Sumin Kim

发表

Evaluation of building energy of wooden houses wite Korean cross-laminate timber using simulation analysis

Seong Jin Chang, Sumin Kim, 2018 .

Two-Stage Optimization for Damage Detection of Trusses

Jaehong Lee, Nam-Il Kim, Sumin Kim, 2017 .

Consideration of Ozone Removal and Control in Built Environment by Building Materials

Sumin Kim, Sumin Kim, S. Jeong, 2012 .

Effect of Bio‐Scavengers on the Curing Behavior and Bonding Properties of Melamine‐Formaldehyde Resins

Heesoo Kim, Sumin Kim, Sumin Kim, 2006 .

Improvement of window thermal performance using aerogel insulation film for building energy saving

Sughwan Kim, Jae-Hun Jo, Junghoon Cha, 2013, Journal of Thermal Analysis and Calorimetry.

Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings

Seunghwan Wi, Yujin Kang, Sumin Kim, 2015 .

Optimization of phase change materials to improve energy performance within thermal comfort range in the South Korean climate

Jae D. Chang, Ji Hun Park, Jongki Lee, 2019, Energy and Buildings.

Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi

Jungki Seo, Junghoon Cha, Sumin Kim, 2012, Journal of Thermal Analysis and Calorimetry.

Enhancement of the thermal conductivity of adhesives for wood flooring using xGnP

Jungki Seo, Junghoon Cha, Sumin Kim, 2012 .

Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity

Seulgi Yu, Sumin Kim, Sumin Kim, 2014 .

Development of a test method using a VOC analyzer to measure VOC emission from adhesives for building materials

Suck-Joong Moon, Sumin Kim, Sumin Kim, 2006 .

Thermal performance enhancement of mortar mixed with octadecane/xGnP SSPCM to save building energy consumption

Sughwan Kim, Sumin Kim, Jeong-Hun Lee, 2014 .

Evaluation of formaldehyde and VOCs emission factors from paints in a small chamber: the effects of preconditioning time and coating weight.

Sumin Kim, Sumin Kim, Hyun-Joong Kim, 2011, Journal of hazardous materials.

Hygrothermal performance improvement of the Korean wood frame walls using macro-packed phase change materials (MPPCM)

Seong Jin Chang, Seunghwan Wi, Yujin Kang, 2017 .

Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings

Sumin Kim, Sumin Kim, S. Jeong, 2015 .

Study on the Characteristics of Thermal Output and Thermal Storage in a Thermally Activated Building System with Phase Change Material

Jin-Hee Song, Seung-Yeong Song, Jae-Han Lim, 2013 .

Test methods and reduction of organic pollutant compound emissions from wood-based building and furniture materials.

Kyung-Won Park, Sumin Kim, Sumin Kim, 2010, Bioresource technology.

Evaluation and analysis of the building energy saving performance by component of wood products using energyPlus

Jungki Seo, Sumin Kim, Seunghwan Wi, 2016 .

Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission.

Sumin Kim, Sumin Kim, 2009, Bioresource technology.

Determination of formaldehyde and TVOC emission factor from wood-based composites by small chamber method

Sumin Kim, Sumin Kim, Hyun-Joong Kim, 2006 .

Control of formaldehyde and TVOC emission from wood-based flooring composites at various manufacturing processes by surface finishing.

Sumin Kim, Sumin Kim, 2010, Journal of hazardous materials.

Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL

Sumin Kim, Sumin Kim, Hyun-Joong Kim, 2006 .

Thermal performance analysis according to wood flooring structure for energy conservation in radiant floor heating systems

Jungki Seo, Jisoo Jeon, Sumin Kim, 2011 .

Numerical analysis of hygrothermal properties and behavior of Korean based cross-laminated timber (CLT) wall system to deduce optimal assemblies

Jongki Lee, Seong Jin Chang, Seunghwan Wi, 2019, Journal of Cleaner Production.

Application of recycled paper sludge and biomass materials in manufacture of green composite pallet

Sumin Kim, Sumin Kim, J. Park, 2009 .

Environment-Friendly Bonding of Decorative Veneer by SIS-Based Hotmelt Pressure-Sensitive Adhesives

Hyeon-Jung Kim, Han-Seung Yang, Sumin Kim, 2006 .

The determination of the adsorption performance of graphite for VOCs and formaldehyde

Sumin Kim, Jeong-Hun Lee, Sumin Kim, 2012 .

Thermal performance evaluation of macro-packed phase change materials (PCMs) using heat transfer analysis device

Seong Jin Chang, Seunghwan Wi, Sumin Kim, 2016 .

Thermal Performance of Wooden Building Envelope by Thermal Conductivity of Structural Members

Seulgi Yu, Sughwan Kim, Sumin Kim, 2013 .

Control of emission rates of chemical compounds emitted by controlling their mass transfer coefficients on the surface of the tested building material

Janghoo Seo, Sumin Kim, Yujin Nam, 2013 .

The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials

Sumin Kim, Sumin Kim, 2009 .

Novel proposal to overcome insulation limitations due to nonlinear structures using 3D printing: Hybrid heat-storage system

Ji Hun Park, Seunghwan Wi, Sungwoong Yang, 2019, Energy and Buildings.

Preparation of Shape Stabilized PCM Using Porous Materials for Application to Buildings

Seulgi Yu, Sumin Kim, Jeong-Hun Lee, 2013 .

Comparison of formaldehyde emission from building finishing materials at various temperatures in under heating system; ONDOL.

Sumin Kim, Sumin Kim, Hyun-Joong Kim, 2005, Indoor air.

Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete

Jisoo Jeon, Junghoon Cha, Sumin Kim, 2013 .

Evaluation of VOC Emissions from Building Finishing Materials Using a Small Chamber and VOC Analyser

Suck-Joong Moon, Sumin Kim, Sumin Kim, 2006 .

Anti-bacterial performance of colloidal silver-treated laminate wood flooring

Sumin Kim, Sumin Kim, Hyun-Joong Kim, 2006 .

Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function

Seong Jin Chang, Seunghwan Wi, Sumin Kim, 2020 .

Emission behavior of formaldehyde and TVOC from engineered flooring in under heating and air circulation systems

Janghoo Seo, Sumin Kim, Janghoo Seo, 2010 .

Design and analysis of phase change material based floor heating system for thermal energy storage.

Seong Jin Chang, Sungwoong Yang, Hyun Mi Cho, 2019, Environmental research.

Thermal performance analysis of phase change materials composed of double layers considering heating and cooling period

Jongki Lee, Seong Jin Chang, Seunghwan Wi, 2019, Journal of Industrial and Engineering Chemistry.

Climatic cycling assessment of red clay/perlite and vermiculite composite PCM for improving thermal inertia in buildings

Ji Hun Park, Seong Jin Chang, Seunghwan Wi, 2020 .

Preparation and Thermal Properties of Octadecane/xGnP Shape-Stabilized Phase Change Materials to Improve the Heat Storage Performance of Buildings

Sughwan Kim, Sumin Kim, Jeong-Hun Lee, 2013 .

Application of PCM thermal energy storage system to reduce building energy consumption

Jungki Seo, Jisoo Jeon, Sumin Kim, 2012, Journal of Thermal Analysis and Calorimetry.

Comparative analysis of the PCM application according to the building type as retrofit system

Ji Hun Park, Jongki Lee, Jisoo Jeon, 2019, Building and Environment.

Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings

Sughwan Kim, Seong Jin Chang, Sumin Kim, 2014 .

High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system

Jungki Seo, Jisoo Jeon, Sumin Kim, 2012 .

Performance evaluation of the microencapsulated PCM for wood-based flooring application

Jungki Seo, Jisoo Jeon, Sumin Kim, 2012 .