Mahmudur Rahman

发表

Modeling of Common Rail Fuel Injection System of Four Cylinder Hydrogen Fueled Engine

Rosli Abu Bakar, Mohammed Kamil, Mahmudur Rahman, 2016 .

Statistical Analysis and Optimum Performance of the Gas Turbine Power Plant

Firdaus Basrawi, Mahmudur Rahman, Thamir K. Ibrahim, 2016 .

A study on the machining of high-aspect ratio micro-structures using micro-EDM

Mahmudur Rahman, H. S. Lim, Y. S. Wong, 2003 .

Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach

Ahmad Kamal Ariffin Mohd Ihsan, Md. Abdul Maleque, Mahmudur Rahman, 2009 .

Ultra-precision machining of radial Fresnel lens on roller moulds

Kui Liu, A. Senthil Kumar, Mahmudur Rahman, 2015 .

Micro‐Electro Discharge Machining (µEDM)

Mahmudur Rahman, Mahmudur Rahman, Muhammad P. Jahan, 2011 .

Optimisation of multi-pass milling using genetic algorithm and genetic simulated annealing

Mahmudur Rahman, Yoke San Wong, Z. G. Wang, 2004 .

Non-conventional Materials for Machine Tool Structures

Mahmudur Rahman, Abul Mansur, Bazlul Karim, 2001 .

Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach

Mahmudur Rahman, Mohd Shahrir Mohd Sani, M. M. Noor, 2009 .

Optimized Aggregate Gradation for Bangladesh

Mahmudur Rahman Fatmi, Mahmudur Rahman, Munaz Ahmed Noor, 2011 .

Evaluation of a lathe with ferrocement bed

Mahmudur Rahman, K. H. Chua, M. A. Mansur, 1993 .

Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces

Geok Soon Hong, Mahmudur Rahman, Deping Yu, 2012 .

In-Process Monitoring System for Machining Environment Based on Heat Flux Sensing.

Hidenori Shinno, Mahmudur Rahman, Chikao Inaba, 1992 .

Identification of Dynamics Modal Parameter for Car Chassis

Mahmudur Rahman, Kumaran Kadirgama, M. M. Noor, 2011, MSE 2011.

A Novel Method for Profile Error Analysis of Freeform Surfaces in FTS/STS Diamond Turning

A. Senthil Kumar, Mahmudur Rahman, Wee Keong Neo, 2014 .

Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach.

Rosli Abu Bakar, Mahmudur Rahman, M. M. Noor, 2008 .

Development and evaluation of an on-machine optical measurement device

Yoke San Wong, Mahmudur Rahman, Seong-Min Son, 2007 .

A fine tool servo system for global position error compensation for a miniature ultra-precision lathe

Mahmudur Rahman, Frank Watt, Gan Sze-Wei, 2007 .

Knowledge based expert system application for automative piston material selection

Mahmudur Rahman, Md. Abdul Maleque, A. K. H. A. Ma Arifutzzaman, 2010 .

Greenhouse gas emissions from recovery of various North American conventional crudes

Mahmudur Rahman, Christina E. Canter, Amit Kumar, 2014 .

Advances in manufacturing and materials engineering

A. N. Mustafizul Karim, Erry Yulian Triblas Adesta, Md. Abdul Maleque, 2012 .

Novel Machining Technique for Surface Patterning by Diamond

A. Senthil Kumar, Mahmudur Rahman, Rui Huang, 2013 .

Multidimensional Computational Modeling of Direct Injection for Hydrogen Fueled Engine

Mahmudur Rahman, Khalaf I. Hamada, A. Rashid A. Aziz, 2012 .

Design of a Fast Tool Servo Based Diamond Turning Machine for Fabricating Micro-Structured Surfaces

Geok Soon Hong, Mahmudur Rahman, Deping Yu, 2010 .

A Study on Surface Generation along Nominal Cutting Direction in Elliptical Vibration Cutting

A. Senthil Kumar, Mahmudur Rahman, Xinquan Zhang, 2011 .

Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back

Mahmudur Rahman, Tanveer Saleh, Indraneel Bishwas, 2010 .

Factors affecting the machining accuracy of a chucked workpiece

Mahmudur Rahman, 1986 .

Profile evaluation of radial Fresnel lens directly machined on roller molds by rotating-tool diamond turning

Kui Liu, A. Senthil Kumar, Mahmudur Rahman, 2017 .

Effect of machining parameters in ultrasonic vibration cutting

Mahmudur Rahman, Chandra Nath, M. Rahman, 2008 .

Tool-based micro-machining

Mahmudur Rahman, Yoke San Wong, Takeshi Masaki, 2007 .

A novel method for layered tool path generation in the fast tool servo diamond turning of noncircular microstructural surfaces

Mahmudur Rahman, A. Senthil Kumar, Neo W Keong, 2013 .

An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle

Mahmudur Rahman, Khalaf I. Hamada, K. Hamada, 2014 .

A tandem approach to selection of machinability data

Mahmudur Rahman, Y. S. Wong, S. H. Yeo, 1995 .

Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach

M. Kamal, Mahmudur Rahman, Kumaran Kadirgama, 2012 .

Profile error compensation in high precision 3D micro-EDM milling

Mahmudur Rahman, Yoke San Wong, Minh Dang Nguyen, 2013 .

FEA BASED DURABILITY USING STRAIN-LIFE MODELS FOR DIFFERENT MEDIUM CARBON STEEL AS FABRICATION MATERIALS FOR AN AUTOMOTIVE COMPONENT

Mahmudur Rahman, S. M. Beden, Ahmad Kamal Ariffin, 1970 .

High-Speed Machining

Mahmudur Rahman, Z. Wang, Z. Wang, 2014 .

Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review

Mahmudur Rahman, Ahmad Razlan Yusoff, M. S. Najiha, 2016 .

A novel surface analytical model for cutting linearization error in fast tool/slow slide servo diamond turning

Mahmudur Rahman, Dennis Wee Keong Neo, A. Senthil Kumar, 2014 .

Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling

Mahmudur Rahman, A. Senthil Kumar, M. U Salam, 2002 .

A COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF SINGLE AND THREE NOZZLES MINIMUM QUANTITY LUBRICANT FLOW FOR MILLING

Mahmudur Rahman, M. S. Najiha, Md. Mustafizur Rahman, 2014 .