Josef Eberhardsteiner

发表

Investigating Various Influences on the Embedment Strength and Stiffenss of Wood

Michael Dorn, Karin Hofstetter, Viera Nohajová, 2011 .

MODELING ANISOTROPIC ELASTICITY OF MULTI-LAYER ENGINEERED WOOD PRODUCTS

Gerhard Schickhofer, Karin Hofstetter, Josef Eberhardsteiner, 2008 .

Application of stochastic finite element approaches to wood-based products

Josef Eberhardsteiner, Josef Füssl, Georg Kandler, 2016 .

An algorithm for adaptive introduction and arrangement of velocity discontinuities within 3D finite-element-based upper bound limit analysis approaches

Josef Eberhardsteiner, Josef Füssl, Mingjing Li, 2019, Computer Methods in Applied Mechanics and Engineering.

Semi-probabilistic design of rockfall protection layers

Christian Hellmich, Herbert A. Mang, Bernhard Pichler, 2008 .

Computational Mechanics for Advanced Timber Engineering : from material modeling to structural applications

Josef Eberhardsteiner, Josef Füssl, Thomas K. Bader, 2012 .

Load-Deformation Behavior of Single Dowel Connections in Timber Structures

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2015 .

Assessment of Protection Systems for Buried Steel Pipelines Endangered by Rockfall

Christian Hellmich, Herbert A. Mang, Bernhard Pichler, 2005 .

The influence of displacement boundary conditions on the embedment behavior of dowel-type fasteners

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Stochastic finite element approaches for wood-based products: theoretical framework and review of methods

Josef Eberhardsteiner, Josef Füssl, Georg Kandler, 2015, Wood Science and Technology.

On algorithmic stabilization of 2D contact analyses by means of a modified node-smoothing technique

Herbert A. Mang, Josef Eberhardsteiner, W. N. Liu, 2001 .

Experiments on the Load-Displacement Behavior of Dowel-Type Steel-To-Timber Connections

Karin Hofstetter, Josef Eberhardsteiner, Michael Dorn, 2011 .

Influence of the characteristic length on the strength properties of a material model for spruce wood.

Josef Eberhardsteiner, Martin Fleischmann, H. W. Muellner, 2006 .

Stiftförmige Verbindungsmittel im EC5 und baustatische Modellbildung mittels kommerzieller Statiksoftware

Josef Eberhardsteiner, Thomas K. Bader, Georg Hochreiner, 2013 .

Influence of Wooden Board Strength Class on the Performance of Cross‐laminated Timber Plates Investigated by Means of Full‐field Deformation Measurements

Erik Serrano, Josef Eberhardsteiner, Josef Füssl, 2014 .

Structural behaviour and design of dowel groups : experimental and numerical identification of stress states and failure mechanisms of the surrounding timber matrix

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2017 .

Computational Civil Engineering Mechanics - Elucidating General Features of Materials and Structures

Stefan Scheiner, Christian Hellmich, Bernhard Pichler, 2010 .

Numerical Modelling of Dowel Connections in Timber Constructions

Josef Eberhardsteiner, Thomas K. Bader, Wolfgang Lederer, 2013 .

Investigation of Mechanical Problems in the Application of Acetabulum Cups for Hip-Prosthesis

Josef Eberhardsteiner, Stjepan Jecić, Janoš Kodvanj, 2005 .

ECCOMAS Multidisciplinary Jubilee Symposiun: New computational challenges in materials, structures, and fluids

Herbert A. Mang, Josef Eberhardsteiner, J. Periaux, 2009 .

3D finite element analysis and experimental investigations of a new type of timber beam-to-beam connection

Josef Eberhardsteiner, Alfonsas Daniūnas, Tomas Gečys, 2015 .

Load Distribution in Multi-Dowel Timber Connections under Moment Loading : Integrative Evaluation of Multiscale Experiments

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Data for: Serviceability Limits of Reinforced Concrete Hinges

Herbert A. Mang, Josef Eberhardsteiner, Susanne Gmainer, 2019 .

Integrative Research for an Enhanced Design of Dowel Connections

Erik Serrano, Michael Schweigler, Michael Dorn, 2015 .

Rheologische Charakterisierung der Strangaufweitung von Kautschukmischungen mittels numerischer Simulationen Rheological Characterisation of the Die Swell Phenomena of Rubber Blends by Means of Numerical Simulation

Josef Eberhardsteiner, Wolfgang Fidi, Herbert W. Müllner, 2006 .

DIE VIELFALT DES BAUINGENIEURWESENS / THE DIVERSITY OF CIVIL ENGINEERING

Josef Eberhardsteiner, Ramona Schneider-Lauscher, 2015 .

ECCOMAS Multidisciplinary Jubilee Symposium

Christian Hellmich, Herbert A. Mang, Josef Eberhardsteiner, 2009 .

Sliding behaviour of simplified tire tread patterns investigated by means of FEM

Herbert A. Mang, Karin Hofstetter, Josef Eberhardsteiner, 2006 .

Discussion of common and new indicating properties for the strength grading of wooden boards

Josef Eberhardsteiner, Josef Füssl, Markus Lukacevic, 2015, Wood Science and Technology.

Computational multiscale analysis in civil engineering

Stefan Scheiner, Christian Hellmich, Roman Lackner, 2009 .

Three-Dimensional Modeling of Dowel-Type Steel-to-Timber Connections

Michael Dorn, Karin Hofstetter, Josef Eberhardsteiner, 2011 .

Zweiachsiges Testen anisotroper Werkstoffe: Konstruktion geeigneter Prüfmaschinen

Josef Eberhardsteiner, Rudolf Beer, F. Pulay, 1992 .

A Novel Approach for the Load-Displacement Behavior of Single-Dowel Connections in Laminated Veneer Lumber

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Experiments on dowel-type timber connections

Josef Eberhardsteiner, Karin de Borst, Michael Dorn, 2013 .

90th GAMM Annual Meeting of the International Association of Applied Mathematics and Mechanics, February 18-22, 2019, Vienna, Austria : book of abstracts

Joachim Schöberl, Josef Eberhardsteiner, 2019 .

Comparison of the Stability of Different Arthroscopic Tendon Fixation Techniques in Dynamic Tests

Josef Eberhardsteiner, Roland Reihsner, Werner Anderl, 2011 .

Die Fakultät für Bauingenieurwesen/The Faculty of Civil Engineering: Zukunft gestalten - Bestand erhalten/Shaping the Future - Conserving the Present

Josef Eberhardsteiner, Ramona Schneider-Lauscher, 2015 .

Comparison of unit cell-based computational methods for predicting the strength of wood

Josef Eberhardsteiner, Josef Füssl, Mingjing Li, 2017 .

Matrix Failure of Multi-Dowel Type Connections Engineering Modelling and Parameter Study

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Experimental Assessment of the Load Distribution in Multi-Dowel Timber Connections

Bertil Enquist, Michael Schweigler, Michael Dorn, 2016 .

Numerical Simulations of the Loading Process of Dowel-Type Timber Connections

Michael Dorn, Josef Eberhardsteiner, Thomas K. Bader, 2012 .

Ultimate limits of reinforced concrete hinges

Josef Eberhardsteiner, Herbert A. Mang, Markus Vill, 2020 .

Development of high-performance strand boards: engineering design and experimental investigations

Gerhard Schickhofer, Karin Hofstetter, Josef Eberhardsteiner, 2010, Wood Science and Technology.

Computational mechanics of materials and structures

Christian Hellmich, Christian Pichler, Roman Lackner, 2009 .

Micromechanical modeling of Common yew and Norway spruce

Josef Eberhardsteiner, Thomas K. Bader, Karin de Borst, 2013 .

A Thermo‐Mechanical Formulation Describing the Frictional Behavior of Rubber

Herbert A. Mang, Karin Hofstetter, Josef Eberhardsteiner, 2003 .

An engineering modeling approach for the load-deformation behavior of multi-dowel connections in timber structures

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2017 .

Orthotropic single-surface plasticity model for spruce wood including the effect of knots.

Josef Eberhardsteiner, Martin Fleischmann, Herbert W. Müllner, 2005 .

Universal morphological patterns in wood: Micromechanics-based prediction of anisotropic strength from composition and microstructure

Karin Hofstetter, Josef Eberhardsteiner, Ch. Hellmich, 2006 .

Numerical and Experimental Investigations of the Elasto-Plastic Behaviour of Wood-Steel Dowel Connections

Josef Eberhardsteiner, Thomas K. Bader, Wolfgang Lederer, 2013 .

Numerische analyse der beanspruchung von seilbahn-einlageringen

Josef Eberhardsteiner, S. Koch, K. Hofstetter, 2006 .

Timber Matrix Failure Modes in Multi-Dowel Connections

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Mechanical characterization of wood: An integrative approach ranging from nanoscale to structure

Joseph Gril, Josef Eberhardsteiner, Christian Jenkel, 2013 .

INSTITUT FÜR MECHANIK DER WERKSTOFFE UND STRUKTUREN / INSTITUTE FOR MECHANICS OF MATERIALS AND STRUCTURES

Josef Eberhardsteiner, Christian Hellmich, 2015 .

Numerical simulation tool for wooden boards with knots

Josef Eberhardsteiner, Josef Füssl, Markus Lukacevic, 2014 .

Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full‐Field Deformation Measurements

Josef Eberhardsteiner, Josef Füssl, Markus Lukacevic, 2014 .

Load-to-grain angle dependence of the embedment behavior of dowel-type fasteners in laminated veneer lumber

Michael Schweigler, Josef Eberhardsteiner, Thomas K. Bader, 2016 .

Numerical assessment of wood moisture content-based assignments to service classes in EC 5 and a prediction concept for moisture-induced stresses solely using relative humidity data

Josef Eberhardsteiner, Josef Füssl, Markus Lukacevic, 2021 .

Serviceability limits of reinforced concrete hinges

Herbert A. Mang, Bernhard Pichler, Josef Eberhardsteiner, 2020 .

Rubber Friction on Ice: Experiments and Modeling

Bernhard Pichler, Josef Eberhardsteiner, Bo N. J. Persson, 2016, Tribology Letters.

Is Low-Temperature Creep of Asphalt Mastic Independent of Filler Shape and Mineralogy?—Arguments from Multiscale Analysis

Roman Lackner, Josef Eberhardsteiner, Ronald Blab, 2005 .

A 3D finite element formulation describing the frictional behavior of rubber on ice and concrete surfaces

Herbert A. Mang, Josef Eberhardsteiner, W. N. Liu, 2001 .

Analysis of thick functionally graded plates by local integral equation method

Vladimir Sladek, Josef Eberhardsteiner, Jan Sladek, 2006 .

Biaxial testing of orthotropic materials using electronic speckle pattern interferometry

Josef Eberhardsteiner, J. Eberhardsteiner, 1995 .

Identification of viscoelastic properties by means of nanoindentation taking the real tip geometry into account

Roman Lackner, Josef Eberhardsteiner, Andreas Jäger, 2007 .

Non-prismatic beams: A simple and effective Timoshenko-like model

Josef Eberhardsteiner, Ferdinando Auricchio, Josef Füssl, 2016 .

Numerical Investigation of High-Pressure Hydraulic Hoses with Steel Wire Braid

Herbert A. Mang, Josef Eberhardsteiner, H. Rattensperger, 2003 .

Development of high-performance strand boards: multiscale modeling of anisotropic elasticity

Gerhard Schickhofer, Karin Hofstetter, Josef Eberhardsteiner, 2010, Wood Science and Technology.

Rheological characterization of the die swell phenomenon of rubber compounds

Josef Eberhardsteiner, Wolfgang Fidi, Herbert W. Müllner, 2007 .

A Continuum Micromechanics Approach to Elasticity of Strand-Based Engineered Wood Products: Model Development and Experimental Validation

Gerhard Schickhofer, Karin Hofstetter, Josef Eberhardsteiner, 2008 .

Cross‐laminated Timber Plates Subjected to Concentrated Loading

Josef Eberhardsteiner, Josef Füssl, Georg Hochreiner, 2014 .

Efficient treatment of rubber friction problems in industrial applications

Herbert A. Mang, Karin Hofstetter, Josef Eberhardsteiner, 2006 .

Experimental Investigation of Strain Behaviour of Heated Cement Paste and Concrete

Roman Lackner, Josef Eberhardsteiner, Matthias Zeiml, 2013 .

The relation between indentation modulus, microfibril angle, and elastic properties of wood cell walls

Karin Hofstetter, Josef Eberhardsteiner, Thomas K. Bader, 2011 .

Experimental investigation and identification of material parameters for rubber blends.

Josef Eberhardsteiner, André Wieczorek, J. Eberhardsteiner, 2006 .

Creep response of bituminous mixtures—rheological model and microstructural interpretation

Roman Lackner, Josef Eberhardsteiner, Josef Füssl, 2014 .

The Fifth World Congress on Computational Mechanics

Herbert A. Mang, Josef Eberhardsteiner, Franz G. Rammerstorfer, 2002 .

Failure modes and effective strength of two-phase materials determined by means of numerical limit analysis

Roman Lackner, Herbert A. Mang, Josef Eberhardsteiner, 2008 .

Strength predictions of clear wood at multiple scales using numerical limit analysis approaches

Josef Eberhardsteiner, Josef Füssl, Mingjing Li, 2018 .

Multiscale Modeling as the Basis for Reliable Predictions of the Behaviour of Multi-Composed Materials

Roman Lackner, Josef Eberhardsteiner, Ronald Blab, 2004 .

Experimental Determination of Shear‐Thinning Behaviour During Extrusion of Rubber Blends

Josef Eberhardsteiner, Herbert W. Müllner, André Wieczorek, 2011 .

Acoustical and Poromechanical Characterisation of Titanium Scaffolds for Biomedical Applications

Andreas Fritsch, Josef Eberhardsteiner, Herbert W. Müllner, 2008 .

Identification of residual gas-transport properties of concrete subjected to high temperatures

Roman Lackner, Josef Eberhardsteiner, Matthias Zeiml, 2008 .

Constitutive Modelling of Clear Spruce Wood under Biaxial Loading by means of an Orthotropic Single-Surface Model under Consideration of Hardening and Softening Mechanisms

Josef Eberhardsteiner, Peter Mackenzie-Helnwein, Herbert W. Müllner, 2004 .

The Counteracting Effects of Capillary Porosity and of Unhydrated Clinker Grains on the Macroscopic Strength of Hydrating Cement Paste–A Multiscale Model

Christian Hellmich, Bernhard Pichler, Josef Eberhardsteiner, 2013 .

Micromechanical modeling of solid-type and plate-type deformation patterns within softwood materials. A review and an improved approach

Christian Hellmich, Karin Hofstetter, Josef Eberhardsteiner, 2007 .

Spherical and acicular representation of hydrates in a micromechanical model for cement paste: prediction of early-age elasticity and strength

Christian Hellmich, Bernhard Pichler, Josef Eberhardsteiner, 2009 .

The poroelastic role of water in cell walls of the hierarchical composite “softwood”

Christian Hellmich, Karin Hofstetter, Josef Eberhardsteiner, 2011 .

Development and experimental validation of a continuum micromechanics model for the elasticity of wood

Christian Hellmich, Karin Hofstetter, Josef Eberhardsteiner, 2005 .

Constitutive Modelling of Biaxially Stressed Wood for the Analysis of Layered Wooden Shells

Josef Eberhardsteiner, Peter Mackenzie-Helnwein, Herbert W. Müllner, 2004 .

Effective stiffness prediction of GLT beams based on stiffness distributions of individual lamellas

Erik Serrano, Josef Eberhardsteiner, Josef Füssl, 2015, Wood Science and Technology.

Hybrid BE-FE Stress Analysis of the Excavation of a Tunnel Bifurcation on the Basis of a Substructuring Technique

Herbert A. Mang, Josef Eberhardsteiner, P. Torzicky, 1993 .

Structural design of Cross Laminated Timber (CLT) by advanced plate theories

Karin Hofstetter, Josef Eberhardsteiner, Reinhard Stürzenbecher, 2010 .

A numerical upper bound formulation with sensibly-arranged velocity discontinuities and orthotropic material strength behaviour

Josef Eberhardsteiner, Josef Füssl, Mingjing Li, 2018 .

Coupled material modelling and multifield structural analyses in civil engineering

Günther Meschke, Josef Eberhardsteiner, Peter Mackenzie-Helnwein, 2003 .

Poromechanical scale transitions of failure stresses in wood: from the lignin to the spruce level

Christian Hellmich, Karin Hofstetter, Josef Eberhardsteiner, 2010 .

Analysis of layered wooden shells using an orthotropic elasto-plastic model for multi-axial loading of clear spruce wood

Herbert A. Mang, Josef Eberhardsteiner, Peter Mackenzie-Helnwein, 2005 .

Synthesis of Constitutive Modelling of Triaxially Loaded Concrete and Finite Element Analysis of Thick-Walled RC Structures

Herbert A. Mang, Günther Meschke, Josef Eberhardsteiner, 1988 .

Determination of the linear elastic stiffness and hygroexpansion of softwood by a multilayered unit cell using poromechanics

Josef Eberhardsteiner, Thomas K. Bader, Karin de Borst, 2012 .

Modified node-smoothing method of non-smooth surfaces in FE analyses of 2D contact

Herbert A. Mang, Josef Eberhardsteiner, W. N. Liu, 2002 .

Unloading‐Based Stiffness Characterisation of Cement Pastes During the Second, Third and Fourth Day After Production

Bernhard Pichler, Josef Eberhardsteiner, J. Eberhardsteiner, 2015 .

Numerical Prediction of the Dimensioning of Tools for the Extrusion Process of Rubber Profiles

Josef Eberhardsteiner, Herbert W. Müllner, André Wieczorek, 2007 .

Bending strength predictions of cross-laminated timber plates subjected to concentrated loading using 3D finite-element-based limit analysis approaches

Josef Eberhardsteiner, Josef Füssl, Mingjing Li, 2019, Composite Structures.

Characterization and Multiscale Modeling of Asphalt - Recent Developments in Upscaling of Viscous and Strength Properties

Roman Lackner, Herbert A. Mang, Josef Eberhardsteiner, 2006 .