Junya Kano

发表

Simultaneous Three-dimensional Analysis of Gas–Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics

Tatsuro Ariyama, Shungo Natsui, Hiroshi Nogami, 2011 .

Sophistication of powder processing by simulation

Junya Kano, 2017 .

Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway

Tatsuro Ariyama, Shungo Natsui, Shigeru Ueda, 2009 .

Optimization of Stirred Mills by a Fusion of Experiment and Computer Simulation

Junya Kano, 2007 .

Useful Computer Simulation and Communication

Junya Kano, 2007 .

Simulation of Operational Power of Co-Axial Double Rotating Cylinders Mill by Particle Element Method

Junya Kano, Fumio Saito, Miyuki Miyazaki, 1999 .

Scale-up method of planetary ball mill

Junya Kano, Fumio Saito, Hiroshi Mio, 2004 .

Estimation of Liner Design in a Tube Mill by Discrete Element Method

Junya Kano, Mitsuhiro Ito, Hiroshi Mio, 2007 .

Analysis on Non‐Uniform Gas Flow in Blast Furnace Based on DEM‐CFD Combined Model

Tatsuro Ariyama, Shungo Natsui, Hiroshi Nogami, 2011 .

Effect of additives on dechlorination of PVC by mechanochemical treatment

Junya Kano, Fumio Saito, Seiichi Masuda, 2001 .

Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Sensitivity Analysis of Physical Parameters in Discrete Element Method Compared with Blast Furnace Cold Model Experiments

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Ball mill simulation in wet grinding using a tumbling mill and its correlation to grinding rate

Junya Kano, Fumio Saito, Hiroto Mori, 2004 .

Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling

Junya Kano, Fumio Saito, Hiroshi Mio, 1999 .

Evaluation of particle density effect for mixing behavior in a rotating drum mixer by DEM simulation

Junya Kano, J. Kano, Shingo Ishihara, 2016 .

A soft-solution process for recovering rare metals from metal/alloy-wastes by grinding and washing with water.

Junya Kano, Fumio Saito, Qiwu Zhang, 2007, Journal of hazardous materials.

Numerical simulation model of the iron ore sintering process directly describing the agglomeration phenomenon of granules in the packed bed

Junya Kano, Eiki Kasai, J. Kano, 2000 .

Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2010 .

Correlation of grinding rate of gibbsite with impact energy in tumbling mill with mono-size balls

Junya Kano, Hiroshi Mio, F. Saito, 2001 .

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2011 .

Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method

Junya Kano, Fumio Saito, Atsuko Shimosaka, 1998 .

Correlation of powder characteristics of talc during Planetary Ball Milling with the impact energy of the balls simulated by the Particle Element Method

Junya Kano, Fumio Saito, J. Kano, 1998 .

Flow Rate and Fluctuation of Wall Pressure During Discharge of Granular Materials from Bin-Hopper System

Junya Kano, Atsuko Shimosaka, Jusuke Hidaka, 1995 .

Flow Mechanism of Granular Materials Discharging from Bin-Hopper System [Translated]†

Junya Kano, Atsuko Shimosaka, Jusuke Hidaka, 1995 .

Analysis of Abrasion Mechanisms of Grinding Media in a Planetary Mill with DEM Simulation

Junya Kano, Fumio Saito, Akira Sato, 2007 .

Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill

Junya Kano, Fumio Saito, Dariusz Gudin, 2007 .

Flow Mechanism of Granular Materials Discharging from Bin-Hopper System.

Junya Kano, Atsuko Shimosaka, Jusuke Hidaka, 1994 .

Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation

Junya Kano, Fumio Saito, Akira Sato, 2010 .

Ball mill simulation and powder characteristics of ground talc in various types of mill

Junya Kano, Fumio Saito, Miyuki Miyazaki, 2000 .

Optimum revolution and rotational directions and their speeds in planetary ball milling

Junya Kano, Fumio Saito, Hiroshi Mio, 2004 .

Simulation of the movement of beads by the DEM with respect to the wet grinding process

Junya Kano, Fumio Saito, Roman Turczyn, 2006 .

Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling

Junya Kano, Fumio Saito, Hiroshi Mio, 2002 .

Grinding of talc particulates by a high-speed rotor mixer

Junya Kano, Fumio Saito, Hiroshi Mio, 2001 .

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2012 .

Analysis of Effect of Pin Configuration on Beads Motion in a Stirred Mill by DEM

Junya Kano, Fumio Saito, J. Kano, 2009 .

Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling.

Junya Kano, Fumio Saito, Takao Nakagawa, 2001 .

Numerical Simulation Model for Granulation Kinetics of Iron Ores Based on Discrete Element Method

Junya Kano, Eiki Kasai, Takazo Kawaguchi, 2006 .