Anton Panda

发表

Tapered Roller Bearing and Comprehensive Durability Identification of Ceramic Cutting Materials in Machining Process of Steel 80MoCrV4016

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

Analysis of Cutting Zone Machinability during the Drilling of XCr18Ni8 Stainless Steel

Anton Panda, Jozef Jurko, Marcel Behún, 2012 .

Dependence of Pressure Die Casting Quality on Die Casting Plunger Velocity Inside a Filling Chamber of a Pressure Die Casting Machine

Anton Panda, Jozef Jurko, Stefan Gaspar, 2012 .

Evaluation of Vibration Parameters under Machining

Anton Panda, Jozef Jurko, Tibor Krenický, 2015 .

Study on Screw Drill Wear When Drilling a New ELC Stainless Steels and Accompanying Phenomena in the Cutting Zone

Anton Panda, Jozef Jurko, Mário Gajdoš, 2013 .

Bearing Rings Turning and the Impact of this Process for Resulting Durability of Selected Cutting Materials Durability

Ján Duplák, Anton Panda, Miroslav Kormoš, 2015 .

Study of the Tool Life and the Tool Wear Mechanisms in the Production of Holes in Stainless Steel

Anton Panda, Jozef Jurko, 2013 .

CONSIDERING THE STRENGTH ASPECTS OF THE MATERIAL SELECTION FOR THE PRODUCTION OF PLASTIC COMPONENTS USING THE FDM METHOD

Anton Panda, Ludmila Novakova-Marcincinova, Tadeusz Zaborowski, 2018 .

Study of Changes the Tool Wear of the Cutting Tool Part of Stainless Steels ELC X04Cr18Ni9Ti during Drilling

Anton Panda, Jozef Jurko, 2013 .

Verification of Surface Finish as an Indicator of Machinability in Drilling of Stainless Steel by DIN 1.4301

Anton Panda, Jozef Jurko, A. Panda, 2012 .

Helical Drills Wear during Drilling of a New ELC Austenitic Stainless Steels

Anton Panda, Jozef Jurko, Marcel Behún, 2012 .

Study of the Surface Material AISI 304 Usable for Actuator after the Process of Turning

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

Evaluation of the Tool Wear the Screw Drill during the Drilling of Stainless Steels DIN 1.4301

Anton Panda, Jozef Jurko, A. Panda, 2014 .

Prediction of a New Form of the Cutting Tool According to Achieve the Desired Surface Quality

Anton Panda, Jozef Jurko, Marcel Behún, 2012 .

Vibration and Experimental Comparison of Machining Process

Anton Panda, Jozef Jurko, Iveta Pandová, 2015 .

Theory and Practice in the Process of T-vc Dependence Creation for Selected Cutting Material

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

Effect of Machinability of Stainless Steels for Increasing of Productivity Production

Anton Panda, Jozef Jurko, Marcel Behún, 2013 .

Turning Bearing Rings and Determination of Selected Cutting Materials Durability

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

Evaluation of the Surface Roughnes the Machined Surface of Holes during the Drilling of Stainless Steels DIN 1.4301

Anton Panda, Jozef Jurko, A. Panda, 2014 .

Change of Material Deformation under the Machined Surface when Drilling Steel C45 and DIN 1.4301

Anton Panda, Jozef Jurko, 2013 .

Comparison and Analysis of the Flow Rate

Anton Panda, Marek Prislupčák, 2015 .

Analytical expression of T-vc dependence in standard ISO 3685 for sintered carbide

Anton Panda, Jozef Jurko, Jan Duplak, 2011, 2011 IEEE International Conference on Computer Science and Automation Engineering.

New Experimental Expression of Durability Dependence for Ceramic Cutting Tool

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

The Analysis of Ceramic Cutting Tools Durability in Machining Process of Steel C60 Applied According to Standard ISO 3685

Ján Duplák, Anton Panda, Jozef Jurko, 2013 .

Diagnostic and Experimental Valuation on Progressive Machining Unit

Anton Panda, Iveta Pandová, Tibor Krenický, 2014 .

Analysis of Selected Properties of Cutting Ceramics at Machining Process of Bearing Steel 100Cr6

Ján Duplák, Anton Panda, Marek Prislupčák, 2014 .

Changing Deformation under the Machined Surface in the Cutting Zone for the Different Materials during Drilling

Anton Panda, Jozef Jurko, Marcel Behún, 2014 .

USE OF VIBRODIAGNOSTICS TO PREDICT PHENOMENA IN SERIAL AUTOMOTIVE PRODUCTION

Anton Panda, Samuel Cehelsky, 2021, MM Science Journal.

Analysis of the Current State of Forecasting Objects and Phenomena

Anton Panda, Volodymyr Viacheslavovych Nahornyi, 2021 .

Application of the Developed Forecasting Methodology in Various Spheres of Human Activities

Anton Panda, Volodymyr Viacheslavovych Nahornyi, A. Panda, 2021 .

PRELIMINARY INVESTIGATION OF STATIC AND DYNAMIC HYSTERESIS OF DMSP-5 FLUIDIC MUSCLE

Sergej Hloch, Anton Panda, Jozef Jurko, 2018 .

Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6

Ján Duplák, Anton Panda, Jozef Jurko, 2011 .

Verification of Cutting Zone Machinability during the Turning of a New Austenitic Stainless Steel

Anton Panda, Jozef Jurko, Mário Gajdoš, 2011 .

Study of changes under the machined surface and accompanying phenomena in the cutting zone during drilling of stainless steels with low carbon content

Anton Panda, Mário Gajdoš, J. Jurko, 2011 .

Accompanying phenomena in the cutting zone machinability during turning of stainless steels

Anton Panda, Jozef Jurko, Mário Gajdoš, 2009 .

TRANSMISSION ERROR IN THE SYSTEMS OF MECHATRONICS

Anton Panda, A. Panda, 2013 .

A new approach for the determination of technological parameters for hydroabrasive cutting of materials

Jan Valíček, Marta Harničárová, Anton Panda, 2016 .

Monitoring and Evaluation of Production Processes

Anton Panda, Jozef Jurko, Iveta Pandová, 2016 .

Analytical Expression of T-vC Dependence in Standard ISO 3685 for Cutting Ceramic

Ján Duplák, Anton Panda, Jozef Jurko, 2011 .

Analysis of Cutting Tools Durability Compared with Standard ISO 3685

Ján Duplák, Anton Panda, Karol Vasilko, 2012 .

Monitoring of the condition of turning machine bearing housing through vibrations

Jan Valíček, Marta Harničárová, Anton Panda, 2018 .