Yuji Koetaka

发表

Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces

Yoshikazu Araki, Kshitij C. Shrestha, Toshihiro Omori, 2016 .

CRITERIA OF BUCKLING-RESTRAINED BRACES TO PREVENT OUT-OF-PLANE BUCKLING

Yuji Koetaka, Kazuo Inoue, Tomohiro Kinoshita, 2007 .

Mechanical property of beam-to-column moment connection with hysteretic dampers for column weak axis

Keiichiro Suita, Zhijun Zhang, Yuji Koetaka, 2005 .

Comparison of Damage, Design Concept and Design Practices of Column Base Connections in Japan and the United States

Keiichiro Suita, Yuji Koetaka, Toko Hitaka, 2005 .

AN EXPERIMENT OF A BUCKLING RESTRAINED BRACING OF LARGE SLENDERNESS RATIO AND THE DESIGN METHOD

Kazuo Inoue, Tamami Oryu, Yuji Koetaka, 2009 .

MECHANICAL PERFORMANCE AND SEISMIC RESPONSE OF KNEE BRACE DAMPER STRUCTURE OF H-SA700 HIGH STRENGTH STEEL MEMBERS MADE BY UNDERMATCHED WELDS

Keiichiro Suita, Yuji Koetaka, Naoki Shinsai, 2012 .

Feasibility of tension braces using Cu–Al–Mn superelastic alloy bars

Kshitij C. Shrestha, Nao Maekawa, Yuji Koetaka, 2014 .

22404 Design Criteria of BRB Connections for Prevention of Out-of-plane Buckling

Yuji Koetaka, Tomohiro Kinoshita, Ryusuke Kawakami, 2009 .

Application of Cu-Al-Mn superelastic alloy bars as reinforcement elements in concrete beams

Yoshikazu Araki, Takuya Nagae, Kshitij C. Shrestha, 2012, Smart Structures.

22545 An experimental study on structual behavior of Beam to Column Connections assembled heavy wall SHS without diaphragm. : Part1 Outline of experiments

Yuji Koetaka, Hideyuki Nakano, Yugo Sato, 2011 .

DEFORMATION CONCENTRATION PHENOMENA IN LOWER PART OF FRAMES ON COLLAPSE BY SEISMIC ANALYSIS WITH FISHBONE-SHAPED FRAMES

Keiichiro Suita, Yuji Koetaka, Takehiro Wakatsuki, 2013 .

22280 Seismic Design and Analysis of Steel Frames with a New Type of High Strength Bolted Beam-to-Column Connection : Part 1 Seismic Design and Analytical Model

Yuji Koetaka, Kazuo Inoue, Shishun Chou, 2003 .

Comparison of Beam-to-Column Connection Design for Ensuring Plastic Deformation Capacity in Japan and the United States

Keiichiro Suita, Yuji Koetaka, Toko Hitaka, 2005 .

Design and Experimental Verification on the Performance of the Buckling-Restrained Knee Brace

Yuji Koetaka, Kazuo Inoue, Shigehiro Morooka, 2005 .

Equivalent Single-Mass and Tri-Degree of Freedom System in consideration of Eccentricity in Strong Column Type Steel Moment Frames ( in Elasto-Plastic Response)

Yuji Koetaka, Akihisa Iwasaki, Y. Koetaka, 2005 .

THE IN-PLANE STORY-DRIFT LIMIT AND POST-LIMIT BEHAVIOR OF PRECAST CONCRETE CURTAIN WALLS DETAILED TO ACCOMMODATE FRAME DEFORMATION BY ROCKING MOTION

Keiichiro Suita, Yuji Koetaka, Tetsuya Sasaki, 2013 .

PLASTIC DEFORMATION CAPACITY DEMAND OF ENERGY ABSORPTION MEMBERS IN STRONG COLUMN TYPE STEEL SPACE FRAMES : One story-one bay frame with strength eccentricity

Yuji Koetaka, Kazuo Inoue, 1999 .

FULL-SCALE TEST OF WELD-FREE STEEL STRUCTURE WITH KNEE BRACE DAMPERS

Keiichiro Suita, Yuji Koetaka, Kazuo Inoue, 2005 .

OUT-OF-PLANE BUCKLING LOAD OF BUCKLING-RESTRAINED BRACES INCLUDING BRACE JOINTS

Yuji Koetaka, Kazuo Inoue, Hideaki Tembata, 2004 .

OUT-OF-PLANE STIFFNESS AND YIELD STRENGTH OF CRUCIFORM CONNECTION FOR BUCKLING-RESTRAINED BRACE

Yuji Koetaka, Kazuo Inoue, Tomohiro Kinoshita, 2008 .

Potential of superelastic Cu–Al–Mn alloy bars for seismic applications

Yoshikazu Araki, Toshihiro Omori, Yuji Koetaka, 2011 .

Feasibility of Cu–Al–Mn superelastic alloy bars as reinforcement elements in concrete beams

Yoshikazu Araki, Takuya Nagae, Kshitij C. Shrestha, 2013 .

DESIGN CRITERIA OF BUCKLING-RESTRAINED BRACE TO PREVENT OUT-OF-PLANE BUCKLING

Yuji Koetaka, Tomohiro Kinoshita, 2009 .