J. A. Vilán

发表

Feasible Geometrical Configurations for Split Torque Gearboxes With Idler Pinions

J. A. Vilán, Abraham Segade Robleda, Marcos López Lago, 2010 .

Modeling the milling tool wear by using an evolutionary SVM-based model from milling runs experimental data

Esperanza García Gonzalo, J. A. Vilán, Abraham Segade Robleda, 2015 .

Tests for the Optimization of Cut-Off Parameters for Seven Galician Granite Varieties

J. A. Vilán, Javier Taboada Castro, María Araújo Fernández, 2013 .

Support Vector Machines Used to Estimate the Battery State of Charge

Cecilio Blanco Viejo, J. A. Vilán, Paulino José García Nieto, 2013 .

Xatcobeo: Small Mechanisms for CubeSat Satellites - Antenna and Solar Array Deployment

J. A. Vilán, Jose Miguel Encinas Plaza, Fernando Aguado Agelet, 2010 .

Flight results: Reliability and lifetime of the polymeric 3D-printed antenna deployment mechanism installed on Xatcobeo & Humsat-D

J. A. Vilán, Fernando Aguado Agelet, Miguel López Estévez, 2015 .

THE ROCK PROCESSING SECTOR: PART I: CUTTING TECHNOLOGY TOOLS, A NEW DIAMOND SEGMENT BAND SAW PART II: STUDY OF CUTTING FORCES

J. A. Vilán, Abraham Segade Robleda, Marcos López Lago, 2010 .

Hydraulic system for generating electricity from wave energy

J. A. Vilán, Abraham Segade Robleda, Enrique Casarejos Ruiz, 2013 .

Technical design of the RPC-based ToF wall (iTOF) for the R3B experiment at FAIR

J. A. Vilán, Abraham Segade, Pablo Izquierdo, 2012 .

Air quality modeling in the Oviedo urban area (NW Spain) by using multivariate adaptive regression splines

J. A. Vilán, E. García–Gonzalo, P. Nieto, 2015, Environmental Science and Pollution Research.

FTIR quantitative analysis technique for gases. Application in a biomass thermochemical process.

J. A. Vilán, P. Eguía, E. Granada, 2012 .

A study of the influence of solar radiation and humidity in a bioclimatic traditional Galician agricultural dry storage structure (horreo)

J. A. Vilán, J. Míguez, R. Comesaña, 2012 .

Shape functional optimization with restrictions boosted with machine learning techniques

José M. Matías, Javier Martínez, J. A. Vilán, 2010, J. Comput. Appl. Math..

Evolutionary support vector regression algorithm applied to the prediction of the thickness of the chromium layer in a hard chromium plating process

P. J. García Nieto, Francisco Javier de Cos Juez, Fernando Sánchez Lasheras, 2014, Appl. Math. Comput..

CALIFA, a Dedicated Calorimeter for the R3B/FAIR

J. A. Vilán, E. Casarejos, I. Durán, 2014 .

Functional classification of ornamental stone using machine learning techniques

José M. Matías, Javier Martínez, J. A. Vilán, 2010, J. Comput. Appl. Math..

Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2014 .

Support Vector Machines and Multilayer Perceptron Networks Used to Evaluate the Cyanotoxins Presence from Experimental Cyanobacteria Concentrations in the Trasona Reservoir (Northern Spain)

P. J. García Nieto, J. R. Alonso Fernández, C. Díaz Muñiz, 2013 .

CFD analysis of the modification of the furnace of a TG–FTIR facility to improve the correspondence between the emission and detection of gaseous species

J. A. Vilán, P. Eguía, J. Porteiro, 2012 .

Identification of Granite Varieties from Colour Spectrum Data

Javier Martínez, J. A. Vilán, C. Ordóñez Galán, 2010, Sensors.

Non-linear analysis and calculation of the performance of a shelving protection system by FEM

P. J. García Nieto, J. J. del Coz Díaz, J. A. Vilán, 2011, Appl. Math. Comput..

Analysis and study of an automobile rear seat by FEM

P. J. García Nieto, José M. Matías, J. J. del Coz Díaz, 2009, Int. J. Comput. Math..

Non-linear analysis of a reinforced concrete sheet cover (umbrella) of 40m diameter by the finite element method

P. J. García Nieto, J. J. del Coz Díaz, J. A. Vilán, 2007, Appl. Math. Comput..

A new predictive model based on the PSO-optimized support vector machine approach for predicting the milling tool wear from milling runs experimental data

J. A. Vilán, P. J. García-Nieto, E. García-Gonzalo, 2016 .

The use of design of experiments to improve a neural network model in order to predict the thickness of the chromium layer in a hard chromium plating process

P. J. García Nieto, Fernando Sánchez Lasheras, J. J. del Coz Díaz, 2010, Math. Comput. Model..

Nonlinear analysis of the pressure field in industrial buildings with curved metallic roofs due to the wind effect by FEM

P. J. García Nieto, J. J. del Coz Díaz, J. A. Vilán, 2013, Appl. Math. Comput..

Non-linear buckling analysis of a self-weighted metallic roof by FEM

P. J. García Nieto, J. J. del Coz Díaz, J. A. Vilán, 2010, Math. Comput. Model..

Non-linear analysis and warping of tubular pipe conveyors by the finite element method

P. J. García Nieto, J. J. del Coz Díaz, J. A. Vilán, 2007, Math. Comput. Model..