Ryo Inoue

发表

Simultaneous Three-dimensional Analysis of Gas–Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics

Tatsuro Ariyama, Shungo Natsui, Hiroshi Nogami, 2011 .

Research on Quadcopter with Tilt Angle Control Units using Worm Gears

Hiroshi Ohtake, Ryo Inoue, Yuki Hori, 2018 .

Evaluation of Inclusion Characteristics of Clusters and Material in a Clogged Nozzle

Ryo Inoue, Pär Jönsson, Diana Vasiljevic, 2011 .

Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway

Tatsuro Ariyama, Shungo Natsui, Shigeru Ueda, 2009 .

Analysis of the Burden Descending Behavior in an Enlarged Shaft Furnace for Ferro-Coke Production by DEM

Tatsuro Ariyama, Shungo Natsui, Shigeru Ueda, 2014 .

A STUDY ON PLAN CIRCUMSTANCES AND SPACE CHARACTERISTICS OF THE BASIC PARKS IN MIZUSHIMA WELFARE AREA

Ryo Inoue, Shigeo Nakano, Yuki Iwata, 2015 .

Analysis on Non‐Uniform Gas Flow in Blast Furnace Based on DEM‐CFD Combined Model

Tatsuro Ariyama, Shungo Natsui, Hiroshi Nogami, 2011 .

Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Sensitivity Analysis of Physical Parameters in Discrete Element Method Compared with Blast Furnace Cold Model Experiments

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2012 .

Effect of High Reactivity Coke for Mixed Charge in Ore Layer on Reaction Behavior of Each Particle in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2013 .

Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2010 .

Improvement of Reactivity of Carbon Iron Ore Composite with Biomass Char for Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2009 .

Experimental Study and Atomic Level Description of Adsorption Process of CO2 on Doped Alkaline Earth Oxides

Yoshiyuki Kawazoe, Tatsuro Ariyama, Ryo Inoue, 2012 .

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2011 .

Thermodynamics on Control of Inclusions Composition in Ultraclean Steels

Ryo Inoue, R. Inoue, Hideaki Suito, 1996 .

Reaction Model and Reduction Behavior of Carbon Iron Ore Composite in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2009 .

Influence of Blast Furnace Inner Volume on Solid Flow and Stress Distribution by Three Dimensional Discrete Element Method

Tatsuro Ariyama, Ryo Inoue, Satoru Igarashi, 2010 .

Phosphorus Distribution between MgO-saturated CaO-FetO-SiO2-P2O5-MnO Slags and Liquid Iron

Ryo Inoue, R. Inoue, Hideaki Suito, 1984 .

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Calcium desulfurization equilibrium in liquid iron

Ryo Inoue, Hideaki Suito, 1994 .

Phosphorus Distribution between Liquid Iron and MgO Saturated Slags of the System CaO-MgO-FeOx-SiO2

Ryo Inoue, R. Inoue, M. Takada, 1981 .

Thermodynamics of O, N, and S in liquid Fe equilibrated with CaO-AI2O3-MgO slags

Ryo Inoue, R. Inoue, Hideaki Suito, 1994 .

Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2012 .