Eiji Inoue

发表

Collision Vibration Characteristics with Interspace in Knife Driving System of Combine Harvester

Kunio Sato, Takashi Fukushima, Eiji Inoue, 2012 .

Functionality of DAQ-Middleware

Eiji Inoue, Yoshiji Yasu, Kazuo Nakayoshi, 2010, IEEE Transactions on Nuclear Science.

Feasibility Study on Field Monitoring and Work Recording System in Agriculture

Teruaki Nanseki, Tomohiro Miyazaki, Eiji Inoue, 2011 .

Predictive models for yield and protein content of brown rice using support vector machine

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2013 .

Travel resistance of the agricultural rubber crawler (Part 2): analytical simulation of travel resistance caused by rolling resistance of the track rollers.

Takaaki Matsuo, K. Hashiguchi, Eiji Inoue, 2000 .

Position measurement for a mobile weed mowing robot by a camera and a laser rangefinder

Kyoichi Tatsuno, Eiji Inoue, Katsumi Yoshino, 2017, 2017 International Symposium on Micro-NanoMechatronics and Human Science (MHS).

Session 10 Vehicle Dynamics & Terramechanics : STUDIES ON VIBRATION CHARACTERISTICS OF THE RUBBER CRAWLER - Dynamic characteristics of the fixed track rollers and movable track rollers -

Eiji Inoue, Jun Sakai, Shigeki Inaba, 1993 .

Shape model of grain and straw using coupling elements and flight simulation of threshing unit of combine by discrete element method

Yuko Ueka, Eiji Inoue, Muneshi Mitsuoka, 2014 .

Wavelet Analysis of the Vibration Acceleration for Field Machines

陳山鵬, Eiji Inoue, Muneshi Mitsuoka, 2003 .

Basic studies on characteristics of the power for combine harvester

Takaaki Matsuo, Eiji Inoue, Shigeki Inaba, 1995 .

Studies on vibration characteristics of rubber crawler system equipped with movabale track rollers (part 1) - dynamic model and driving simulations.

Koichi Hashiguchi, Eiji Inoue, Yasumaru Hirai, 2000 .

Study on improvement of measurement accuracy for external sensor by neural network system.

Eiji Inoue, K. Yada, K. Hashiguchi, 2000 .

Numerical Analysis of Cleaning Wind in a Winnowing Chamber Using the Finite Volume Method

Eiji Inoue, Yasumaru Hirai, Masami Matsui, 2005 .

Parameter sensitivity for tractor lateral stability against Phase I overturn on random road surfaces

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2016 .

Turbulent Flow Characteristics of the Cleaning Wind in Combine Harvester

Yuko Ueka, Eiji Inoue, Muneshi Mitsuoka, 2012 .

Investigation of nonlinear vibration characteristics of agricultural rubber crawler vehicles

Eiji Inoue, Mitsuoka Muneshi, Ma Rabbani, 2011 .

Effects on Partially Shallow Tilling and Sowing Method on the Quality and Yield ofWheat (Triticum aestivum L.) and Labor-Saving Cultivation

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2013 .

Remote control console of mowing robot with image monitor

Kyoichi Tatsuno, Eiji Inoue, Katsumi Yoshino, 2017, 2017 International Symposium on Micro-NanoMechatronics and Human Science (MHS).

Distribution and Spectrum Analysis of Noise on a Combine Harvester

坂井純, Eiji Inoue, Jun Kashima, 1993 .

Feature Extraction of Field Environmental Information Using the Change Point Analysis Method

Teruaki Nanseki, Eiji Inoue, Muneshi Mitsuoka, 2013 .

Measurement of Displacement for a Mowing Robot

Kyoichi Tatsuno, Eiji Inoue, Katsumi Yoshino, 2017 .

Prediction Methodology for Traction Drive Characteristics of Half-Toroidal Variator System

Eiji Inoue, Yoshitaka Tamoto, Toshihiro Saito, 2017 .

Prediction of the vibration characteristics of half-track tractor considering a three-dimensional dynamic model

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2011 .

Shattered Rice Grain Loss Attributable to the Combine Harvester Reel:Model Formulation and Fitting to Field Data

Moses Frank Oduori, T. O. Mbuya, Jun Sakai, 2008 .

Proposal of position measurement method for mowing robotin Power Distribution: -Camera and method using LRF-@@@―カメラとLRFを用いた方法―

Kyoichi Tatsuno, Katsumi Yoshino, Eiji Inoue, 2017 .

Development of a Technique to Reduce Combine Header Losses in Soybeans (Part 1)

Yoshisada Nagasaka, Eiji Inoue, Yutaka Kanetani, 2007 .

Vibration Characteristics and Identification of Dynamic Parameters of the Rubber Crawler System for Farm Machinery

Eiji Inoue, Muneshi Mitsuoka, Hideyuki Konya, 2002 .

Changes in Structure and Mechanical Properties of Isahaya Bay Reclamation Soil by Agricultural Vehicle Traffic

Tomohiro Miyazaki, Eiji Inoue, Takashi Okayasu, 2012 .

Autonomous mowing robot using a tracking laser rangefinder

Kyoichi Tatsuno, Eiji Inoue, Katsumi Yoshino, 2017, 2017 International Symposium on Micro-NanoMechatronics and Human Science (MHS).

Effects of Partially Shallow Tilling and Sowing Method on the Growth and the Yield of Soybean (Glicine max L.) in Upland Filed Converted from Paddy Field

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2013 .

Basic Studies on Active Noise Control of a Japanese Head Feeding Combine

坂井純, Eiji Inoue, Jun Kashima, 1994 .

Development of stability indicators for dynamic Phase I overturn of conventional farm tractors with front axle pivot

Zhen Li, Eiji Inoue, Muneshi Mitsuoka, 2015 .

Basic Studies on the Dynamic Characteristics of a Riding Tractor with Rotary Tiller (Part 2)

Eiji Inoue, Jun Sakai, Ryozo Noguchi, 1994 .

Reaction Force and Posture of a Bunch of Wheat Stalks Undergoing Forced Displacement

Koichi Hashiguchi, Eiji Inoue, Yasumaru Hirai, 2003 .

Modeling of crop stem deflection in the context of combine harvester reel design and operation

Moses Frank Oduori, T. O. Mbuya, Eiji Inoue, 2012 .

Prediction and Evaluation of Vibration Characteristics of an Agricultural Rubber Crawler Vehicle Equipped with Movable Track Rollers

Takashi Fukushima, Eiji Inoue, Muneshi Mitsuoka, 2008 .

Basic studies on vibration characteristics of the rubber crawler system for farm machinery (Part 1). Static transformation characteristics of the rubber crawler to loading forces of track rollers.

Eiji Inoue, Jun Sakai, Shigeki Inaba, 1990 .

Development of a Technique to Reduce Combine Header Losses in Soybeans (Part 2)

Yoshisada Nagasaka, Eiji Inoue, Yutaka Kanetani, 2007 .

Identification of Dynamic Parameters of the Rubber Crawler System for Farm Machinery

Kazushi Nakano, Eiji Inoue, Ryozo Noguchi, 1998 .

Simulation of the Flying Range of Straw Acting the Cleaning Wind

Eiji Inoue, Takashi Okayasu, Matsui Masami, 2006 .

Development of numerical method for improving performance of shaking separator in head-feeding combine harvester

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2008 .

Simulation for Vertical Dynamic Loading Forces on Track Rollers of the Half-tracked Tractor Based on Nonlinear Voigt's Model

Eiji Inoue, Muneshi Mitsuoka, Takeshi Fukushima, 2010 .

Identification of Parameters of the Agricultural Rubber Crawler Vehicle by Using the Measured Dynamic Loading Forces Acting on the Track Rollers

Koichi Hashiguchi, Eiji Inoue, Muneshi Mitsuoka, 2004 .

Development of the Next-Generation Half-Toroidal CVT with Geared Neutral and Power-Split Systems for 450 N-m Engines

Hisashi Machida, Eiji Inoue, Takashi Imanishi, 2004 .

RESEARCH ON THE COMBINE HARVESTER REEL MECHANISM:I. Motion and Configuration of the Slat Reel

Eiji Inoue, Jun Sakai, Moses Frank Oduori, 1991 .

Basic study on noise reduction of agricultural machinery by active noise control.

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2015 .

Analysis of Winnow Mechanism on the Basis of Particle-Particle/Particle-Airflow Interaction (Part 1)

Eiji Inoue, Takashi Okayasu, Masami Matsui, 2008 .

Vibration Characteristics and Modeling of Knife Driving System of Combine Harvester (Part 2)

Takashi Fukushima, Eiji Inoue, Muneshi Mitsuoka, 2006 .

Dynamic Model of an Agricultural Rubber Crawler Vehicle with Nonlinear Spring (Part 1)

Takashi Fukushima, Eiji Inoue, Muneshi Mitsuoka, 2008 .

Development of a remote environmental monitoring and control framework for tropical horticulture and verification of its validity under unstable network connection in rural area

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2016, Comput. Electron. Agric..

Development of a parallel hybrid system for agricultural tractors

Yong-Joo Kim, Eiji Inoue, Takashi Okayasu, 2017 .

Mechanical model on the driving mechanism of combine's cutting section and verification

Eiji Inoue, Muneshi Mitsuoka, Yasumaru Hirai, 2004 .

Development of Design Theory on the Tooth Arrangement and the threshing Drum for a Large-Sized and High-Speed Head-Feeding Combine

Koichi Hashiguchi, Eiji Inoue, Jung Seob Choe, 2000 .

Vibration Model and Evaluation of the Half-Tracked Tractor in Consideration of Rolling Resistance

Takashi Fukushima, Eiji Inoue, Muneshi Mitsuoka, 2006 .

Development of actuation framework for agricultural informatization supporting system

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2013 .

Development of a Technique to Reduce Combine Header Losses in Soybeans (Part 4)

Eiji Inoue, Yutaka Kanetani, Naonobu Umeda, 2008 .

Basic studies on vibration characteristics of the rubber crawler system for farm machinery. Part 4. Vibration characteristics and appraisal of the rubber crawler system for location arrangement of the track rollers.

Eiji Inoue, Jun Sakai, Shigeki Inaba, 1990 .

Shattered Grain Loss Attributable to the Combine Harvester Reel

Moses Frank Oduori, T. O. Mbuya, Eiji Inoue, 2006 .

Basic studies on vibration characteristics of the rubber crawler system for farm machinery. Part 3. Dynamic characteristics between the track roller and rubber crawler.

Eiji Inoue, Jun Sakai, Shigeki Inaba, 1990 .

Development of an Autonomous Weed Mowing Small Robot: -Self-location identification by a tracking laser rangefinder-

Kyoichi Tatsuno, Eiji Inoue, Katsumi Yoshino, 2018 .

Study on the Counting Sensor for Threshing Control

Koichi Hashiguchi, Eiji Inoue, Yasumaru Hirai, 2002 .

Development of a Technique to Reduce Combine Header Losses in Soybeans (Part 3)

Yoshisada Nagasaka, Eiji Inoue, Yutaka Kanetani, 2007 .

Development and Performance Evaluation of a Plant Phenotyping Platform Using Low-cost IoT Devices

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2021, Agricultural Information Research.

Evaluation of a multiple linear regression model for the prediction of panicle number in rice

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2012 .

Using Particle Image Velocimetry to Measure the Wind in a Winnowing Chamber

Eiji Inoue, Matsui Masami, Ken Mori, 2003 .

Evaluation of Strength Distribution on Detachment Force of Paddy Grain

Eiji Inoue, Yasumaru Hirai, 井上英二, 2003 .

Measuring Inclination Angle of Semi–crawler Tractors Using MEMS Sensor

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2013 .

Application of a quasi-static stalk bending analysis to the dynamic response of rice and wheat stalks gathered by a combine harvester reel

Eiji Inoue, Yasumaru Hirai, K. Mori, 2004 .

Investigation of mechanical interaction between a combine harvester reel and crop stalks

Eiji Inoue, Yasumaru Hirai, K. Mori, 2002 .

Lift Resistance of Wheels and Design Theories of Wheel Lugs (Part 1)

Eiji Inoue, Eiji Inoue, Jun Sakai, 1994 .

Judging the abnormalities of agricultural machinery by using Mahalanobis' distance

Tae-Wook Kim, Eiji Inoue, Muneshi Mitsuoka, 2017 .

Lateral slope effect on tipping behavior of a tractor encountering an obstacle (model development)

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2014 .

Frequency response characteristics of rice stalk.

Eiji Inoue, Takashi Okayasu, Yasumaru Hirai, 2000 .

Modification of a Tractor Dynamic Model Considering the Rotatable Front End

Eiji Inoue, Eiji Inoue, Muneshi Mitsuoka, 2015 .

Measurement of 6 Degrees of Freedom Components of Acceleration in Rubber Crawler System

Eiji Inoue, Jun Sakai, Jun Kashima, 1993 .

Characteristics of vibration transmissibility for corrugated paperboard

Eiji Inoue, Takashi Okayasu, Soon-Goo Kwon, 2011 .

Study on the Flying Paddy Acting the Cleaning Wind (Part 2)

Eiji Inoue, Matsui Masami, Ken Mori, 2004 .

Basic Studies on the Dynamic Characteristics of a Riding Tractor with Rotary Tiller (Part 1)

Eiji Inoue, Jun Sakai, Ryozo Noguchi, 1994 .

Dynamic analysis of agricultural wheel tractor driving on uneven surface under the influences of speed and slope angle

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2014 .

Prediction of Tractor Sideslipping Behavior Using a Quasi–static Model

Eiji Inoue, Muneshi Mitsuoka, Takashi Okayasu, 2015 .

Sensor comparison for grass growth estimation

Eiji Inoue, Takashi Okayasu, Sun-Ok Chung, 2016 .

Study on the development of agricultural machines for small-scale farmers (part 1, applied technology for Morocco and Africa)

Eiji Inoue, Koichi Hashiguchi, Hai Sakurai, 2005 .

Reaction Force of a Wheat Stalk Undergoing Forced Displacement

Eiji Inoue, Yasumaru Hirai, Koichi Hashiguchi, 2003 .