Wei Wang

发表

Drying of Porous Materials: From a general mathematical model to specific applications, Keynote lecture

Guohua Chen, Wei Wang, 2010 .

Experimental and FEA Studies of a New Type SMA Viscous Damper

Wei Wang, Ying Chun Tang, Wei Kai Xu, 2013 .

Finite Element Model for Cracked Beams with Bonded Piezoelectric Transducers

Wei Wang, Wei Yan, Wan Chun Li, 2011 .

Analysis of Tunnel Defect Characteristic Caused by Cavities behind Lining

Peng Ding, Wei Wang, Shi Chao Liao, 2011 .

An engineering model and its numerical validation for a malevolent aircraft impinging against a rigid target: Force and impulse estimations

Wei Wang, Tieping Li, Fuping Yuan, 2019 .

Research on the Opportunity of Construction Method Conversion in Upper-Soft and Lower-Hard Stratum Based on Pressure Arch Theory

Wei Wang, Hengwen Zhang, Jiasheng Bian, 2017 .

The Vibration Control Research of Steel Frame Structure with Shape Memory Alloy (SMA) Cables

Wei Wang, Wei Kai Xu, Dong Wei Zhang, 2013 .

Seismic performance of floor-by-floor assembled steel braced structures with stiffened connections

Yiyi Chen, Wei Wang, Qing Zhou, 2013 .

Contrastive Finite Analysis of SRC Frame under Cyclic Loading Base on Macroscopic and Microscopic Element

Wei Wang, Shan Suo Zheng, Pi Ji Hou, 2012 .

Component Seismic Damage Model for SRHSHPC Joints

Wei Wang, Shan Suo Zheng, Lei Li, 2009 .

Hyperbolic Distribution of All-Wheel Independent Braking Force for Cornering Vehicle

Xuefei Ji, Wei Wang, Lin He, 2013 .

Simulation Model to Predict Failure Cycles in Board Level Drop Test

Wei Wang, Daniel Robbins, Christopher Glancey, 2016, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC).

Damage Detection in a Cracked Rod Using High-Frequency Electro-Mechanical Impedance Signatures

Wei Wang, Wei Yan, Wan Chun Li, 2012 .

Dynamic reliability analysis of a cantilever beam during a deterioration process

Yimin Zhang, Changyou Li, Hao Wang, 2018, Mechanics Based Design of Structures and Machines.

Experimental and numerical investigation on full-scale tension-only concentrically braced steel beam-through frames

Tak-Ming Chan, Yiyi Chen, Wei Wang, 2013 .

The Finite Element Analysis of Modular Hole of the Lateral Longitudinal Beam in the Power Protection Cabinets

Wei Wang, Hui Dou, Yan Jie Guo, 2014 .

Finite Element Model for Damage Detection in Three-Dimensional Cube Structures

Wei Wang, Wei Yan, Wan Chun Li, 2012 .

The Influence of near-Fault Ground Motions on the Seismic Response of Reinforced Concrete Frame

Wei Wang, Hu Wang, Chang Hao Zhang, 2011 .

The effect of actuator parameters on the critical flow velocity of a fluidic amplifier

He Liu, Wei Wang, Guo-lin Li, 2013 .

HJ-1A Hyper-spectral Remote Sensing Alteration Information Extraction and Analysis

Wei Zhao, Wei Wang, Kefa Zhou, 2018 .

Stochastic Damage Constitutive Model for Concrete Subjected to Uniaxial Tension Stress

Wei Wang, Shan Suo Zheng, Lei Li, 2009 .

Finite Element EMI Model for Cracked Portal Frame and Parameter Study

Wei Wang, Wei Yan, Wan Chun Li, 2012 .

9-12Cr Heat-Resistant Steels

Wei Yan, Wei Sha, Wei Wang, 2015 .

Numerical Investigation on Dielectric Material Assisted Microwave Freeze-Drying of Aqueous Mannitol Solution

Guohua Chen, Wei Wang, Guohua Chen, 2003 .

Microstructural Evolution and Mechanical Properties of Short-Term Thermally Exposed 9/12Cr Heat-Resistant Steels

Wei Yan, Wei Sha, Wei Wang, 2012, Metallurgical and Materials Transactions A.

Numerical investigation on VIV suppression of marine riser with triangle groove strips attached on its surface

Wei Wang, Baowei Song, Wenlong Tian, 2019, International Journal of Naval Architecture and Ocean Engineering.

Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels

Wei Yan, Wei Sha, Wei Wang, 2014 .

Nonlinear dynamic analysis for machine tool table system mounted on linear guides

Changyou Li, Wei Wang, Hao Wang, 2018, Nonlinear Dynamics.

Microstructural stability of 9–12%Cr ferrite/martensite heat-resistant steels

Wei Yan, Wei Wang, Ke Yang, 2013, Frontiers of Materials Science.

The impact toughness of a nitride-strengthened martensitic heat resistant steel

Wei Sha, Wei Wang, Ke Yang, 2012 .

Constitutive Modeling, Microstructure Evolution, and Processing Map for a Nitride-Strengthened Heat-Resistant Steel

Wei Sha, Wei Wang, Ke Yang, 2014, Journal of Materials Engineering and Performance.

Experimental Research on Force Transmission of Dense Granular Assembly Under Shearing in Taylor–Couette Geometry

Wei Wang, Kun Liu, Wei Wang, 2012, Tribology Letters.

Microstructure and Mechanical Properties of a Nitride-Strengthened Reduced Activation Ferritic/Martensitic Steel

Wei Yan, Wei Sha, Wei Wang, 2012, Metallurgical and Materials Transactions A.

Deflection detection and curve fitting in three-roll continuous straightening process for LSAW pipes

Wei Wang, Gaochao Yu, Chunge Wang, 2018 .

Study on Laves phase in an advanced heat-resistant steel

Wei Yan, Wei Sha, Wei Wang, 2009 .

Evolution of microstructure and changes of mechanical properties of CLAM steel after long-term aging

Wei Yan, Wei Sha, Wei Wang, 2013 .

Surface observations of a powder layer during the damage process under particulate lubrication

Wei Wang, Kun Liu, Wei Wang, 2013 .

Heat and mass transfer model of dielectric-material-assisted microwave freeze-drying of skim milk with hygroscopic effect

Guohua Chen, Wei Wang, Guohua Chen, 2005 .

Microstructure Evolution of a 10Cr Heat-Resistant Steel during High Temperature Creep

Wei Yan, Wei Sha, Wei Wang, 2011 .

Effect of Carbon Reduction on the Toughness of 9CrWVTaN Steels

Wei Yan, Wei Sha, Wei Wang, 2012, Metallurgical and Materials Transactions A.

Theoretical Study on Microwave Freeze-Drying of an Aqueous Pharmaceutical Excipient with the Aid of Dielectric Material

Guohua Chen, Wei Wang, Guohua Chen, 2005 .

Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials

Wei Wang, Yibao Li, Wei Wang, 2013 .