Aiden A. Martin

发表

Gas-mediated charged particle beam processing of nanostructured materials

Igor Aharonovich, Charlene J. Lobo, Christopher Elbadawi, 2014, Photonics West - Lasers and Applications in Science and Engineering.

Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2019, Advanced Engineering Materials.

Pressure dependence of the laser-metal interaction under laser powder bed fusion conditions probed by in situ X-ray imaging

Aiden A. Martin, K. Fezzaa, M. Matthews, 2020 .

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

Aiden A. Martin, M. Matthews, P. J. Depond, 2020, Communications Materials.

Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging

Manyalibo J. Matthews, Nicholas P. Calta, Aiden A. Martin, 2019, Materials Today Advances.

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Michael F Toney, Tony van Buuren, Christopher J. Tassone, 2019, Nature Communications.

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes.

Michael F Toney, Christopher J. Tassone, Aiden A. Martin, 2018, The Review of scientific instruments.

Dynamic Pattern Formation in Electron-Beam-Induced Etching.

Aiden A. Martin, M. Toth, I. Aharonovich, 2015, Physical review letters.

Emergent formation of dynamic topographic patterns in electron beam induced etching

Aiden A. Martin, M. Toth, I. Aharonovich, 2015, 1509.05963.

Fluorescent TiO2 powders prepared using a new perylene diimide dye: applications in latent fingermark detection.

Aiden A. Martin, A. McDonagh, C. Lennard, 2007, Forensic science international.

A laser powder bed fusion system for operando synchrotron x-ray imaging and correlative diagnostic experiments at the Stanford Synchrotron Radiation Lightsource.

Christopher J. Tassone, Aiden A. Martin, J. Weker, 2022, The Review of scientific instruments.

Fabrication of a single sub-micron pore spanning a single crystal (100) diamond membrane and impact on particle translocation

Aiden A. Martin, M. Toth, I. Aharonovich, 2017 .

Subtractive 3D Printing of Optically Active Diamond Structures

Igor Aharonovich, Milos Toth, Aiden A. Martin, 2014, Scientific reports.

Localized chemical switching of the charge state of nitrogen-vacancy luminescence centers in diamond

Aiden A. Martin, M. Toth, I. Aharonovich, 2014, 1406.0987.

Radiation-Induced Damage and Recovery of Ultra-Nanocrystalline Diamond: Toward Applications in Harsh Environments.

Aiden A. Martin, M. Toth, I. Aharonovich, 2017, ACS applied materials & interfaces.

Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2020 .

Electron beam induced chemical dry etching and imaging in gaseous NH3 environments

Aiden A. Martin, M. Toth, M. Phillips, 2012, Nanotechnology.

Dynamic surface site activation: a rate limiting process in electron beam induced etching.

Aiden A. Martin, M. Toth, M. Phillips, 2013, ACS applied materials & interfaces.

Melt-Pool Dynamics and Microstructure of Mg Alloy WE43 under Laser Powder Bed Fusion Additive Manufacturing Conditions

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2022, Crystals.

Unconventional Pathways to Carbide Phase Synthesis via Thermal Decomposition of UI4(1,4-dioxane)2.

Chinthaka M. Silva, Aiden A. Martin, J. Jeffries, 2022, Inorganic chemistry.

Laser-induced thermal decomposition of uranium triiodide and ammonium uranium fluoride

Chinthaka M. Silva, Aiden A. Martin, T. Heo, 2021, Journal of Radioanalytical and Nuclear Chemistry.

Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing

Aiden A. Martin, M. Matthews, A. Rubenchik, 2020, Science.

A mesoscopic digital twin that bridges length and time scales for control of additively manufactured metal microstructures

Aiden A. Martin, J. Fattebert, M. Matthews, 2021 .

Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy

Aiden A. Martin, M. Matthews, T. Willey, 2021 .

Formation mechanisms of boron oxide films fabricated by large-area electron beam-induced deposition of trimethyl borate

Aiden A. Martin, P. J. DePond, 2018, Beilstein journal of nanotechnology.

Cryogenic electron beam induced chemical etching.

Aiden A. Martin, M. Toth, 2014, ACS applied materials & interfaces.

Exposure and analysis of microparticles embedded in silica aerogel keystones using NF3‐mediated electron beam–induced etching and energy‐dispersive X‐ray spectroscopy

Aiden A. Martin, A. Westphal, J. Beeman, 2016 .

Microcrack mitigation during laser scanning of tungsten via preheating and alloying strategies

Aiden A. Martin, M. Matthews, B. Vrancken, 2021 .

Formation of high purity uranium via laser induced thermal decomposition of uranium nitride

Aiden A. Martin, T. Heo, Y. Idell, 2020 .

Submicrosecond Aggregation during Detonation Synthesis of Nanodiamond.

Aiden A. Martin, L. Fried, T. Willey, 2021, The journal of physical chemistry letters.

Subtractive 3D Printing of Optically Active Diamond Structures

Aiden A. Martin, M. Toth, I. Aharonovich, 2014, Scientific Reports.

Electron beam controlled restructuring of luminescence centers in polycrystalline diamond.

Aiden A. Martin, C. Zachreson, M. Toth, 2014, ACS applied materials & interfaces.

Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing

Christopher J. Tassone, Aiden A. Martin, Andrew M. Kiss, 2020, Scientific Reports.