Mikael Bäckström

发表

Possibility of Modern Humidity Sensor Application in the Studies of Moisture Transport through the Sports and Outdoor Garments

Jonas Persson, Andrey Koptyug, Mats Ainegren, 2016, icSPORTS.

On the application of quality function deployment in integrated supervisory process control

Håkan Wiklund, Mikael Bäckström, 2000 .

Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges

Mikael Bäckström, Lars-Erik Rännar, Andrey Koptioug, 2014 .

Sports Technology Education at Mid Sweden University

Håkan Wiklund, Andrey Koptyug, Mikael Bäckström, 2013 .

Critical Factors Influencing Loss of Time after Shooting - A Case Study Performed During the 2008 IBU Biathlon World Championships

Håkan Wiklund, Mikael Bäckström, Lars-Erik Rännar, 2009 .

On the use of neural networks and statistical methods in the integrated supervisory process control concept

Håkan Wiklund, Mikael Bäckström, 1999 .

Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input

Mikael Bäckström, Marie Cronskär, Marie Cronskär, 2013 .

3D-printing: A Future “Magic Wand” for Global Manufacturing - How Can We Benefit from It Today for Sports and Health Care?

Mikael Bäckström, Lars-Erik Rännar, Andrey Koptyug, 2017 .

Integration of real-time quality control and process monitoring

Håkan Wiklund, Mikael Bäckström, 2000 .

Comparing the Performance of the Biathlon Rifles with Wooden and Titanium Frames

Mikael Bäckström, Andrey Koptyug, Victor Olsson, 2020, Proceedings.

An approach to integrated process monitoring and quality control of advanced machining

Håkan Wiklund, Mikael Bäckström, 1999 .

Cross-country ski vibrations and possible mechanisms of their influence on the free gliding

Andrey Koptyug, Mikael Bäckström, Mats Tinnsten, 2012 .

Gliding-induced Ski Vibrations: Approaching Proper Modeling

Andrey Koptyug, Mikael Bäckström, Mats Tinnsten, 2014 .

Adaptive Control of Machining Centres

Håkan Wiklund, Mikael Bäckström, Peter Bjurstam, 1993 .

A step towards integrated supervisory control of complex machining processes

Håkan Wiklund, Mikael Bäckström, 1998 .

QFD as a Tool to Improve Quality Control in a Complex Manufacturing Environment

Håkan Wiklund, Mikael Bäckström, 2004 .

New Materials for Additive Manufacturing in Metal: Back to Basics?

Andrey Koptyug, Mikael Bäckström, Lars-Erik Rännar, 2017 .

Integrated approach for prediction of stability limits for machining with large volumes of material removal

Peter Norman, Mikael Bäckström, Ales Svoboda, 2008 .

On monitoring and control of machining processes

Mikael Bäckström, 1999 .

Optimization of pacing strategies for variable wind conditions in road cycling

Mikael Bäckström, David Sundström, M. Bäckström, 2017 .

Design and Application of a Prototype System for Process Modelling and Control in Integrated Machining

Håkan Wiklund, Mikael Bäckström, 1997 .

A study of control chart for adjusted processes

Thong Ngee Goh, Håkan Wiklund, Min Xie, 1999 .

A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools

Mikael Bäckström, Hans Larsson, Phil Webb, 2003 .

Studies into the Mechanisms of the Cross-country Ski Vibrations and Possible Models of the Phenomenon☆

Andrey Koptyug, Mikael Bäckström, Mats Tinnsten, 2013 .

Deployment of quality and productivity requirements in integrated process control

Håkan Wiklund, Mikael Bäckström, 1999 .

Cross-country Ski Vibrations : Loaded Vs Unloaded Skis

Andrey Koptyug, Mikael Bäckström, Mats Tinnsten, 2012 .

Collaboration - a Key Factor for the Application of Discrete Event Simulation in Real World Manufacturing Industry

Mikael Bäckström, Jon Johansson, 2007 .

Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing

Mikael Bäckström, Lars-Erik Rännar, Marie Cronskär, 2015 .

Optimal distribution of power output and braking for corners in road cycling

Mikael Bäckström, Peter Carlsson, Mats Tinnsten, 2015 .

Essential Ski Characteristics for Cross-Country Skis Performance (P251)

Mikael Bäckström, Mats Tinnsten, Leon Dahlén, 2008 .

Laboratory Setup for the Cross Country Ski Vibrations Measurements: Methodology and First Results

Andrey Koptyug, Mikael Bäckström, Mats Tinnsten, 2012 .

Development of a multi-tooth approach to tool condition monitoring in milling

Håkan Wiklund, Mikael Bäckström, 1998 .

Performance of Adaptive Control : Significant Features

Mikael Bäckström, 1991 .

Taylor Made Titanium Insoles in Alpine Ski Boots

Mikael Bäckström, Lars-Erik Rännar, Leon Dahlén, 2009 .

Utveckling av ventilationsstyrning på Metso Paper

Mikael Bäckström, Tobias Pettersson, 2002 .

Tin Man- Making Spare Parts for Human Body

Andrey Koptyug, Mikael Bäckström, Lars-Erik Rännar, 2012 .

A New Wind Tunnel Facility Dedicated to Sports Technology Research and Development

Andrey Koptyug, Mikael Bäckström, Jonas Danvind, 2016 .

Body part surrogates for safety research

Andrey Koptyug, Mikael Bäckström, Nicola Petrone, 2021 .

New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)

Mikael Bäckström, Lars-Erik Rännar, Lars-Erik Rännar, 2016 .

Bulk Metallic Glass Manufacturing Using Electron Beam Melting

Andrey Koptyug, Mikael Bäckström, Lars-Erik Rännar, 2013 .

Implementation of digital design and solid free-form fabrication for customization of implants in trauma orthopaedics

Mikael Bäckström, Lars-Erik Rännar, Marie Cronskär, 2012 .

A Novel Instrumented Human Head Surrogate for the Impact Evaluation of Helmets

Nicola Petrone, Andrey Koptyug, Mikael Bäckström, 2018 .

Electron Beam Melting: Moving from Macro- to Micro- and Nanoscale

Mikael Bäckström, Lars-Erik Rännar, A. Koptioug, 2012 .