, Mohammad Reza Razfar, 2010 .

Multi-constrained optimization in ultrasonic-assisted turning of hardened steel by electromagnetism-like algorithm

Mohammad Reza Razfar, Masoud Farahnakian, Farid R. Biglari, 2015 .

Optimum Surface Roughness Prediction in Face Milling of High Silicon Stainless Steel

Mohammad Reza Razfar, Masoud Farahnakian, S. Elhami-Joosheghan, 2012 .

SIMULATION OF END MILLING OPERATION FOR PREDICTING CUTTING FORCES TO MINIMIZE TOOL DEFLECTION BY GENETIC ALGORITHM

Mohammad Reza Razfar, R. Jalili Saffar, R. J. Saffar, 2010 .

Research on the importance of tool–workpiece separation in ultrasonic vibration–assisted milling

Mohammad Reza Razfar, Amir Abdullah, Mohammad Mahdi Abootorabi Zarchi, 2017 .

Optimizing Surface Roughness in Face Milling Using a New Meta-Heuristic Method of Harmony Search

Mohammad Reza Razfar, R. Farshbaf Zinati, M. Haghshenas, 2010 .

Integrating Process Planning and Scheduling for Prismatic Parts Regard to Due Date

Mohammad Reza Razfar, Masoud Farahnakian, M. Haddadzade, 2009 .

Multipart setup planning through integration of process planning and scheduling

Mohammad Reza Razfar, Mohammad Hossein Fazel Zarandi, Mohammad Haddadzade, 2016 .

Integration of process planning and job shop scheduling with stochastic processing time

Mohammad Reza Razfar, M. H. Fazel Zarandi, M. Haddadzade, 2014 .

Online Dimensional Controlling System for Drilling

Mohammad Reza Razfar, Reza Farshbaf Zinati, Ahmad Habibi Zad navin, 2016 .

MULTISENSORING TOOL WEAR ESTIMATION IN FACE MILLING WITH NEURAL NETWORKS

Mohammad Reza Razfar, A Mostafa Pourasl, 2006 .

Constrained Optimization of Surface Roughness in Longitudinal Turning via Novel Modified Harmony Search

Mohammad Reza Razfar, Reza Farshbaf Zinati, 2011 .

Theoretical modeling of tool mean temperature during ultrasonically assisted turning

Mohammad Reza Razfar, Mohsen Khajehzadeh, M. Razfar, 2016 .

Optimum damage and surface roughness prediction in end milling glass fibre-reinforced plastics, using neural network and genetic algorithm

Mohammad Reza Razfar, M R Zanjani Zadeh, M. Razfar, 2009 .

An Investigation on Electrochemical Discharge Micro-Drilling of Glass

Jun Ni, Mohammad Reza Razfar, Shuhuai Lan, 2013 .

Optimum surface roughness prediction in face milling X20Cr13 by using a neural network and a genetic algorithm

Mohammad Reza Razfar, M. Haghshenas, 2009 .

The selection of milling parameters by the PSO-based neural network modeling method

Mohammad Reza Razfar, Masoud Farahnakian, Mohsen Asadnia, 2011 .

TOOL WEAR MONITORING IN FACE MILLING BY FORCE MEASURING WITH NEURAL NETWORKS

Mohammad Reza Razfar, A Mostafa Pourasl, 2006 .

Optimum surface roughness prediction in face milling X20Cr13 using particle swarm optimization algorithm

Mohammad Reza Razfar, Masoud Farahnakian, Mohsen Asadnia, 2010 .

A hybrid electromagnetism-like algorithm for integration of process planning and capacitated lot-sizing problem

Mohammad Reza Razfar, Masoud Farahnakian, A Kourank Beheshti, 2012 .

TOOL WEAR ESTIMATION IN FACE MILLING USING SPINDLE MOTOR PARAMETERS WITH NEURAL NETWORKS

Mohammad Reza Razfar, A Mostafa Pourasl, 2005 .

Novel approach to initial blank design in deep drawing using artificial neural network

Mohammad Reza Razfar, M Haddadzadeh, M R M Mamaghani, 2009 .

A New Model for Integration of Process Planning and Production Planning for Cylindrical Parts

Mohammad Reza Razfar, Masoud Farahnakian, Mohsen Khajehzadeh, 2010 .

Optimization of multi-pass face-milling via harmony search algorithm

M. Fesanghary, Mohammad Reza Razfar, R. Jalili Saffar, 2009 .

Constrained optimum surface roughness prediction in turning of X20Cr13 by coupling novel modified harmony search-based neural network and modified harmony search algorithm

Mohammad Reza Razfar, Reza Farshbaf Zinati, M. Razfar, 2012 .

Setup Planning Automation of Turned Parts Based on STEP-NC Standard

Mohammad Reza Razfar, 2011 .

Optimum surface roughness prediction in face milling by using neural network and harmony search algorithm

Mohammad Reza Razfar, Reza Farshbaf Zinati, Mahdiar Haghshenas, 2011 .

Application of GONNS to predict constrained optimum surface roughness in face milling of high-silicon austenitic stainless steel

Mohammad Reza Razfar, Masoud Farahnakian, S. Elhami, 2013 .

Optimization of machining parameters to minimize tool deflection in the end milling operation using Genetic Algorithm.

Mohammad Reza Razfar, Mohammad-Mehdi Khani, Amirhossein Salimi, 2009 .

Novel Polishing Media for Finishing Hip Joint Implants

Mohammad Reza Razfar, Mohsen Khajehzadeh, Yahya Choopani, 2021 .

Experimental investigation of the surface roughness in ultrasonic-assisted milling

Mohammad Reza Razfar, M. Razfar, P Sarvi, 2011 .

Analytical and experimental study on the integration of ultrasonically vibrated tool into the micro electro-chemical discharge drilling

Mohammad Reza Razfar, M. Razfar, S. Elhami, 2017 .

FEM and Experimental Investigation of Cutting Force During UAT Using Multicoated Inserts

Mohammad Reza Razfar, Mohsen Khajehzadeh, M. Razfar, 2015 .

Topology Optimization of a Linear Piezoelectric Micromotor Using the Smoothed Finite Element Method

Mohammad Reza Razfar, Edward J. Kansa, Semyung Wang, 2011 .

Analytical, numerical and experimental study of cutting force during thermally enhanced ultrasonic assisted milling of hardened AISI 4140

Mohammad Reza Razfar, Masoud Farahnakian, M. Razfar, 2015 .

Study of the effects of tool longitudinal oscillation on the machining speed of electrochemical discharge drilling of glass

Jun Ni, Mohammad Reza Razfar, Ali Behroozfar, 2014 .

Mechanistic modeling of cutting forces and tool flank wear in the thermally enhanced turning of hardened steel

Mohammad Reza Razfar, Masoud Farahnakian, M. Razfar, 2017 .

Experimental and Modeling Study of the Turning Process of PA 6/Nano Calcium Carbonate Composite

Mohammad Reza Razfar, Reza Farshbaf Zinati, Mehdi Haghi, 2013 .

Reliability Based Topology Optimization of a Linear Piezoelectric Micromotor Using the Cell-Based Smoothed Finite Element Method

Mohammad Reza Razfar, Edward J. Kansa, E. Kansa, 2011 .

Finite element simulation and experimental investigation of tool temperature during ultrasonically assisted turning of aerospace aluminum using multicoated carbide inserts

Mohammad Reza Razfar, Mohsen Khajehzadeh, M. Razfar, 2014 .