Krzysztof Komeza

发表

Coupling field analysis and non-deterministic optimization by means of multiprocessor parallel computation for characterizing magnetic anisotropy

P. Di Barba, Krzysztof Komeza, E. Napieralska Juszczak, 2011 .

Dependence of the Contact Resistance on the Design of Stranded Conductors

Krzysztof Komeza, Youcef Zeroukhi, Ewa Napieralska-Juszczak, 2014, Sensors.

Transient states analysis of 3D transformer structure

Krzysztof Komeza, Slawomir Wiak, H. Welfle, 1998 .

Performance Characteristics of a High-Speed Energy-Saving Induction Motor With an Amorphous Stator Core

Krzysztof Komeza, Maria Dems, K. Komeza, 2014, IEEE Transactions on Industrial Electronics.

Numerical modeling of 3D intelligent comb drive accelerometer structure: Mechanical models

Krzysztof Komeza, Slawomir Wiak, Krzysztof Smółka, 2006 .

Automated B-H curve identification algorithm combining field simulation with optimisation methods and exploiting parallel computation

P. Di Barba, Krzysztof Komeza, N. Hihat, 2012 .

Variation of additional losses at no-load and full-load for a wide range of rated power induction motors

Krzysztof Komeza, M. Dems, J-Ph. Lecointe, 2017 .

Recent Developments of Electrical Drives

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2006 .

Influence of different magnetic material of the high-speed induction motors cores on motors fields distribution and integral parameters

Krzysztof Komeza, M. Dems, J. Szulakowski, 2010 .

Determination of performance parameters of a small-size high-speed induction motor using the field-circuit method

Krzysztof Komeza, M. Dems, 2011 .

Analysis of effects of magnetic slot wedges on characteristics of large induction motor

Jan K. Sykulski, Krzysztof Komeza, M. Dems, 2012 .

Zastosowanie obliczeniowej mechaniki płynów do wyznaczania współczynnika przejmowania ciepła na drodze konwekcji dla obudowy silnika indukcyjnego

Marcin Lefik, Krzysztof Komeza, 2012 .

COMPUTATION OF ROTOR WINDINGS POWER LOSSES IN SQUIRREL‐CAGE INDUCTION MOTOR

Krzysztof Komeza, Slawomir Wiak, M. Dems, 1995 .

Finite-Element and Analytical Calculations of No-Load Core Losses in Energy-Saving Induction Motors

Krzysztof Komeza, Maria Dems, K. Komeza, 2012, IEEE Transactions on Industrial Electronics.

Numerical models and experimental verification of small size asynchronous electromechanical converter with stator core made from amorphous iron

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2006 .

Computer modelling of 3D transient thermal field coupled with electromagnetic field in three‐phase induction motor on load

Marcin Lefik, Krzysztof Komeza, X. M. Lopez-Fernandez, 2010 .

Analytical and field-circuit core loss prediction in induction motors

Daniel Roger, Krzysztof Komeza, M. Dems, 2012 .

Core losses of the induction motor operating in a wide frequency range supplied from the inverter

Krzysztof Komeza, M. Dems, Krzysztof Majer, 2020 .

3D electro-mechanical modeling of conductor after stranding and compacting process simulation

Krzysztof Komeza, Youcef Zeroukhi, Guillaume Vega, 2014 .

Simplified models including eddy currents for laminated structures

Krzysztof Komeza, Ewa Napieralska-Juszczak, Jean-Philippe Lecointe, 2010 .

3D harmonic model of the end region for turbogenerators

Krzysztof Komeza, Raphael Romary, Jakub Andrzejewski, 2012 .

Coupling of the evolution strategy algorithm and genetic algorithm with finite element mesh adaptation

Paolo Di Barba, Krzysztof Komeza, Piotr Napieralski, 2012 .

Advanced computer modelling of no-load curves of the high-speed small size induction motors

Krzysztof Komeza, M. Dems, J. Szulakowski, 2010 .

Numerical (solid) modeling of 3-D intelligent comb drive accelerometer structure - mechanical problems

Krzysztof Komeza, Slawomir Wiak, Krzysztof Smółka, 2006 .

FIELD AND FORCE CALCULATION OF ELECTROMAGNET WITH HIGH FREQUENCY OPERATION

Krzysztof Komeza, Slawomir Wiak, J. Tarocinski, 1992 .

Computer modelling of 3D transient thermal field coupled with electromagnetic field in one‐phase induction motor with locked rotor

Marcin Lefik, Krzysztof Komeza, 2008 .

Application of circuit and field‐circuit methods in designing process of small induction motors with stator cores made from amorphous iron

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2006 .

Analysis of the influence of the assumption of equivalent saturation on starting currents in induction motors

Krzysztof Komeza, 2000 .

Architecture choices for high-temperature synchronous machines

Marcin Lefik, Krzysztof Komeza, Piotr Napieralski, 2020 .

Influence of the closing rotor slots on the additional losses in the induction motor

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2015 .

Identification of current flow depending on the mechanical deformation in a stranded cable

Krzysztof Komeza, Youcef Zeroukhi, Guillaume Vega, 2013 .

Analysis of normal, perpendicular and longitudinal fluxes and eddy currents in anisotropic laminated structures

Krzysztof Komeza, E. Napieralska Juszczak, N. Hihat, 2010 .

Computer Modelling of Energy-Saving Small Size Induction Electromechanical Converter

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2008 .

The Influence of Electrical Sheet on the Core Losses at No-Load and Full-Load of Small Power Induction Motors

Krzysztof Komeza, Maria Dems, K. Komeza, 2017, IEEE Transactions on Industrial Electronics.

The highly efficient three‐phase small induction motors with stator cores made from amorphous iron

Krzysztof Komeza, Slawomir Wiak, M. Dems, 2004 .

Dynamic Simulation of High-Speed Induction Motor

Krzysztof Komeza, Maria Dems, Witold Kubiak, 2021 .

ELECTROMAGNETIC FIELD CALCULATION OF A LEAKAGE TRANSFORMER BY MEANS OF FINITE ELEMENT METHOD WITH HERMITIAN ELEMENTS

Slawomir Wiak, Krzysztof Komeza, 1994 .

Field and circuit calculation of the core losses in the energy-saving small-size induction motor

Krzysztof Komeza, Maria Dems, K. Komeza, 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

Comparative computation of forces and torques of electromagnetic devices by means of different formulae

Slawomir Wiak, Krzysztof Komeza, A. Pelikant, 1994 .

Calculations of heat transfer coefficient and equivalent thermal conductivity for induction motors thermal analysis

Krzysztof Komeza, M. Lefik, X. M. Lopez-Fernandez, 2014 .

Comparison of the reluctance laminated and solid rotor synchronous machine operating at high temperatures

Daniel Roger, Marcin Lefik, Krzysztof Komeza, 2019, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering.