Yuka Takai

发表

Eye Movement Differences Between Novices and Expert Surgeons in Laparoscopic Surgery Simulator

Hiroyuki Hamada, Yuki Miyamoto, Hiroyuki Ohta, 2017, HCI.

Analysis on the Three-Dimensional Wire Orientation of ‘Kana-Ami’ Metal Network Between Expert and Non-Expert

Yuka Takai, Akihiko Goto, Wang Zelong, 2014 .

Comparison of Different Tea Whisk Influence on Bubble Form in Processes of "The Way of Tea"

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2014, HCI.

A Comparison of Processing Time and Strike Position Between Experts and Non-experts of Sheet-Metal Repair

Hiroyuki Hamada, Yuka Takai, Shigeru Ikemoto, 2016, HCI.

513 Comparison between Expert and Non-expert in Compressive Pressure of Sharpening a Kitchen Knife

Akira, Yuka Takai, Akihiko Goto, 2012 .

Experience Factors Influence on Motion Technique of "The Way of Tea" by Motion Analysis

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2015, HCI.

717 Manufacturing Process of Kyoto Soft-pastels and Color Characteristics

Yuka Takai, Akihiko Goto, Kayo Yokota, 2013 .

Influence of Engineer Movement for Auto Repair Painting on Finished Surfaces

Yuka Takai, Hiroyuki Hamada, Shigeru Ikemoto, 2016 .

The Technical Effect of Using Kumihimo Disk to Make Braids, Compared to Using Marudai

Yuka Takai, Akihiko Goto, Akiko Kimura, 2018, Advances in Manufacturing, Production Management and Process Control.

Motion Analysis of the Tea Whisk Concerning the Way of Tea

Hiroyuki Hamada, Tomoko Ota, Yuka Takai, 2017, HCI.

503 Study of "Hone-tame" process in Kyo-chochin production process

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2011 .

Learning System on Surgical Technique of Laparoscopic Cholecystectomy

Hiroyuki Hamada, Hisanori Shiomi, Kazuaki Yamashiro, 2016 .

515 Construction of Database Based on Usage and Shape of Kyoto style Japanese lantern

Yuka Takai, Akihiko Goto, Mamoru Kojima, 2012 .

Impact of Operator Experience on Spray Gun Handling for Automobile Repair

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2015 .

Study on Preference of Shuso Japanese Paper

Yuka Takai, Akihiko Goto, Hongguang Hu, 2014 .

An Investigation on the Relationship Between Operator’s Skill Level and Dimension Stability in Gel Coating

Yuka Takai, Akihiko Goto, Yuqiu Yang, 2014 .

The Analysis of Polishing Process of Cold Forging Die in Axial Symmetric Form and Axial Non-symmetric Form

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2016, HCI.

Human motion of weaving “Kana-ami” technique by biomechanical analysis

Tomoko Ota, Yuka Takai, Ken-ichi Tsuji, 2012 .

Study of Caregivers' Skills for Monitoring Senior Residents

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2015, HCI.

Characteristics of Expert's Motion on Second Lining Process at Conservation of National Treasures

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2017 .

521 Effect of Trowel on Flow characteristics of Kyo-wall compound II : Understanding of Secret of Kyo-wall Arsen

Hiroyuki Sato, Hiroyuki Hamada, Yuka Takai, 2012 .

Activity Process Analysis in Automobile Sheet Metal Dent Repair

Yuka Takai, Shigeru Ikemoto, 2020 .

Influence at years of experience on operation concerning Kyoto style earthen wall

Hiroyuki Sato, Hiroyuki Hamada, Yuka Takai, 2012 .

Comparative Study on the Feature of Kitchen Knife Sharpening Skill between Expert and Non-Expert

Zelong Wang, Akira, Yuka Takai, 2014, HCI.

Numerical Analysis on "Kana-Ami" Structure Between Expert and Non-expert

Zelong Wang, Hiroyuki Hamada, Yuka Takai, 2015, HCI.

Burdened 3D analysis and Jerk of care receiver in transfer assistance movement

Kai Mao, Yuka Takai, Akihiko Goto, 2017 .

505 Research of Adhesive Effect of Traditional Technique and Material on Second Lining Procedure of Assembling a Hanging Scroll

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2015 .

An Investigation of Caregiver's Fatigue During Nursing Work in China

Takashi Yoshikawa, Hiroyuki Hamada, Tomoko Ota, 2015, HCI.

Motion Analysis of Second Lining Process Contributing to the Acquirement of Technique Making

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2016 .

Investigation of Efficient Hammering Procedure on Sheet Metal Repair

Yuka Takai, Shigeru Ikemoto, Hiroyuki Hamada, 2016 .

Light Transmission Properties of Insert Molded GFRPs with Different Crape Structure of Silk Fabrics

Kiyoshi Fujiwara, Atsushi Endo, Yuka Takai, 2015, HCI.

Motion Analysis of the Pounding Technique Used for the Second Lining in the Fabrication of Traditional Japanese Hanging Scrolls

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2014, HCI.

Electromyography Measurement of Workers at the Second Lining Pounding Process for Hanging Scrolls

Hisanori Yuminaga, Yuka Takai, Akihiko Goto, 2015, HCI.

Research on Senior Response to Transfer Assistance between Wheelchair and Bed - EEG Analysis

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2014, HCI.

The Analysis of Repeatability of Polishing Work Motion for a Cold Forging Die with Simple Axial Symmetric Form

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2017 .

Evaluation Approach for Measuring the Skill Transfer Level in the Forging Die Polishing

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2015 .

Features of hexagonal pattern on metal wire network structure made by experts and non-experts with different lengths of work experience

Zelong Wang, Yuka Takai, Akihiko Goto, 2013 .

Evaluation of Japanese Metal Wire Network “Kana-ami” Based on Three-dimensional Analysis☆

Zelong Wang, Yuka Takai, Akihiko Goto, 2015 .

A Pilot Study Investigating the Impact of Indoor Wall Construction on Performance during Long Monotonous Work

Noriaki Kuwahara, Hiroyuki Hamada, Yuka Takai, 2013 .

Investigation of “Bento” Culture in Focusing on the Order of Feeding Actions☆

Hiroyuki Nishimoto, Yuka Takai, Akihiko Goto, 2015 .

Evaluation of Kyo-Yuzen-Zome Fabrics with Different Pastes

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2014, HCI.

Characteristics of Expert in Checking Phase During Partial Painting in Automobile Repair

Yuka Takai, Shigeru Ikemoto, 2019 .

The Load Measurement of the Beating Brush in the Second Lining Procedure

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2016, HCI.

Comparison of Different Preparation Processes and Final Surface Finishes of Metallographic Specimens

Atsushi Endo, Takuya Sugimoto, Yuka Takai, 2013 .

516 Elucidation of Making Process of Expert in Manual Sheet Metal Working for Making Automobile Parts

Yuka Takai, Akihiko Goto, Shigeru Ikemoto, 2012 .

Colorimetry and Impression Evaluation of Insert Molded GFRP Plate with Black Silk Fabrics

Kiyoshi Fujiwara, Takahiro Suzuki, Atsushi Endo, 2015, HCI.

An Investigation on Skillful Gel-Coat Techniques and its Application to Beginner's Application

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2015, HCI.

Analysis of ‘Kana-Ami’ Structure Between Expert and Non-Expert by Using X-Ray Computed Tomography (CT)

Yuka Takai, Akihiko Goto, Wang Zelong, 2015 .

Researching Sounds Generated During the Second Lining Pounding Process

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2015, HCI.

Effects of Spray Gun Handling of Automobile Repair on Carrier of Car Mechanic

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2015, HCI.

Comparison of Characteristics Recognition in the "Mitate" of Urushi Crafts

Hiroyuki Hamada, Atsushi Endo, Yutaro Shimode, 2014, HCI.

Relationship between Kansei Evaluation and Pricing Decision to Kyo-Yuzen-Zome with Different Pastes

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2014 .

Process Analysis of Kyo Karakami Manufacturing

Yuka Takai, Mitsunori Suda, Erika Suzuki, 2015, HCI.

Motion analysis of the way of tea

Tomoko Ota, Yuka Takai, Akihiko Goto, 2016 .

The Classification Tendency and Common Denomination of the Points Paid Attention in Ikebana Instruction

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2014, HCI.

Movement Analysis of Transfer Assistance Using a Slide Board

Hiroyuki Hamada, Yuki Miyamoto, Tomoko Ota, 2016 .

Motion Analysis of Weaving “Kana-ami” Technique With Different Years of Experience

Hiroyuki Hamada, Tomoko Ohta, Gen Sasaki, 2012 .

Retraction:Characteristics of Expert's Painting Motion in Auto Repair Painting Process using Solid Color Paint

Hiroyuki Hamada, Yuka Takai, Hiroyuki Hamada, 2016 .

511 Motion analysis of the way of tea process by high-speed camera

Tomoko Ota, Yuka Takai, Akihiko Goto, 2015 .

The Analysis of Removal Efficiency of Polishing Work Motion for Cold Forging Die with Simple Axial Symmetric Form

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2017 .

518 3D Motion Analysis in Continuous Fabrication of Wire Net

Yuka Takai, Akihiko Goto, Ken-ichi Tsuji, 2012 .

718 Research on hexagon angles' characteristic of "Kana-ami" between expert and non-expert

Zelong Wang, Atsushi Endo, Yuka Takai, 2013 .

Educational Effects by Formalizing of Traditional Backing Techniques in Japan

Yuka Takai, Akihiko Goto, Oka Iwataro, 2020 .

S0450204 Characteristics of Posture of Experts in Auto Repair Painting Process

Hiroyuki Hamada, Yuka Takai, Shigeru Ikemoto, 2015 .

512 Characteristics of Spray Gun Handling of Skilled Car Mechanic on Automobile Repair

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2015 .

Mechanical Properties of Jute Composite by Spray up Fabrication Method

Yuka Takai, Akihiko Goto, Hiroyuki Hamada, 2014 .

The Common Factor of Hammering Movement by Experienced Engineer in Sheet-metal Repair

Yuka Takai, Shigeru Ikemoto, 2017 .

Effects of Quantified Instructional Tool on Spray-up Fabrication Method

Yiyi Zhang, Hiroyuki Hamada, Yuka Takai, 2015, HCI.

714 Optimization approach for operation process in the forging die polishing

Hiroyuki Hamada, Hiroyuki Nishimoto, Yuka Takai, 2015 .

Influence of Proficiency on Eye Movement of the Surgeon for Laparoscopic Cholecystectomy

Hiroyuki Hamada, Hisanori Shiomi, Tomoko Ota, 2015, HCI.

Motion Analysis of Interval Time During "Kana-ami" Making Process

Zelong Wang, Hiroyuki Hamada, Yuka Takai, 2015, HCI.

S0450201 Three-dimensional structure analysis of "Kana-ami" between expert and non-expert

Zelong Wang, Yuka Takai, Akihiko Goto, 2015 .

S0450202 Comparison of eye movement during the grinding and ground surface finish between expert and non-expert

Yuka Takai, Akihiko Goto, Takuya Sugimoto, 2015 .

Characteristic of Motion by Experienced Engineer in Sheet Metal Repair

Yuka Takai, Hiroyuki Hamada, Shigeru Ikemoto, 2016 .

Study on Method of Observing Maki-e Crafts Work in Urushi Craftspeople

Hiroyuki Hamada, Atsushi Endo, Yutaro Shimode, 2015, HCI.

Expert’s Common Factor of Painting Motion in Auto Repair Painting Process

Yuka Takai, Hiroyuki Hamada, Shigeru Ikemoto, 2016 .

715 Process Analysis of Japanese Knives Sharpening between Expert and Non-expert

Akira, Tomoko Ota, Yuka Takai, 2015 .

S0450203 Effect of Career of Sheet-metal Repair for Car on Tools Usage

Hiroyuki Hamada, Yuka Takai, Shigeru Ikemoto, 2015 .

Analysis of technique of the expert in lining procedure

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2019 .

734 Motion Analysis of Expert of the Backing Process of Scrolls

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2013 .

Research on the Performance of Three Tea Whisks of "The Way of Tea" with Different Experience

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2015, HCI.

Skill Level Differences of Urushi Craftspeople in Urushi Products

Hiroyuki Hamada, Yutaro Shimode, Yuka Takai, 2012 .

Creation and Usability Evaluating of E-Learning Contents for Automobile Repair Block Painting

Noriaki Kuwahara, Hiroyuki Hamada, Yuka Takai, 2017 .

Visual Evaluation of "The Way of Tea" Based on Questionnaire Survey Between Chinese and Japanese

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2015, HCI.

An Investigation on Conversion from Tacit Knowledge to Explicit Knowledge in Hand Lay-Up Fabrication Method

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2015, HCI.

Research on the Motion Technique of Japanese Tea Ceremony

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2016, HCI.

Brain Activity Analysis on "Kana-Ami" Making Process

Zelong Wang, Hiroyuki Hamada, Yuka Takai, 2015, HCI.

Comparison of Eye Movement During the Polishing Process of Metallographic Sample Between Expert and Nonexpert

Hiroyuki Nishimoto, Takuya Sugimoto, Yuka Takai, 2015, HCI.

Evaluation of Kimono Clothes in Kyo-Yuzen-Zome using Image

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2015, HCI.

Investigation of Decision Process for Purchasing Foodstuff in the “Bento” Lunch Box☆

Hiroyuki Nishimoto, Yuka Takai, Akihiko Goto, 2015 .

722 Judge of beauty about Future Applied Conventional Technology Engineering : In case of Ikebana

Noriaki Kuwahara, Hiroyuki Hamada, Yuka Takai, 2013 .

Awareness and Problem Solving of Young Craftspeople Concerning Wire Net Working

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2019 .

Analysis of Eye Movement of Caregiver Concerning on Transfer Operation

Takashi Yoshikawa, Hiroyuki Hamada, Yuka Takai, 2015, HCI.

Movement Analysis about “Adjusting Care-receiver’s Position” of Transfer Assistance Using a Slide Board

Yuki Miyamoto, Yuka Takai, Akihiko Goto, 2016 .

Motion Analysis on Papermaking Work of Honminoshi

Yuka Takai, Akihiko Goto, Yasuhiro Oka, 2019 .

Comparative Analysis of Wheelchair Transfer Movements Between Nurse and Care Worker

Yasuko Kitajima, Kazuaki Yamashiro, Yuka Takai, 2017, HCI.

Investigation of the tasteful "Sabi" phenomenon of the aged Kyoto wall:The study for development of engineering factor hidden in a traditional technology

Hiroyuki Sato, Yuka Takai, Akihiko Goto, 2014 .

Biomechanics Investigation of Skillful Technician in Spray-up Fabrication Method - Converting Tacit Knowledge to Explicit Knowledge in the Fiber Reinforced Plastics Molding

Hiroyuki Hamada, Yuka Takai, Akihiko Goto, 2014, HCI.

2D6-4 Behavioral Analysis on Making Process of The Way of Tea Between Expert and Non-Expert

Zelong Wang, Hiroyuki Hamada, Tomoko Ota, 2014 .

Effect of Wall Material of a Room on Performance in Long Monotonous Work

Noriaki Kuwahara, Atsushi Endo, Yuka Takai, 2014, HCI.

Developing a System to Assess the Skills of Japanese Way of Tea by Analysing the Forming Sound

Hiroyuki Hamada, Tomoko Ota, Yuka Takai, 2013 .

Process analysis of hammering in auto body repair

Noriaki Kuwahara, Hiroyuki Hamada, Yuka Takai, 2018 .

S0450205 The investigation of Traditional Japanese Trowel (Part 2) : Surface Structure Comparison between and Expert and a Non-expert

Hiroyuki Hamada, Porakoch Sirisuwan, Takuya Sugimoto, 2015 .

Interval Timing Analysis of Behavior Patterns on “Kana-Ami” Making Process

Zelong Wang, Yuka Takai, Akihiko Goto, 2016 .

Movement Analysis of Transfer Assistance Using a Slide Board

Zelong Wang, Takashi Yoshikawa, Hiroyuki Hamada, 2016, HCI.

Application of E-learning System Reality in Kyoto-style Earthen Wall Training

Hiroyuki Sato, Zelong Wang, Yuka Takai, 2014, HCI.

Biomechanics Investigation of Skillful Technician in Hand Lay Up Fabrication Method

Atsushi Endo, Yuka Takai, Akihiko Goto, 2012 .

Subjective evaluation of Kyo-Yuzen-dyed fabrics with different material in putting-past (Nori-oki) process

Hiroyuki Hamada, Atsushi Endo, Yuka Takai, 2012 .

Motion Analysis at Checking Phase in Automobile Repair Painting

Yuka Takai, Shigeru Ikemoto, 2021, AHFE.

Relationships between degree of skill, dimension stability and mechanical properties of composite structure in hand lay-up fabrication method

Yuka Takai, Akihiko Goto, Hiroyuki Hamada, 2014 .

Mechanical Property of CFRP by Carbon Spray Up Method

Akio Ohtani, Yuka Takai, Akihiko Goto, 2013 .

Eye Motion Analysis of Kyoto Japanese Lantern Craftsmen during the Kami-hari Process

Yuka Takai, Akihiko Goto, Hiroyuki Hamada, 2013 .

411 Relationship of the Time Distribution and the Punching Position of Sheet-metal Repair

Yuka Takai, Hiroyuki Hamada, Shigeru Ikemoto, 2016 .

Difference between Inexperienced Persons and Experts of Ikebana through Impression Evaluation

Noriaki Kuwahara, Yuka Takai, Akihiko Goto, 2014 .