K. Kawano

发表

Technology development for the construction of the ITER superconducting magnet system

Kiyoshi Okuno, Hideo Nakajima, Masayoshi Sugimoto, 2007 .

Experimental results of ITER cold circulators towards the performance demonstration

Takaaki Isono, K. Kawano, R. Bhattacharya, 2017 .

Technology development and mass production of Nb3Sn conductors for ITER toroidal field coils in Japan

Arnaud Devred, Kiyoshi Okuno, Takaaki Isono, 2011 .

Test of the ITER TF insert and Central Solenoid Model Coil

E. Zapretilina, Joseph V. Minervini, Neil Mitchell, 2003 .

"Numerical Modeling of Reconfigurable RF MEMS-based Structures Involving the Combination of Electrical and Mechanical Force"

K. Kawano, Shafrida Sahrani, 2006 .

DEVELOPMENT OF A LARGE CENTRIFUGAL CRYOGENIC PUMP

K. Kawano, Nobuyoshi Saji, Hirokazu Tsuji, 1992 .

Preparation for the ITER Central Solenoid Conductor Manufacturing

Y. Nunoya, K. Kawano, P. Libeyre, 2012, IEEE Transactions on Applied Superconductivity.

DEVELOPMENT OF JACKETING TECHNOLOGIES FOR ITER CS AND TF CONDUCTOR

Kiyoshi Okuno, K. Kawano, Kunihiro Matsui, 2008 .

Cryogenic system development and helium behavior study for forced-flow superconducting coils

Takashi Kato, Kiyoshi Okuno, Masataka Nishi, 1985 .

Recent progress in the demo poloidal coil program

Takashi Kato, Kiyoshi Okuno, Masataka Nishi, 1989 .

A 16-T superconducting toroidal coil development for a tokamak fusion machine

Masataka Nishi, Yoshikazu Takahashi, T. Ando, 1986 .

First test results for the ITER central solenoid model coil

Takashi Kato, Nicolai Martovetsky, Makoto Takayasu, 2001 .

Design and fabrication of superconducting cables for ITER central solenoid model coil

Takashi Kato, Masataka Nishi, Takaaki Isono, 1996 .

Thermal design and verification tests of the Nb-Ti demo poloidal coils (DPC-U1, U2)

Masataka Nishi, Yoshikazu Takahashi, Hiroshi Tsuji, 1988 .

CRYOGENIC HELIUM PUMP SYSTEM FOR THE DEVELOPMENT OF SUPERCONDUCTING MAGNETS IN A FUSION EXPERIMENTAL REACTOR

Takashi Kato, Hirokazu Tsuji, K. Kawano, 1993 .

First qualification of ITER Toroidal Field Coil conductor jacketing

Kiyoshi Okuno, Yoshikazu Takahashi, Takaaki Isono, 2011 .

Test of the NbAl insert and ITER central solenoid model coil

Joseph V. Minervini, Neil Mitchell, Takashi Kato, 2003 .

Experimental results of pressure drop measurement in ITER CS model coil tests

Takashi Kato, Hirokazu Tsuji, Kiyoshi Okuno, 2002 .

Development of 46-kA Nb/sub 3/Sn conductor joint for ITER Model Coils

Y. Nunoya, T. Ando, K. Kawano, 2000, IEEE Transactions on Applied Superconductivity.

Fabrication and Test of a 60‐kA HTS Current Lead for Fusion Magnet System

Kiyoshi Okuno, Takaaki Isono, Masayuki Konno, 2004 .

Critical current measurements using 13-T split coils and 100-kA superconducting transformer (for FER)

Takashi Kato, Kiyoshi Okuno, Masataka Nishi, 1991 .

Construction of ITER common test facility for CS model coil

Takashi Kato, Masataka Nishi, Takaaki Isono, 1996 .

Cryogenic System for ITER CS Model Coil

Takashi Kato, Kiyoshi Okuno, Hiroshi Tsuji, 1996 .

Final design of a cryogenic system for the ITER CS model coil

Takashi Kato, Hirokazu Tsuji, K. Kawano, 1994 .

System Design and Verification Test Results of Cryogenic System for Demonstration Poloidal Coil

Takashi Kato, K. Kawano, Susumu Shimamoto, 1988 .

Demonstration of JK2LB Jacket Fabrication for ITER Central Solenoid

K. Kawano, F. Tsutsumi, K. Okuno, 2006, IEEE Transactions on Applied Superconductivity.

Demonstration of full scale JJ1 and 316LN fabrication for ITER TF coil structure

Kiyoshi Okuno, K. Kawano, F. Tsutsumi, 2007 .

Development of Structures for ITER Toroidal Field Coil in Japan

K. Kawano, N. Koizumi, Y. Chida, 2012, IEEE Transactions on Applied Superconductivity.