Shiv Gopal Kapoor

发表

A mechanistic force model for combined axial–radial contour turning

Rohit G. Reddy, Richard E. DeVor, Shiv Gopal Kapoor, 2001 .

Dynamic Generation of Machined Surfaces, Part 2: Construction of Surface Topography

G. M. Zhang, Shiv Gopal Kapoor, G. M. Zhang, 1991 .

Force prediction in thread milling

Anna Carla Araujo, Shiv Gopal Kapoor, Jose Luis Silveira, 2004 .

An Elastodynamic Model of Frictional Contact and Its Influence on the Dynamics of a Workpiece-Fixture System

Richard E. DeVor, Shiv Gopal Kapoor, B. Fang, 2001 .

An Enhanced Quality Evaluation System for Continuous Manufacturing Processes, Part 2: Application

Shiv Gopal Kapoor, Kevin J. Dooley, K. Dooley, 1988 .

A Hybrid Methodology for Kinematic Calibration of Micro/Meso-Scale Machine Tools (mMTs)

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

Machining-Induced Residual Stress: Experimentation and Modeling

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2000 .

Analysis of Feed Errors in Tapping by Contact Stress Model

Richard E. DeVor, Shiv Gopal Kapoor, Ajit Pal S Dogra, 2002 .

An Enhanced Cutting Force Model for Face Milling With Variable Cutter Feed Motion and Complex Workpiece Geometry

Richard E. DeVor, Shiv Gopal Kapoor, F. Gu, 1997 .

Design and Manufacture of a Flexure-based XYZ-force Sensor

Placid Mathew Ferreira, Shiv Gopal Kapoor, Jorge E. Correa, 2016 .

An Enhanced Quality Evaluation System for Continuous Manufacturing Processes, Part 1: Theory

Shiv Gopal Kapoor, Kevin J. Dooley, K. Dooley, 1990 .

Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry

Richard E. DeVor, Shiv Gopal Kapoor, Ajit Pal S Dogra, 1999, Manufacturing Science and Engineering.

Use of radial forces for fault detection in tapping

Richard E. DeVor, Shiv Gopal Kapoor, William A. Kline, 2002 .

Chisel edge and cutting lip shape optimization for improved twist drill point design

Richard E. DeVor, Shiv Gopal Kapoor, Anish Paul, 2005 .

APPLICATION OF A TWO-STEP OPTIMIZATION TECHNIQUE TO AN ECONOMIC DISPATCH PROBLEM IN A HYDRO-THERMAL-PURCHASED POWER NETWORK

Shiv Gopal Kapoor, V. L. Borre, 1984 .

A Chisel Edge Model for Arbitrary Drill Point Geometry

Richard E. DeVor, Shiv Gopal Kapoor, Anish Paul, 2005 .

OPTIMAL DESIGN OF TOOTH SPACING IN FACE MILLING VIA A DYNAMIC FORCE MODEL.

Richard E. DeVor, Shiv Gopal Kapoor, H. J. Fu, 1984 .

A dual-mechanism approach to the prediction of machining forces, part 2: Calibration and validation

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1995 .

Model-Based Analysis of the Surface Generation in Microendmilling—Part I: Model Development

Richard E. DeVor, Shiv Gopal Kapoor, Xinyu Liu, 2007 .

Investigation of the Dynamics of Microend Milling—Part I: Model Development

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Influence of Thermal Effects on Hole Quality in Dry Drilling, Part 2: Thermo-Elastic Effects on Hole Quality

Richard E. DeVor, Shiv Gopal Kapoor, Shiva Kalidas, 2002 .

Mechanistic model for the reaming process with emphasis on process faults

Richard E. DeVor, Shiv Gopal Kapoor, Onik Bhattacharyya, 2006 .

Microstructure-Level Model for the Prediction of Tool Failure in Coated WC-Co Cutting Tool Materials During Intermittent Cutting

Richard E. DeVor, Shiv Gopal Kapoor, Sunghyuk Park, 2007 .

An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures With Complex Dynamics, Part 1: Simulation Results

Richard E. DeVor, Shiv Gopal Kapoor, R. Radulescu, 1997 .

A labeling algorithm for the navigation of automated guided vehicles

Shiv Gopal Kapoor, Udatta S. Palekar, J. Huang, 1993 .

Mechanistic Modeling of the Ball End Milling Process for Multi-Axis Machining of Free-Form Surfaces

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 2001 .

Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

Single-Subgroup Performance Measures and Diagnostic Procedures for X-Bar Control Charts

Shiv Gopal Kapoor, R. E. DeVor, G. E. Rahn, 1994 .

Experimental investigation of a combined drilling and thread milling process: Thrilling

Anna Carla Araujo, Martin B.G. Jun, Richard E. DeVor, 2007 .

Dynamic Generation of Machined Surfaces Part 1: Description of a Random Excitation System

G. M. Zhang, Shiv Gopal Kapoor, S. Kapoor, 1991 .

Analysis of Force Shape Characteristics and Detection of Depth-of-Cut Variations in End Milling

Liuqing Yang, Richard E. DeVor, Shiv Gopal Kapoor, 2005 .

Dynamic variable depth of cut machining using piezoelectric actuators

Tsu-Chin Tsao, Shiv Gopal Kapoor, J. D. Rasmussen, 1994 .

Modeling chip-evacuation forces in drilling for various flute geometries

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

Experimental Investigation of Thread Formation in Form Tapping

Richard E. DeVor, Shiv Gopal Kapoor, Curtis Warrington, 2005 .

Transforming the Landscape of Manufacturing: Distributed Manufacturing Based on Desktop Manufacturing (DM)2

Jian Cao, Kornel Ehmann, Richard E. DeVor, 2012 .

Model-Based Analysis of the Surface Generation in Microendmilling—Part II: Experimental Validation and Analysis

Richard E. DeVor, Shiv Gopal Kapoor, Xinyu Liu, 2007 .

Investigation of the Dynamics of Microend Milling—Part II: Model Validation and Interpretation

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

A model for the prediction of bore cylindricity during machining

Richard E. DeVor, Shiv Gopal Kapoor, G. Subramani, 1991 .

Analysis of Force Shape Characteristics and Detection of Depth-of-Cut Variations in End Milling

Liuqing Yang, Richard E. DeVor, Shiv Gopal Kapoor, 2005 .

Influence of Friction Damping on Workpiece-Fixture System Dynamics and Machining Stability

Richard E. DeVor, Shiv Gopal Kapoor, B. Fang, 2002 .

Development of an automated microfactory: Part 2 - Experimentation and analysis

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

Modeling of cutting forces in a face-milling operation with self-propelled round insert milling cutter

Shiv Gopal Kapoor, Suhas S. Joshi, Pradeep Kumar Baro, 2005 .

An Acoustic Emission-Based Method for Determining Contact Between a Tool and Workpiece at the Microscale

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

A Stability Solution for the Axial Contour-Turning Process

Rohit G. Reddy, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

An Integrated Quality Systems Approach to Quality and Productivity Improvement in Continuous Manufacturing Processes

Richard E. DeVor, Shiv Gopal Kapoor, Kevin J. Dooley, 1986 .

Modeling and prediction of hole profile in drilling, Part 1: modeling drill dynamics in the presence of drill alignment errors

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

Modeling and Prediction of Hole Profile in Drilling, Part 2: Modeling Hole Profile

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

The application of ultrasonic ranging and group technology concepts to robot material handling tasks

Shiv Gopal Kapoor, Albert J. Wavering, S. Kapoor, 1989 .

A Dual-Mechanism Approach to the Prediction of Machining Forces, Part 1: Model Development

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1995 .

Analytical Stability Analysis of Variable Spindle Speed Machining

Richard E. DeVor, Shiv Gopal Kapoor, S. Jayaram, 2000 .

A NEW MECHANISTIC MODEL FOR PREDICTING WORN TOOL CUTTING FORCES

Richard E. DeVor, Shiv Gopal Kapoor, David W. Smithey, 2001 .

RUNWAY ROUGHNESS CHARACTERIZATION BY DDS APPROACH

Shiv Gopal Kapoor, S. M. Wu, Farrokh Nassirpour, 1978 .

Analysis of grinding dynamics by Dynamic Data System methodology

Shiv Gopal Kapoor, S. M. Wu, E. Garcia-Gardea, 1981 .

Modeling chip-evacuation forces and prediction of chip-clogging in drilling

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2002 .

Study of the mechanics of the micro-groove cutting process

Richard E. DeVor, Shiv Gopal Kapoor, Keith A. Bourne, 2011 .

A new acceleration-based methodology for micro/meso-scale machine tool performance evaluation

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Phillip, 2006 .

An architecture for the development of multi-component software tools for virtual manufacturing

Richard E. DeVor, Shiv Gopal Kapoor, Patrick N. Bless, 2002 .

Mechanistic Force Models for Chip Control Tools

Richard E. DeVor, Shiv Gopal Kapoor, S. M. Athavale, 1999 .

Machining Process Modeling: A Review

Kornel Ehmann, Richard E. DeVor, Shiv Gopal Kapoor, 1997 .

MODELING AND FORECASTING OF MANEUVERING TANK POSITION FOR GUN FIRE CONTROL.

S. M. Wu, Shiv Gopal Kapoor, N. Coleman, 1979 .

An Integrated Machining Process Design Simulator for the Optimal Design of Face Milling Systems

Richard E. DeVor, Shiv Gopal Kapoor, S. J. Lee, 1985 .

Finite Element Modeling for Tap Design Improvement in Form Tapping

Richard E. DeVor, Shiv Gopal Kapoor, Curtis Warrington, 2006 .

Temperature Distribution in a Hollow Cylindrical Workpiece During Machining: Theoretical Model and Experimental Results

Richard E. DeVor, Shiv Gopal Kapoor, G. Subramani, 1990 .

Modeling and analysis of aerodynamic noise in milling cutters

Richard E. DeVor, Shiv Gopal Kapoor, Karthikeyan Sampath, 2007 .

Internet-based model for technology integration and access, Part 1: Software and hardware testbed models

Richard E. DeVor, Shiv Gopal Kapoor, Ganesan Venkatasubramanian, 1995 .

Machinability of MADI

Shiv Gopal Kapoor, Parag Hegde, Alan P. Druschitz, 2005 .

Cutting Process Dynamics Simulation for Machine Tool Structure Design

Shiv Gopal Kapoor, S. J. Lee, 1986 .

Piezoelectric tool servo system for variable depth of cut machining

Tsu-Chin Tsao, Shiv Gopal Kapoor, J. D. Rasmussen, 1992 .

A model for thread milling cutting forces

Anna Carla Araujo, Martin B.G. Jun, Richard E. DeVor, 2006 .

Development of operational characteristics and diagnostic procedures for X̄ control charts

Richard E. DeVor, Shiv Gopal Kapoor, Gregory E. Rahn, 1991 .

Modeling and Prediction of Cutting Noise in the Face-Milling Process

Richard E. DeVor, Shiv Gopal Kapoor, Karthikeyan Sampath, 2007 .

A worn tool force model for three-dimensional cutting operations

Richard E. DeVor, Shiv Gopal Kapoor, David W. Smithey, 2000 .

A Model-Based Monitoring and Fault Diagnosis Methodology for Free-Form Surface Machining Process

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 2003 .

Nonlinear influence of effective lead angle in turning process stability

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2002 .

An Experimental Evaluation of an Atomization-Based Cutting Fluid Application System for Micromachining

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

Navigation planning for mobile robotic devices in modular warehouses

Shiv Gopal Kapoor, S. R. Menon, R. B. Blackmon, 1988 .

Estimation of the specific cutting pressures for mechanistic cutting force models

Richard E. DeVor, Shiv Gopal Kapoor, S. Jayaram, 2001 .

Study of a High Performance AFM Probe-Based Microscribing Process

Richard E. DeVor, Shiv Gopal Kapoor, Keith A. Bourne, 2010 .

A methodology for integrated quality systems

Richard E. DeVor, Shiv Gopal Kapoor, M. I. Dessouky, 1987 .

A SHAPE AND SIZE OPTIMIZATION ALGORITHM FOR MACHINE TOOL ELEMENT DESIGN

Shiv Gopal Kapoor, S. J. Lee, S. J. Lee, 1986 .

An Acoustic Emission-Based Method for Determining Relative Orientation Between a Tool and Workpiece at the Micro-Scale

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Estimation of effective error parameters in high-speed micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2007 .

Modeling of turning process cutting forces for grooved tools

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 2002 .

A Mechanistic Model to Predict the Cutting Force System for Arbitrary Drill Point Geometry

Richard E. DeVor, Shiv Gopal Kapoor, V. Chandrasekharan, 1998 .

Prediction of Thread Quality by Detection and Estimation of Tapping Faults

Richard E. DeVor, Shiv Gopal Kapoor, O. Mezentsev, 2002 .

Process Monitoring During Micro-Drilling via Acoustic Emission, Ultrasonic Sound, and Spindle Load Sensors

Shiv Gopal Kapoor, Keith A. Bourne, 2012 .

Effect of groove-type chip breakers on twist drill performance

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

Mathematical Modeling of Cutting Forces in Micro-Drilling

Puneet Tandon, Sanjay G. Dhande, Shiv Gopal Kapoor, 2012 .

The effects of end mill alignment errors on vibrations at high spindle speeds

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2004 .

DYNAMIC MODELING AND ANALYSIS OF THE BORING MACHINING SYSTEM.

G. M. Zhang, Shiv Gopal Kapoor, 1985 .

A Model for the Prediction of Surface Flatness in Face Milling

Shreyes N. Melkote, Richard E. DeVor, Shiv Gopal Kapoor, 1997 .

Generalized groove-type chip breaker effects on drilling for different drill diameters and flute shapes

Richard E. DeVor, Shiv Gopal Kapoor, Jeff A. Degenhardt, 2005 .

An Evaluation of Ploughing Models for Orthogonal Machining

Richard E. DeVor, Shiv Gopal Kapoor, Daniel J. Waldorf, 1999 .

A mechanistic model-based force-feedback scheme for voice-coil actuated radial contour turning

Zongxuan Sun, Rohit G. Reddy, Richard E. DeVor, 2001 .

The Effects of Variable Speed Cutting on Vibration Control in Face Milling

Shih-Chieh Lin, Richard E. DeVor, Shiv Gopal Kapoor, 1990 .

Dynamic simulation of mobile robot navigation in warehousing environments

Shiv Gopal Kapoor, S. R. Menon, Ram Pandit, 1991 .

Automatic recognition of tool wear on a face mill using a mechanistic modeling approach

Richard E. DeVor, Shiv Gopal Kapoor, Daniel J. Waldorf, 1992 .

Development of meso-scale machine tool (mMT) systems

Kornel Ehmann, Xinyu Liu, Richard E. DeVor, 2002 .

Modeling Forces Including Elastic Recovery for Internal Thread Forming

Richard E. DeVor, Shiv Gopal Kapoor, Sameer Chowdhary, 2003 .

A Mechanistic Force Model for Contour Turning

Rohit G. Reddy, Richard E. DeVor, Shiv Gopal Kapoor, 1998, Manufacturing Science and Engineering.

Microstructure-Level Model for the Prediction of Tool Failure in WC-Co Cutting Tool Materials

Richard E. DeVor, Shiv Gopal Kapoor, Sunghyuk Park, 2006 .

Calibration of palletized workpiece systems for microfactories

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2008 .

Modeling of Forces for Drills With Chip-Breaking Grooves

Richard E. DeVor, Shiv Gopal Kapoor, Sushanta K. Sahu, 2004 .

An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures With Complex Dynamics, Part 2: Physical Explanation

Richard E. DeVor, Shiv Gopal Kapoor, R. Radulescu, 1997 .

Journal of Manufacturing Science and Engineering, Transactions of the ASME: Editorial

Shiv Gopal Kapoor, 2002 .

Database Development for Comparative Analysis of the Performance of Metalworking Fluids Based on Drilling Operations

Richard E. DeVor, Shiv Gopal Kapoor, Seounghyun Ham, 2011 .

The effects of process faults and misalignments on the cutting force system and hole quality in reaming

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Monitoring and Diagnosis of Multistage Manufacturing Processes Using Hierarchical Bayesian Networks

Shiv Gopal Kapoor, Patrick N. Bless, Partha Protim Mondal, 2021, Procedia Manufacturing.

Modeling and Forecasting Sales Data by Time Series Analysis

Shiv Gopal Kapoor, S. Wu, S. Kapoor, 1981 .

EFFECT OF VARIABLE CHIP LOAD ON MACHINING PERFORMANCE IN FACE MILLING.

Richard E. DeVor, Shiv Gopal Kapoor, H. J. Fu, 1983 .

Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 2002 .

Effect of water phase surface tension and viscosity on metalworking fluid functionality

Richard E. DeVor, Shiv Gopal Kapoor, Nandakishore Rajagopalan, 2006 .

Characterization of coated abrasive wear by statistical invariants.

Shiv Gopal Kapoor, S. Wu, S. Kapoor, 1978 .

Predicting printability of gravure and embossed papers by time series analysis

Shiv Gopal Kapoor, S. M. Wu, 1979 .

Dual-mechanism approach to the prediction of machining forces: Part 1 - model development and calibration

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1993 .

MODEL FOR END MILLED SURFACE TOPOGRAPHY.

John W. Sutherland, Shiv Gopal Kapoor, J. M. Lee, 1985 .

Microstructure-Level Modeling of Ductile Iron Machining

Richard E. DeVor, Shiv Gopal Kapoor, L. Chuzhoy, 2001, Manufacturing Engineering.

Development of a Novel Metalworking Fluid Engineered for Use With Microfiltration Recycling

Richard E. DeVor, Shiv Gopal Kapoor, Nandakishore Rajagopalan, 2006 .

Experimental investigation of the effect of drill coatings on hole quality under dry and wet drilling conditions

Richard E. DeVor, Shiv Gopal Kapoor, Shiva Kalidas, 2001 .

Chatter Stability Analysis of the Variable Speed Face-Milling Process

Geir E. Dullerud, Richard E. DeVor, Shiv Gopal Kapoor, 2001 .

Mechanistic Cutting Process Calibration via Microstructure-Level Finite Element Simulation Model

Richard E. DeVor, Shiv Gopal Kapoor, Sunghyuk Park, 2004 .

Modeling of Melt-Pool Formation and Material Removal in Micro-Electrodischarge Machining

Shiv Gopal Kapoor, David N Ruzic, Davide Curreli, 2015 .

An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting

Shiv Gopal Kapoor, S. Kapoor, R. Radulescu, 1994 .

Machining Simulation of Ductile Iron and Its Constituents, Part 2: Numerical Simulation and Experimental Validation of Machining

Richard E. DeVor, Shiv Gopal Kapoor, L. Chuzhoy, 2001 .

A Model of Micro Electro-Discharge Machining Plasma Discharge in Deionized Water

Shiv Gopal Kapoor, David N Ruzic, Davide Curreli, 2014 .

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

Richard E. DeVor, Shiv Gopal Kapoor, Johnson Samuel, 2012 .

Experimentation on the Residual Stresses Generated by Endmilling

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2001 .

Mathematical modeling of cutting forces in microdrilling

Puneet Tandon, Sanjay G. Dhande, Shiv Gopal Kapoor, 2013 .

Quasistatic Error Modeling and Model Testing for a 5-Axis Machine

Placid Mathew Ferreira, Shiv Gopal Kapoor, Robert G. Landers, 2017 .

Compensation of progressive radial run-out in face-milling by spindle speed variation

Richard E. DeVor, Shiv Gopal Kapoor, Sridhar Sastry, 2000 .

Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 1: Experimental Investigation of Flux Decline

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2000 .

Improving the performance of milling of titanium alloys using the atomization-based cutting fluid application system

Shiv Gopal Kapoor, S. Kapoor, S. Ganguli, 2016 .

Influence of Thermal Effects on Hole Quality in Dry Drilling, Part 1: A Thermal Model of Workpiece Temperatures

Richard E. DeVor, Shiv Gopal Kapoor, Shiva Kalidas, 2002 .

Characterization of plasma in micro-EDM discharge using optical spectroscopy

Richard E. DeVor, Shiv Gopal Kapoor, Nagahanumaiah, 2009 .

Finite element-based study of the mechanics of microgroove cutting

Richard E. DeVor, Shiv Gopal Kapoor, Keith A. Bourne, 2013 .

Part warpage model based on machining-induced residual stress

Richard E. DeVor, Shiv Gopal Kapoor, J. Kurt Jacobus, 1999 .

Model of Biomass Concentration in Membrane Filtration Recycling Systems Subject to Single Substrate-Limited Growth Kinetics

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2000, Manufacturing Engineering.

Microfiltration of Polyoxyalkylene Metalworking Fluid Lubricant Additives Using Aluminum Oxide Membranes

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2001 .

An Experimental Investigation of the Crack Growth Phenomenon for Drilling of Fiber-Reinforced Composite Materials

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 1996 .

MECHANISTIC MODEL FOR THE PREDICTION OF THE FORCE SYSTEM IN FACE MILLING OPERATIONS.

Richard E. DeVor, Shiv Gopal Kapoor, Richard E. DeVor, 1984 .

On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2004 .

An Enhanced Microstructure-Level Finite Element Machining Model for Carbon Nanotube-Polymer Composites

Shiv Gopal Kapoor, Johnson Samuel, Chandra Nath, 2015 .

Experimental investigation of machinability and tool wear in micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

An Analytical Model for the Prediction of Minimum Chip Thickness in Micromachining

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 2006 .

Force Modeling of Five-Axis Microball-End Milling

Shiv Gopal Kapoor, James Zhu, S. Kapoor, 2015 .

A new approach to stability analysis of variable speed machining systems

Tsu-Chin Tsao, Shiv Gopal Kapoor, T. Tsao, 1993 .

Predictive model for the full biaxial surface and subsurface residual stress profiles from turning

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2001 .

Development of a unique topology for a hard-turning micro-scale machine tool

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Adair, 2011 .

On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2004 .

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Richard E. DeVor, Shiv Gopal Kapoor, Anil K. Srivastava, 2012 .

An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials

Richard E. DeVor, Shiv Gopal Kapoor, V. Surla, 2011 .

Development of an automated microfactory

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

A stochastic approach to paper surface characterisation and printability criteria

Shiv Gopal Kapoor, S. M. Wu, 1978 .

STABILITY ANALYSIS OF THE BORING PROCESS SYSTEM.

Shiv Gopal Kapoor, L. L. Bahney, S. Kapoor, 1984 .

Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 2: Analysis of Underlying Mechanisms

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2000 .

Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2007 .

Experimental investigation of membrane fouling due to microfiltration of semi-synthetic metalworking fluids

Richard E. DeVor, Shiv Gopal Kapoor, Nandakishore Rajagopalan, 2005 .

Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation

Richard E. DeVor, Shiv Gopal Kapoor, Armand Joseph Beaudoin, 2001 .