Giulio Lorenzini

发表

Quantum mechanics applied to the dynamic assessment of a cluster of water particles in sprinkler irrigation

D. De Wrachien, Giulio Lorenzini, D. D. Wrachien, 2012 .

Foreword to Special Issue on Advances in Optimization Methods in Heat and Mass Transfer

Gongnan Xie, Bengt Sundén, Cesare Biserni, 2015 .

SIMPLIFIED MODELLING OF SPRINKLER DROPLET DYNAMICS

Giulio Lorenzini, G. Lorenzini, 2004 .

Blood velocity field numerical assessment using a GPL code in case of intravascular Doppler catheter affections: comparative analysis of different rheological models.

Giulio Lorenzini, 2005, Journal of biomechanics.

Water drops kinematic analysis: the classic-quantum and single-multiparticle viewpoints

Daniele De Wrachien, Giulio Lorenzini, D. D. Wrachien, 2013 .

Performance of Universal Reciprocating Heat-Engine Cycle with Variable Specific Heats Ratio of Working Fluid

Lingen Chen, Huijun Feng, Chang Liu, 2020, Entropy.

CONSTRUCTAL DESIGN APPLIED TO THE STUDY OF THE GEOMETRY AND SUBMERGENCE OF AN OSCILLATING WATER COLUMN

Elizaldo Domingues dos Santos, Liércio André Isoldi, Luiz Alberto Oliveira Rocha, 2015 .

A NUMERICAL APPROACH TO SIMPLIFY THE GEOMETRY OF A PRESS HEAD FOR SHORT ALIMENTARY PASTA PRODUCTION

Angelo Fabbri, A. De Stefano, Giulio Lorenzini, 2006 .

Numerical analysis of heat removal enhancement with extended surfaces

Simone Moretti, Giulio Lorenzini, 2007 .

ARALD: Arabic Annotation Using Linked Data

Djelloul Bouchiha, Hijaz Ahmad, Abdelghani Bouziane, 2021, Ingénierie des Systèmes d Inf..

Efficient Computation for Localization and Navigation System for a Differential Drive Mobile Robot in Indoor and Outdoor Environments

Suresh Mayilswamy, Giulio Lorenzini, Sundaram Maruthachalam, 2021, Rev. d'Intelligence Artif..

Locating and Sizing of Distributed Generation Sources and Parallel Capacitors Using Multiple Objective Particle Swarm Optimization Algorithm

Mehrdad Ahmadi Kamarposhti, Giulio Lorenzini, Ahmed Amin Ahmed Solyman, 2021 .

Mapping Relational Database to OWL Ontology Based on MDE Settings

Benamar Bouougada, Djelloul Bouchiha, Hijaz Ahmad, 2021, Rev. d'Intelligence Artif..

Maximum Power Point Tracking in the Photovoltaic Module Using Incremental Conductance Algorithm with Variable Step Length

Mehrdad Ahmadi Kamarposhti, Giulio Lorenzini, Ahmed Amin Ahmed Solyman, 2021, Journal Européen des Systèmes Automatisés.

Optimal Location of Sectionners and Distributed Generation Resources to Improve Reliability in Distribution Networks

Mehrdad Ahmadi Kamarposhti, Giulio Lorenzini, Ahmed Amin Ahmed Solyman, 2021 .

Simulation and improvement of temperature distributions of a framed mould during the autoclave composite curing process

Gongnan Xie, C. Biserni, Giulio Lorenzini, 2013 .

Numerical Heat Transfer Optimization in Modular Systems of Y-Shaped Fins

Giulio Lorenzini, G. Lorenzini, Simone Moretti, 2008 .

A Bejan’s Constructal Theory Approach to the Overall Optimization of Heat Exchanging Finned Modules With Air in Forced Convection and Laminar Flow Condition

Giulio Lorenzini, G. Lorenzini, Simone Moretti, 2009 .

Overview of Computational Fluid Dynamics Simulation of Reactor-Scale Biomass Pyrolysis

Yang Yang, Fei Xu, Qingang Xiong, 2017 .

Constructal design of convective cavities inserted into a cylindrical solid body for cooling

Elizaldo Domingues dos Santos, Liércio André Isoldi, Luiz Alberto Oliveira Rocha, 2015 .

Geometrical evaluation of T-shaped high conductive pathway with thermal contact resistance for cooling of heat-generating medium

Paulo Smith Schneider, Liércio André Isoldi, Luiz Alberto Oliveira Rocha, 2017 .

SPRINKLER IRRIGATION SYSTEMS: STATE‐OF‐THE‐ART OF KINEMATIC ANALYSIS AND QUANTUM MECHANICS APPLIED TO WATER JETS

Marco Medici, Daniele De Wrachien, Giulio Lorenzini, 2013 .

Experimental analysis of the air flow field over a hot flat plate

Giulio Lorenzini, G. Lorenzini, 2006 .

Computational Fluid Dynamics (CFD) Picture of Water Droplet Evaporation in Air

Daniele De Wrachien, Giulio Lorenzini, D. D. Wrachien, 2012 .

Bejan’s Constructal Theory Analysis of Gas-Liquid Cooled Finned Modules

Giulio Lorenzini, Simone Moretti, 2011 .

Optimization Design and Analysis of Multilayer Lightweight Thermal Protection Structures Under Aerodynamic Heating Conditions

Wang Qi, Gongnan Xie, Bengt Sundén, 2013 .

Constructal Design of Cavities Inserted Into a Cylindrical Solid Body

Elizaldo Domingues dos Santos, Liércio André Isoldi, C. Biserni, 2012 .

Constructal Design of Convective Y-Shaped Cavities by Means of Genetic Algorithm

Liércio André Isoldi, Luiz Alberto Oliveira Rocha, Cesare Biserni, 2014 .

Constructal design of X-shaped conductive pathways for cooling a heat-generating body

C. Biserni, Luiz Alberto Oliveira Rocha, Giulio Lorenzini, 2013 .

Transient conjugate heat transfer in straight microchannels

Yogesh Jaluria, Giulio Lorenzini, Alessandra Conti, 2012 .

Constructal design of I-shaped high conductive pathway for cooling a heat-generating medium considering the thermal contact resistance

Paulo Smith Schneider, Liércio André Isoldi, Luiz Alberto Oliveira Rocha, 2016 .

Air temperature effect on spray evaporation in sprinkler irrigation

Giulio Lorenzini, 2002 .

WATER DROPLET DYNAMICS AND EVAPORATION IN AN IRRIGATION SPRAY

Giulio Lorenzini, 2006 .

The Constructal law: from design in nature to social dynamics and wealth as physics: comment on "The Constructal law and the evolution of design in nature" by Professor Adrian Bejan and Professor Sylvie Lorente.

Cesare Biserni, Giulio Lorenzini, G. Lorenzini, 2011, Physics of life reviews.

Constructal design of T-shaped assemblies of fins cooling a cylindrical solid body

Liércio André Isoldi, Luiz Alberto Oliveira Rocha, Cesare Biserni, 2014 .

Geometric optimization of a convective T-shaped cavity on the basis of constructal theory

C. Biserni, Luiz Alberto Oliveira Rocha, Giulio Lorenzini, 2012 .

Influences of an effective Prandtl number model on nano boundary layer flow of γ Al2O3–H2O and γ Al2O3–C2H6O2 over a vertical stretching sheet

Mohammad Mehdi Rashidi, A. K. Abdul Hakeem, Giulio Lorenzini, 2016 .

A numerical study of the flow disturbance caused by an intravascular Doppler catheter in a blood vessel

Viale Risorgimento, Giulio Lorenzini, 1998 .

Constructal Design of Complex Assembly of Fins

Elizaldo Domingues dos Santos, Luiz Alberto Oliveira Rocha, Giulio Lorenzini, 2011 .

Geometric optimization of X-shaped cavities and pathways according to Bejan’s theory: Comparative analysis

Luiz Alberto Oliveira Rocha, Cesare Biserni, Giulio Lorenzini, 2014 .

Constructal design of Y-shaped assembly of fins

Luiz Alberto Oliveira Rocha, Giulio Lorenzini, L. Rocha, 2006 .

Numerical analysis on heat removal from Y-shaped fins: Efficiency and volume occupied for a new approach to performance optimisation

Giulio Lorenzini, G. Lorenzini, Simone Moretti, 2007 .

A LBM–DEM solver for fast discrete particle simulation of particle–fluid flows

Qingang Xiong, Giulio Lorenzini, G. Lorenzini, 2014 .

Non-uniform heat source/sink and Soret effects on MHD non-Darcian convective flow past a stretching sheet in a micropolar fluid with radiation

Mohammad Mehdi Rashidi, Mostafa Safdari Shadloo, Giulio Lorenzini, 2016 .

Connectionist intelligent model estimates of convective heat transfer coefficient of nanofluids in circular cross-sectional channels

Fathollah Pourfayaz, Alireza Baghban, Alibakhsh Kasaeian, 2018, Journal of Thermal Analysis and Calorimetry.

CONSTRUCTAL DESIGN OF ISOTHERMAL X-SHAPED CAVITIES

Liércio André Isoldi, Luiz Alberto Oliveira Rocha, Cesare Biserni, 2014 .

Magnetic field and internal heat generation effects on the free convection in a rectangular cavity filled with a porous medium saturated with Cu–water nanofluid

Mohammad Mehdi Rashidi, Ahmed Rashad, Giulio Lorenzini, 2017 .

Constructal design of T–Y assembly of fins for an optimized heat removal

Luiz Alberto Oliveira Rocha, Giulio Lorenzini, L. Rocha, 2009 .

Significance of exponential space- and thermal-dependent heat source effects on nanofluid flow due to radially elongated disk with Coriolis and Lorentz forces

Giulio Lorenzini, Basavarajappa Mahanthesh, G. Lorenzini, 2019, Journal of Thermal Analysis and Calorimetry.

Water droplet trajectories in an irrigation spray: the classical and quantum mechanical pictures.

D. De Wrachien, Stefano Mambretti, Giulio Lorenzini, 2012 .

Constructal design applied to the optimization of complex geometries: T-Y-shaped cavities with two additional lateral intrusions cooled by convection

C. Biserni, Luiz Alberto Oliveira Rocha, E. D. dos Santos, 2012 .

Geometric optimization of T-shaped constructs coupled with a heat generating basement: A numerical approach motivated by Bejan’s constructal theory

Luiz Alberto Oliveira Rocha, Cesare Biserni, Giulio Lorenzini, 2017 .

Optimization of Pin-Fins for a Heat Exchanger by Entropy Generation Minimization and Constructal Law

Gongnan Xie, Yidan Song, Giulio Lorenzini, 2015 .

Constructal design applied to the elastic buckling of thin plates with holes

Cesare Biserni, Giulio Lorenzini, Elizaldo Domingues Santos, 2013 .

Genetic Algorithm Applied to Geometric Optimization of Isothermal Y-Shaped Cavities

Elizaldo Domingues dos Santos, Liércio André Isoldi, Luiz Alberto Oliveira Rocha, 2014 .

Casson fluid flow: Free convective heat and mass transfer over an unsteady permeable stretching surface considering viscous dissipation

Stanford Shateyi, Giulio Lorenzini, Fazle Mabood, 2017 .

Constructal law optimization of a boiler

Maurizio Cellura, Francesco Guarino, Teresa Maria Gulotta, 2017 .

WATER PARTICLE KINEMATICS QUANTUM APPROACH: A CHALLENGE FOR SPRINKLER IRRIGATION SYSTEMS

D. De Wrachien, Stefano Mambretti, Giulio Lorenzini, 2013 .

Computational fluid-dynamics-based analysis of a ball valve performance in the presence of cavitation

Gongnan Xie, Cesare Biserni, Giulio Lorenzini, 2014 .

Thermal fluid dynamic modelling of a water droplet evaporating in air

Onorio Saro, Giulio Lorenzini, G. Lorenzini, 2013 .

Constructal design of non-uniform X-shaped conductive pathways for cooling

C. Biserni, Luiz Alberto Oliveira Rocha, Giulio Lorenzini, 2013 .

A "TOCHNOG" APPLICATION FOR BLOOD FLOW SIMULATION IN HUMAN VESSELS

Giulio Lorenzini, 2004 .

Evolution in the Design of V-Shaped Highly Conductive Pathways Embedded in a Heat-Generating Piece

O. Joneydi Shariatzadeh, Cesare Biserni, M. R. Hajmohammadi, 2015 .

Constructal Design Applied to the Geometric Optimization of Y-shaped Cavities Embedded in a Conducting Medium

Liércio André Isoldi, C. Biserni, Luiz Alberto Oliveira Rocha, 2011 .

Geometric optimization of T-Y-shaped cavity according to Constructal design

Luiz Alberto Oliveira Rocha, Giulio Lorenzini, L. Rocha, 2009 .

Material combinations and parametric study of thermal and mechanical performance of pyramidal core sandwich panels used for hypersonic aircrafts

Gongnan Xie, Giulio Lorenzini, G. Xie, 2016 .

CFD analysis of pulsatile blood flow in an atherosclerotic human artery with eccentric plaques.

Giulio Lorenzini, G. Lorenzini, Erminio Casalena, 2008, Journal of biomechanics.

WATER DROPLET TRAJECTORIES IN A SPRINKLER JET FLOW: THE QUANTUM HYDRODYNAMIC FRAMEWORK

Marco Medici, Daniele De Wrachien, Giulio Lorenzini, 2014 .

Geometric optimization of isothermal cavities according to Bejan’s theory

C. Biserni, Luiz Alberto Oliveira Rocha, Giulio Lorenzini, 2011 .

Effects of Cu and Ag nano-particles on flow and heat transfer from permeable surfaces

Hamid Maleki, M. R. Hajmohammadi, S. Salman Nourazar, 2015 .

A Vapotron Effect Application for Electronic Equipment Cooling

C. Biserni, Giulio Lorenzini, G. Lorenzini, 2003 .