Harit K. Raval

发表

DEEP FORMING SIMULATION FOR DOUBLE GROOVE PULLEY OF AUTOMOTIVE APPLICATION

Mahesh Chudasama, Harit K. Raval, 2009 .

Investigations on Prediction of MRR and Surface Roughness on Electro Discharge Machine Using Regression Analysis and Artificial Neural Network Programming

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2008 .

Study on effect of process parameters on overcut and tool wear rate during micro-electro-discharge slotting process

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2016 .

An analysis of forces during three roller bending process

Harit K. Raval, Shakil A. Kagzi, 2015 .

Optimization of Process Parameters during Flow Forming Process and its Verification

Harit K. Raval, Ravi J. Bhatt, H. Raval, 2017 .

A Comparative Study of Force Prediction Models during Static Bending Stage for 3-Roller Cone Frustum Bending

Mahesh Chudasama, Harit K. Raval, 2016 .

Analytical Modeling of Top Roller Position for Multiple Pass (3-Roller) Cylindrical Forming of Plates

Harit K. Raval, A. H. Gandhi, 2006 .

Bendability Analysis for Bending of C-Mn Steel Plates on Heavy Duty 3-Roller Bending Machine

Harit K. Raval, Himanshu V. Gajjar, Anish H. Gandhi, 2007 .

In situ investigations on forces and power consumption during flow forming process

Harit K. Raval, Ravi J. Bhatt, H. Raval, 2018 .

Die-less Rapid Prototyping Process: Parametric Investigations☆

Keyur P. Desai, Harit K. Raval, Bhavin V. Desai, 2014 .

Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2015 .

Influence of Operating Variables During Flow Forming Process

Harit K. Raval, Ravi J. Bhatt, 2016 .

STUDIES ON TOOL WEAR CHARACTERISTICS IN MICRO ELECTRO DISCHARGE SLOTTING PROCESS (µ-EDS)

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2014 .

Analytical and empirical modeling of top roller position for three-roller cylindrical bending of plates and its experimental verification

Harit K. Raval, A. H. Gandhi, A. Gandhi, 2008 .

Development of Analytical Model for Dynamic Bending Force during Single Pass 3-roller Cone Frustum Bending Technique

Mahesh Chudasama, Harit K. Raval, 2014 .

Comparison of Analytical Models of Force Prediction during Dynamic Bending Stage for 3-Roller Conical Bending Process

Mahesh Chudasama, Harit K. Raval, 2014 .

Modelling of cutting forces as a function of cutting parameters in milling process using regression analysis and artificial neural network

Harshit K. Dave, Harit K. Raval, H. Dave, 2010 .

Development of Macro Program for Improving Machining Characteristics of Logarithmic Spiral on CNC Machining Center

Keyur P. Desai, Harit K. Raval, Shalin Marathe, 2021 .

Development of semi empirical model for predicting material removal rate during orbital electro discharge machining of Inconel 718

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2013 .

An approximate bending force prediction for 3-roller conical bending process

Mahesh Chudasama, Harit K. Raval, 2013 .

Mathematical Modelling and Finite Element Simulation of Pre-Bending Stage of Three-Roller Plate Bending Process

Harit K. Raval, Himanshu V. Gajjar, Anish H. Gandhi, 2008 .

Formulation of springback and machine setting parameters for multi-pass three-roller cone frustum bending with change of flexural modulus

Harit K. Raval, A. H. Gandhi, Ateeque Shaikh, 2009 .

Bending force prediction for dynamic roll-bending during 3-roller conical bending process

Mahesh Chudasama, Harit K. Raval, 2014 .