Hugues Somja

发表

Residual stiffness and strength of shear connectors in steel-concrete composite beams after being subjected to a pull-out pre-damaging : An experimental investigation

Jean-Marc Battini, Piseth Heng, Mihai Bud, 2017 .

Erratum to “Efficiency of Eurocode 8 design rules for steel and steel–concrete composite structures” [Journal of Constructional Steel Research 112 (2015) 108–129]

Hervé Degée, Benno Hoffmeister, Spyros A. Karamanos, 2015 .

Influence of variability of material mechanical properties on seismic performance of steel and steel–concrete composite structures

Hugues Somja, Mohammed Hjiaj, Walter Salvatore, 2017, Bulletin of Earthquake Engineering.

On the weak storey behaviour of concentrically braced steel frames

Hugues Somja, Mohammed Hjiaj, János Lógó, 2014 .

Strut-and-tie model for the support of steel beams crossing concrete beams

Hugues Somja, Frédéric Marie, 2018 .

Experimental Study of the Behavior of a Steel-Concrete Hybrid Thermal Break System Under Vertical Actions

Hugues Somja, Pisey Keo, B. Le Gac, 2018 .

A new strategy for analysis of erection stages including an efficient method for creep analysis

Hugues Somja, V. de Ville de Goyet, 2008 .

THE SMARTCOCO DESIGN GUIDE FOR HYBRID CONCRETE-STEEL STRUCTURES

Hervé Degée, Hugues Somja, Mohammed Hjiaj, 2018 .

Plasticity-based method to avoid weak storey behaviour of concentrically braced frames

Hugues Somja, Mohammed Hjiaj, Jean-Marie Aribert, 2014 .

Effects of material variability on the ductility of composite beams and overstrength coefficients

Hugues Somja, Mohammed Hjiaj, Quang-Huy Nguyen, 2013 .

An innovative concrete-steel structural system for long-span structure allowing a fast and simple erection

Nicolas Boissonnade, Piseth Heng, Hugues Somja, 2019 .

On the behaviour of concentrically braced frames subjected to seismic loading

Hugues Somja, János Lógó, Dániel B. Merczel, 2013 .

New beam-to-beam joint with concrete embedding for composite bridges: Experimental study and finite element modelling

Hugues Somja, Alain Lachal, SaoSerey Kaing, 2012 .

Numerical Modelling of Composite Beam-to-Beam Joints — Innovative Solutions

Hugues Somja, Samy Guezouli, Alain Lachal, 2011 .

Overstrength demands for joints in composite frames with account of the actual European steel production

Hugues Somja, Mohammed Hjiaj, Quang-Huy Nguyen, 2011 .

Simplified design method for slender hybrid columns

Hugues Somja, Mohammed Hjiaj, Quang-Huy Nguyen, 2015 .

Efficiency of Eurocode 8 design rules for steel and steel-concrete composite structures

Hervé Degée, Benno Hoffmeister, Spyros A. Karamanos, 2015 .

perfects module forming a thermal bridge for isolated buildings by outside

Hugues Somja, Franck Palas, Gac Benoit Le, 2015 .

Local formulation for elasto-plastic corotational thin-walled beams based on higher-order curvature terms

Jean-Marc Battini, Hugues Somja, Mohammed Hjiaj, 2011 .

Influence of Imperfections in FEM Modeling of Lateral Torsional Buckling

Nicolas Boissonnade, Hugues Somja, N. Boissonnade, 2012 .

Experimental Study of the Composite Timber- Concrete SBB Connection under Monotonic and Reversed-Cyclic Loadings

Hugues Somja, Mohammed Hjiaj, Quang-Huy Nguyen, 2014 .

Geometrically nonlinear analysis of hybrid beam–column with several encased steel profiles in partial interaction

Hugues Somja, Mohammed Hjiaj, Quang-Huy Nguyen, 2015 .

Behavior of a new shear connector for U-shaped steel-concrete hybrid beams

Hugues Somja, Pisey Keo, Frank Palas, 2018, Journal of Constructional Steel Research.

Effect of the steel material variability on the seismic capacity design of steel-concrete composite structures: a parametric study

Hugues Somja, Mohammed Hjiaj, Hervé Degee, 2013, Bulletin of Earthquake Engineering.