Ryuta Sato

发表

Investigation of the influence of NC controller and control mode by machining tests of blades on machining time

Masanobu Hasegawa, Akira Saito, Takayuki Iwasaki, 2017 .

Active vibration suppression of NC machine tools for high-speed contouring motions

Ryuta Sato, Keiichi Shirase, Hideaki Hayashi, 2020, Journal of Advanced Mechanical Design, Systems, and Manufacturing.

Measurement of Motion Trajectory using Accelerometers

Ryuta Sato, Kotaro Nagaoka, Tomonori Sato, 2010 .

Automated Measuring Planning for On-Machine Measurement and Re-Machining Process

Ryuta Sato, Keiichi Shirase, Motoaki Murase, 2019 .

1408 Voxel Representation of Removal Volume to Enhance Autonomy of Digital Copy Milling System

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2012 .

Effect of CAD/CAM Post Process on S-Shaped Machining Test for Five-Axis Machining Center

Ryuta Sato, Yukitoshi Ihara, Koichiro Takubo, 2019, Int. J. Autom. Technol..

B12 Active Tool Motion Control Referring Voxel Property of Removal Volume Voxel Model in Digital Copy Milling

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2012 .

D3 Development of Quadrant Glitch Compensation Corresponding to Friction Force Change(Precision positioning and control technology)

Masaomi Tsutsumi, Ryuta Sato, Takuro Higuchi, 2009 .

B11 Decision Method of Workpiece Setting Based on Predicated Machinable Space of 5-axis Machine Tool

Ryuta Sato, Keiichi Shirase, Tomoyuki Nishiyama, 2012 .

Influence of motion error of feed drive systems onto machined surface generated by ball end mill

Ryuta Sato, Keiichi Shirase, Yuki Sato, 2014 .

Compensation of Quadrant Glitches with Two Peaks in Circular Motions of Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Takuro Higuchi, 2012 .

Proposal of Process Planning System for End-Milling Operation Considering Product Design Constraints

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

Tool Motion Control Referring Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2013 .

Measurement and Simulation of Electric Power Consumption of Feed Drive Systems

Ryuta Sato, Keiichi Shirase, Akio Hayashi, 2013 .

P001 Monitoring Method of Cutting Condition Based on Predicted Cutting Torque

Ryuta Sato, Keiichi Shirase, Muneharu Tatekawa, 2016 .

3321 Influence of Motion Error of Feed Drives Systems on Machined Surface

Ryuta Sato, Kentaro Nishio, Keiichi Shirse, 2011 .

Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator

Masaomi Tsutsumi, Ryuta Sato, Noriyuki Kato, 2013 .

A029 A Concept of Total Removal Volume Feature in Selecting Machining Sequence for Generative Automated Process Planning

Ryuta Sato, Keiichi Shirase, Mohammad Mi’radj Isnaini, 2013 .

Evaluation of Circular Motion Path in NC Machine Tools based on Normal Vector Direction Changes

Ryuta Sato, Keiichi Shirase, Mitsunari Oda, 2017 .

111 Controller Tuning Method of Feed Drive Systems for Multi-axis Machine Tools

Masaomi Tsutsumi, Ryuta Sato, Yutaka Ide, 2006 .

Method for generating CNC programs based on block-processing time to improve speed and accuracy of machining curved shapes

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2018 .

Dynamic synchronous accuracy of translational and rotary axes

Masaomi Tsutsumi, Ryuta Sato, 2011 .

Proposal of Sensor-Less Cutting Force Monitoring Method Based on Equivalent Cutting Force Prediction Using Real Time End Milling Simulator

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2020 .

Motion Trajectory Measurement of NC Machine Tools Using Accelerometers

Ryuta Sato, Kotaro Nagaoka, 2011, Int. J. Autom. Technol..

Surface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation

Ryuta Sato, Keiichi Shirase, Atsushi Hakotani, 2012 .

S131011 Energy Consumption of Spindle and Feed Drive Systems of NC Machine Tool in End-milling Operation

Ryuta Sato, Keiichi Shirase, Akio Hayashi, 2013 .

Controller Design Method of Feed Drive Systems for Improving Multi-axis Synchronous Accuracy

Masaomi Tsutsumi, Ryuta Sato, Yutaka Ide, 2007 .

Research Consortium of Manufacturing Technologies for Smart Factory

Ryuta Sato, Atsushi Matsubara, Koichi Morishige, 2019 .

A Modification of Geometric Error Model of Five-axis Machine Tools with the Consideration of Workpiece Coordinate System

Ryuta Sato, Keiichi Shirase, Zongze Li, 2020 .

Influence of Motion Error of Translational and Rotary Axes onto Machined Surface Generated by Simultaneous Five-axis Motion☆

Ryuta Sato, Keiichi Shirase, Gianni Campatelli, 2014 .

Influence of NC Program Quality and Geometric Errors Onto S-Shape Machining Accuracy

Ryuta Sato, Keiichi Shirase, Yukitoshi Ihara, 2018, Volume 4: Processes.

Time domain coupled simulation of machine tool dynamic behaviour and cutting force based on voxel simulator of machining operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

Influence of NC Program Quality and Geometric Errors of Rotary Axes on S-Shaped Machining Test Accuracy

Ryuta Sato, Keiichi Shirase, Yukitoshi Ihara, 2018 .

3233 Wear Estimation of Ball Screw and Support Bearing Based on Servo Signals in Feed Drive System

Ryuta Sato, 2011 .

High Performance Motion Control of Rotary Table for 5-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, R. Sato, 2007, Int. J. Autom. Technol..

Influences of geometric and dynamic synchronous errors onto machined surface in 5-axis machining center

Ryuta Sato, Keiichi Shirase, Shogo Hasegawa, 2016 .

D02 Development of Machining Operation Planning System to Generate NC Data Automatically by Reconfiguring Past Machining Information

Ryuta Sato, Keiichi Shirase, Isnaini Mohammad, 2014 .

Sensitivity analysis of relationship between error motions and machined shape errors in five-axis machining center - Peripheral milling using square-end mill as test case -

Ryuta Sato, Keiichi Shirase, Dragan Milutinovic, 2019 .

Sensitivity Analysis in Ballbar Measurement of 3D Circular Interpolation Motion Equivalent to Cone-Frustum Cutting in Five-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Yukitoshi Ihara, 2012 .

3D circular interpolation motion equivalent to cone-frustum cutting in five-axis machining centers and its sensitivity analysis

Masaomi Tsutsumi, Ryuta Sato, Noriyuki Kato, 2012 .

Measurement and Evaluation of Electric Power Consumption of Feed Drive Systems in NC Machine Tool

Ryuta Sato, Keiichi Shirase, Akio Hayashi, 2013 .

An educational method for enhancing the ability to design innovative products

Ryuta Sato, Toshiya Kaihara, Toshiharu Taura, 2017 .

Motion Accuracy Enhancement of Five-Axis Machine Tools by Modified CL-Data

Masanobu Hasegawa, Ryuta Sato, Keiichi Shirase, 2018, Int. J. Autom. Technol..

Automated On-Machine Measurement Based on Process Planning Information

Ryuta Sato, Keiichi Shirase, Motoaki Murase, 2019, Transactions of the Institute of Systems, Control and Information Engineers.

Dynamic Synchronous Accuracy of Translational Axes and Rotational Axes in 5-axis Machining Center

Masaomi Tsutsumi, Ryuta Sato, Yuya Yokobori, 2006 .

Automation of Bending Sequence Planning and Path Generation to Realize Autonomous Sheet Metal Bending by Industrial Robot

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Surface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2013, Int. J. Autom. Technol..

Study on the evaluation method for finished surface based on human visual characteristic

Ryuta Sato, Keiichi Shirase, Mitsunari Oda, 2016, 2016 International Symposium on Flexible Automation (ISFA).

Evaluation of Synchronous Motion in Five-axis Machining Centers With a Tilting Rotary Table

Masaomi Tsutsumi, Ryuta Sato, Daisuke Yumiza, 2007 .

A001 Influence of Motion Error of Feed Drive Systems onto Machined Surface Generated by Ball End-mill

Ryuta Sato, Keiichi Shirase, Yuki Sato, 2013 .

Evaluation Method for Behavior of Rotary Axis Around Motion Direction Changing

Ryuta Sato, Keiichi Shirase, Shogo Hasegawa, 2017, Int. J. Autom. Technol..

Analysis of the Coupled Vibration Between Feed Drive Systems and Machine Tool Structure

Ryuta Sato, Keiichi Shirase, Gen Tashiro, 2015, Int. J. Autom. Technol..

320 Attempt on Measurement of Perpendicularity of Motion at Machining Center

Masaomi Tsutsumi, Ryuta Sato, Tomoyuki Saiki, 2006 .

Machinable Space Derivation of 5-Axis and Multi-Tasking Machine Tools for Workpiece Setting Decision

Ryuta Sato, Keiichi Shirase, Tomoyuki Nishiyama, 2013 .

Synchronous Accuracy of Translational and Rotary Axes in 5-axis Machining Centers(Precision positioning and control technology)

Masaomi Tsutsumi, Ryuta Sato, Yuya Yokobori, 2005 .

Method to evaluate speed and accuracy performance of CNC machine tools by speed-error 2-D representation

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2019 .

A31 Cutting Force Estimation Based on Frequency Analysis of Servo Information in Ball Screw Drive Machine Tools

Ryuta Sato, Keiichi Shirase, Makoto Hasegawa, 2012 .

Enhancement of Motion Accuracy for Cone-Frustum Cutting Motion by Modified NC Program

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018, Volume 4: Processes.

Dynamic Behavior of Feed Drive Systems Including Rotary Axis

Masaomi Tsutsumi, Ryuta Sato, Yuya Yokobori, 2004 .

Development of the Evaluation Tool for Visible Glitches on Finished Surface

Ryuta Sato, Keiichi Shirase, Mitsunari Oda, 2018 .

Experimental evaluation of mechanical and electrical power consumption of feed drive systems driven by a ball-screw

Ryuta Sato, Keiichi Shirase, Massimiliano Rigacci, 2020 .

Cutting Trouble Detection Based on Quantitative Comparison between Predicted and Measured Cutting Torques in End-milling Operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

Optimal workpiece orientation to reduce the energy consumption of a milling process

Ryuta Sato, Gianni Campatelli, Antonio Scippa, 2015 .

0104 Study on the Machine Bed Support for Improving the Motion Accuracy

Ryuta Sato, Keiichi Shirase, Yusaku Shirahama, 2015 .

Influence of Servo Characteristics on Motion Accuracy of Parallel Kinematic Mechanism

Ryuta Sato, Keiichi Shirase, Michitaka Maegawa, 2012 .

Coupled Simulation between Machine Tool Behavior and Cutting Force using Voxel Simulator

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

S1310205 Study on adaptive revision of cutting conditions in machining operation planning which refers past machining operations

Ryuta Sato, Keiichi Shirase, Yusaku Shinoki, 2015 .

Influence of Motion Errors of Feed Drive Systems on Machined Surface

Ryuta Sato, Keiichi Shirase, Kentaro Nishio, 2012 .

Geometric Error Compensation of Five-Axis Machining Centers Based on On-Machine Workpiece Measurement

Ryuta Sato, Keiichi Shirase, 2018, Int. J. Autom. Technol..

Mathematical Model of a CNC Rotary Table Driven by a Worm Gear

Ryuta Sato, 2012, Int. J. Intell. Mechatronics Robotics.

Synchronous motion of translational and rotary axes to evaluate the behavior of rotary axis

Ryuta Sato, Keiichi Shirase, Shogo Hasegawa, 2016, 2016 International Symposium on Flexible Automation (ISFA).

An International Design Engineering School for Enhancing the Synthetic Thinking Ability

Ryuta Sato, Toshiya Kaihara, Toshiharu Taura, 2017 .

E36 Development of Torque-follow Compensator Corresponding to Friction Force Change, and High-accuracy Compensation of Quadrant Glitches

Masaomi Tsutsumi, Ryuta Sato, Takuro Higuchi, 2008 .

A Method for Evaluating the Speed and Accuracy of CNC Machine Tools

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2017 .

Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations

Masaomi Tsutsumi, Ryuta Sato, Noriyuki Kato, 2013 .

Development of a Feed Drive Simulator

Ryuta Sato, 2012 .

Applicability assessment and adaptation method of cutting conditions based on acceptable area to select cutting conditions for end-milling operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2020 .

Tool Approach Mark Elimination Method for Ball End-milling Operation

Ryuta Sato, Keiichi Shirase, Tadahiro Nishiguchi, 2017 .

Mathematical Model of Feed Drive Systems Consisting of AC Servo Motor and Linear Ball Guide

Masaomi Tsutsumi, Ryuta Sato, 2005 .

Machining Operation Process Planning System Considering User Strategies and Intentions

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

Time domain coupled simulation of machine tool dynamics and cutting forces considering the influences of nonlinear friction characteristics and process damping

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2020 .

Influence of Contact between Tool and Workpiece onto Vibration Characteristic of Machine Tools

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2019 .

Tool Path Evaluation based on Electric Power Consumption of Feed Drive Systems in NC Machine Tool

Ryuta Sato, Keiichi Shirase, Yuta Inoue, 2014 .

609 Operation Planning System by Referring Previous Machining Cases to Reuse Operator's Know-How

Ryuta Sato, Keiichi Shirase, Mohammad Mi’radj Isnaini, 2015 .

3338 Active Tool Motion Control utilizing Voxel Property to Removal Volume in Digital Copy Milling

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2011 .

S142011 On-Machine Measurement Based on Copying Principle Using Laser Displacement Sensor

Ryuta Sato, Keiichi Shirase, Tasuku Teraoka, 2013 .

A028 Motion Path Evaluation based on Energy Consumption of Feed Drive System in NC Machine Tool

Ryuta Sato, Keiichi Shirase, Yuta Inoue, 2013 .

Motion Control Techniques for Synchronous Motions of Translational and Rotary Axes

Masaomi Tsutsumi, Ryuta Sato, 2012 .

Modeling and Controller Tuning Techniques for Feed Drive Systems

Masaomi Tsutsumi, Ryuta Sato, R. Sato, 2005 .

Cutting Force Monitoring based on the Frequency Analysis of Feed Motor Torques

Ryuta Sato, Keiichi Shirase, Makoto Hasegawa, 2013 .

Adaptive correction method of cutting conditions in machining operation planning which refers past machining cases: (2 nd Report: Expanded correction method by qualified relaxation of machining requirements)@@@（第 2 報：制約条件緩和による切削条件修正法の拡張）

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2016 .

Measurement of Synchronous Motion in Five-axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Daisuke Yumiza, 2006 .

A Study on the Mathematical Model of Feed Drive Mechanism for Machine Tools

Masaomi Tsutsumi, Ryuta Sato, Masahiro Yamada, 2002 .

Customized End Milling Operation of Dental Artificial Crown Without CAM Operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018, Int. J. Autom. Technol..

Comparison of Japanese and European NCs through Wing Profile Machining Test

Masanobu Hasegawa, Akira Saito, Ryuta Sato, 2016 .

Process planning system of 5-axis machining center considering constraint condition

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2016, 2016 International Symposium on Flexible Automation (ISFA).

Autonomous End Milling Operation of Dental Prostheses without CAM Operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Improvement of Simultaneous 5-Axis Controlled Machining Accuracy by CL-Data Modification

Masanobu Hasegawa, Akira Saito, Takayuki Iwasaki, 2019, Int. J. Autom. Technol..

Sensitivity Analysis in Ball Bar Measurement of Three-Dimensional Circular Movement Equivalent to Cone-Frustum Cutting in Five-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Yukitoshi Ihara, 2013 .

1906 Generative Machining Process Planning System Based on Total Removal Volume Concept

Ryuta Sato, Keiichi Shirase, Mohammad Mi’radj Isnaini, 2015 .

Time Domain Coupled Simulation between Behavior of Machine Tool Drive Systems and Cutting Force in End-milling Operation

Ryuta Sato, Keiichi Shirase, Shin Noguchi, 2016 .

Workpiece Setup Simulation based on Machinable Space of Five-axis Machining Centers☆

Ryuta Sato, Keiichi Shirase, Mohammad Mi’radj Isnaini, 2014 .

Energy Consumption of Drive System in NC Machine Tools During Peripheral Milling Operation

Ryuta Sato, Keiichi Shirase, Akio Hayashi, 2015 .

Tool Motion Control Referring to Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation

Ryuta Sato, Keiichi Shirase, Tomokazu Kobayashi, 2014, Int. J. Autom. Technol..

3398 Study on Compensation of Quadrant Glitches with Two Peaks in Circular Motions of Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Hiromichi Kunisada, 2011 .

Derivation of Process Plan Reflecting User’s Intention in Automate Process Planning System for Milling Operation

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Motion Accuracy Enhancement of 5-axis Machine Tools by Modified CL-data

Masanobu Hasegawa, Akira Saito, Ryuta Sato, 2017 .

Motion Simulation of NC Machine Tools Considering Rubber Sheet's Property under Machine Bed Supports

Ryuta Sato, Keiichi Shirase, Kohei Ishida, 2019 .

Development of a CAD-CAM Interaction System to Generate a Flexible Machining Process Plan

Ryuta Sato, Keiichi Shirase, Yusaku Shinoki, 2015, Int. J. Autom. Technol..

S141016 Generation of NC program corresponding to raw material shape to eliminate waste time for air-cut motion

Ryuta Sato, Keiichi Shirase, Tasuku Teraoka, 2012 .

C05 State Space Equation Model of NC Machine Tool with Torsion Vibration of Bed and Friction of Feed Drive Mechanism

Ryuta Sato, Keiichi Shirase, Yusuke Takasuka, 2014 .

Machine Bed Support with Sliding Surface for Improving the Motion Accuracy

Ryuta Sato, Keiichi Shirase, Yusaku Shirahama, 2016, Int. J. Autom. Technol..

Finished Surface Simulation Method to Predicting the Effects of Machine Tool Motion Errors

Ryuta Sato, Keiichi Shirase, Yuki Sato, 2014, Int. J. Autom. Technol..

G25 Study on evaluation methods of synchronous motion accuracy of five-axis machining centers

Masaomi Tsutsumi, Ryuta Sato, Daisuke Yumiza, 2006 .

High Performance Motion Control of Rotary Axis for Simultaneous Multi-axis Controlled Motions

Masaomi Tsutsumi, Ryuta Sato, Daisuke Endo, 2008 .

Mathematical Model of Linear Motor Stage with Non-Linear Friction Characteristics

Masaomi Tsutsumi, Ryuta Sato, Satoshi Kaneko, 2008 .

Spindle speed ramp-up test: A novel experimental approach for chatter stability detection

Ryuta Sato, Gianni Campatelli, Niccolò Grossi, 2015 .

Analysis and Feedback Control of Motion Errors Caused by Servo Characteristics in Parallel Kinematic Mechanism with Multi-Degree of Freedom

Ryuta Sato, Keiichi Shirase, Michitaka Maegawa, 2013 .

1509 Measurement Method of Simultaneous Three Axes control Motion at Machining Center

Hiroshi Suzuki, Masaomi Tsutsumi, Ryuta Sato, 2006 .

Enhancement of geometric accuracy of five-axis machining centers based on on-machine workpiece measurement

Ryuta Sato, 2016 .

S1310206 On-Machine Measurement and Corrective Machining Using Laser Displacement Sensor

Ryuta Sato, Keiichi Shirase, Tasuku Teraoka, 2014 .

Experimental Evaluation on the Friction Characteristics of Linear Ball Guides

Masaomi Tsutsumi, Ryuta Sato, Daisuke Imaki, 2007 .

Dynamic Behavior of Feed Drive Systems around Quadrant Changes in Circular Motion

Masaomi Tsutsumi, Ryuta Sato, Kazuo Nagashima, 2006 .

Energy Consumption of Feed Drive Systems Based on Workpiece Setting Position in Five-Axis Machining Center

Ryuta Sato, Keiichi Shirase, Akio Hayashi, 2018 .

Determination of Cutting Conditions for NC Program Generation by Reusing Machining Case Data based on Removal Volume Feature

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

B32 Influence of Friction Characteristics on Dynamic Behavior of Feed Drive System of Machine Tools

Masaomi Tsutsumi, Ryuta Sato, Kazuki Kamata, 2008 .

Machining operation planning system which utilize past machining operation data to generate new NC program

Ryuta Sato, Keiichi Shirase, Mohammad Mi’radj Isnaini, 2015 .

3D Model Construction of Cutting Tools and Identification of Workpieces Using Machine Vision for Virtual Machining Simulation

Ryuta Sato, Keiichi Shirase, Mamoru Nishiyama, 2012 .

Machines trajectory measuring device, numerically controlled machine tool and machine motion track measurement procedure

Ryuta Sato, Kotaro Nagaoka, Tomonori Sato, 2009 .

Feed Drive Simulator

Ryuta Sato, 2011, Int. J. Autom. Technol..

Finished Surface Analysis of Cone Frustum Generated by Simultaneous 5-Axis Controlled Motion

Ryuta Sato, Keiichi Shirase, Kentaro Nishio, 2013 .

Generation Mechanism of Quadrant Glitches and Compensation for it in Feed Drive Systems of NC Machine Tools

Ryuta Sato, R. Sato, 2012, Int. J. Autom. Technol..

Automatic process planning system for end-milling operation considering CAM operator's intention

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Study on the Influence of Geometric Errors in Rotary Axes on Cubic-machining Test Considering the Workpiece Coordinate System

Ryuta Sato, Keiichi Shirase, Shigehiko Sakamoto, 2021 .

Vibration Mode and Motion Trajectory Simulations of an Articulated Robot by a Dynamic Model Considering Joint Bearing Stiffness

Ryuta Sato, Keiichi Shirase, Yuya Ito, 2021, Int. J. Autom. Technol..

Influence of Tool Length and Profile Errors on the Inaccuracy of Cubic-Machining Test Results

Ryuta Sato, Keiichi Shirase, Shigehiko Sakamoto, 2021 .

Nanometer-Order Contouring Control in a Feed Drive System Using Linear Ball Guides by Applying a Combination of Modified Disturbance Observer and Repetitive Control

Ryuta Sato, Shigeru Futami, Tomofumi Ohashi, 2021 .

Analytical time constant design for jerk-limited acceleration profiles to minimize residual vibration after positioning operation in NC machine tools

Ryuta Sato, Keiichi Shirase, 2021 .

Power Consumption Simulation of Servo Motors Focusing on the Influence of Mechanical Vibration on Motor Efficiency

Ryuta Sato, Keiichi Shirase, Massimiliano Rigacci, 2022, Int. J. Autom. Technol..

Influence of Torsional Damping and Lead of Ball-screw onto Vibration Characteristics of Feed Drive System

Ryuta Sato, Keiichi Shirase, Nagao Atsushi, 2017 .

Virtual milling force monitoring method based on in-process milling force prediction model to eliminate predetermination of cutting coefficients

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Instantaneous rigid force model based on oblique cutting to predict milling force

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2017 .

Cutting Force and Finish Surface Simulation of End Milling Operation in Consideration of Static Tool Deflection by Using Voxel Model

Ryuta Sato, Keiichi Shirase, Isamu Nishida, 2018 .

Sensor-less estimation of positioning reversal value for ball screw feed drives

Ryuta Sato, 2019, Precision Engineering.

A method for the evaluation and magnified representation of two-dimensional contouring error

Ryuta Sato, Toshiaki Otsuki, Hiroyuki Sasahara, 2017 .

Quadrant Glitch Compensator Based on Friction Characteristics in Microscopic Region

Masaomi Tsutsumi, Ryuta Sato, Yoshimichi Terashima, 2008 .