H. Copur

发表

Development of new empirical models for performance estimation of a raise boring machine

Aydin Shaterpour-Mamaghani, H. Copur, Engin Dogan, 2018 .

Surface settlement predictions for Istanbul Metro tunnels excavated by EPB-TBM

H. Copur, S. G. Ercelebi, I. Ocak, 2011 .

Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

H. Copur, E. Avunduk, H. Copur, 2018 .

Use of Schmidt Hammer with special reference to strength reduction factor related to cleat presence in a coal mine

H. Copur, Cemal Balci, Nuh Bilgin, 2016 .

Field And Laboratory Studies On Performance of Chain Saw Machines

H. Copur, D. Tumac, Cemal Balci, 2010 .

Selection And Design of Mechanical Excavators And Some Recent Projects From Turkey

H. Copur, D. Tumac, Cemal Balci, 2010 .

Rock Mechanics Aspects Related to Cutting Efficiency of Mechanical Excavators, 25 Years of Experience In Istanbul

H. Copur, D. Tumac, Cemal Balci, 2012 .

Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results

H. Copur, Cemal Balci, Nuh Bilgin, 2006 .

Possibility of Using Mechanical Miners in Underground Chromite Mines' Ore Productions and Two Different Examples

H. Copur, Nuh Bilgin, H. Tuncdemir, 2003 .

Estimating torque, thrust and other design parameters of different type TBMs with some criticism to TBMs used in Turkish tunneling projects

H. Copur, Nuh Bilgin, Ugur Ates, 2014 .

Effect of replacing disc cutters with chisel tools on performance of a TBM in difficult ground conditions

H. Copur, Cemal Balci, Nuh Bilgin, 2012 .

Surface settlement prediction for Istanbul metro tunnels via 3D FE and empirical methods

H. Copur, C. Feridunoglu, Nuh Bilgin, 2005 .

A case study on the methane explosion in the excavation chamber of an EPB-TBM and lessons learnt including some recent accidents

H. Copur, Nuh Bilgin, Muammer Cinar, 2011 .

ROADHEADER APPLICATIONS IN MINING AND TUNNELING

Jamal Rostami, H. Copur, L. Ozdemir, 1998 .

Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines

H. Copur, H. Copur, 2010 .

Comparison of Cutting Forces for V-Type Disc Cutter and Performance Prediction of TBM Using Portable Linear Rock Cutting Machine (PLCM)

H. Copur, D. Tumac, Cemal Balci, 2012 .

Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines

H. Copur, D. Tumac, Cemal Balci, 2011 .

The performance prediction of impact hammers from Schmidt hammer rebound values in Istanbul metro tunnel drivages

H. Copur, Nuh Bilgin, T. Dincer, 2002 .

Roadheader applications in mining and tunneling industries

H. Copur, L. Ozdemir, J. Rostami, 2000 .

Difficult ground conditions dictating selection of TBM type in Istanbul

H. Copur, Cemal Balci, Nuh Bilgin, 2016 .

Future tunnelling projects in Istanbul and some considerations for using mechanized tunnelling based on previous experiences

H. Copur, Cemal Balci, Nuh Bilgin, 2013 .

Cutting Performance of Chain Saw and Diamond Wire Machines in Beige Marble Quarry

H. Copur, D. Tumac, Cemal Balci, 2014 .

The selection of a TBM using full scale laboratory tests and comparison of measured and predicted performance values in Istanbul Kozyatagi-Kadikoy metro tunnels

H. Copur, D. Tumac, Cemal Balci, 2008 .

Importance of physical-mechanical properties of rocks for application of a raise boring machine

Aydin Shaterpour-Mamaghani, H. Copur, Engin Dogan, 2019 .

Experimental Comparison of Single and Double Scroll Cutting Patterns by using Chisel Cutting to ols of Chain Saw Machines

H. Copur, D. Tumac, Cemal Balci, 2013 .

A methodology of using past experiences in the performance prediction of a TBM in a complex geology

H. Copur, Cemal Balci, Nuh Bilgin, 2013 .

Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model

H. Copur, D. Tumac, Cemal Balci, 2014 .

Full-Scale Linear Cutting Experiments With a Conical Cutter for Simulating Different Cutting Patterns

H. Copur, D. Tumac, Cemal Balci, 2016 .

Estimation of the Performance of Chain Saw Machines from Shore Hardness and the Other Mechanical Properties

H. Copur, D. Tumac, Cemal Balci, 2013 .