Joseph C. Slater

发表

Accurate Strain Gage Limits Through Geometry Mistuning Modeling

Daniel L. Gillaugh, Alexander A. Kaszynski, Jeffrey M. Brown, 2017 .

Proper Modes for Modeling Flapping Dynamics of Ornithopters

David B. Doman, Joseph C. Slater, D. Doman, 2012 .

Combination of radar and audio sensors for identification of rotor-type Unmanned Aerial Vehicles (UAVs)

John C. Gallagher, Eric T. Matson, Yongho Kim, 2015, 2015 IEEE SENSORS.

Improved Structural Damage Identification Using Random Decrement Signatures: Application to FEM Data

Joseph C. Slater, Oleg V. Shiryayev, 2008 .

Development and Test of a Rigidizable Inflatable Structure Experiment

Wright-Patterson Afb, Richard G. Cobb, Joseph C. Slater, 2004 .

A Fleet Risk Prediction Methodology for Mistuned IBRs using Geometric Mistuning Models

Jeffrey M. Brown, Joseph C. Slater, Emily B. Henry, 2015 .

Application of the Random Decrement Technique to a Nonlinear Dynamic System

Joseph C. Slater, Oleg V. Shiryayev, 2006 .

Sensitivity Studies of Nonlinear Vibration Features For Detection of Cracks in Turbomachinery Components

Joseph C. Slater, Oleg V. Shiryayev, 2010 .

Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning Methods

Joseph A. Beck, Jeffrey M. Brown, Joseph C. Slater, 2012 .

Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning Methods

Joseph A. Beck, Jeffrey M. Brown, Joseph C. Slater, 2013 .

Panel Flutter Model Identification Using the Minimum Model Error Method. Part 2: Forced Response

Joseph C. Slater, Oleg V. Shiryayev, J. Slater, 2004 .

Experimental Investigation of a Perturbation Model for the Nonlinear Response of a Fatigue Cracked Beam

Joseph C. Slater, Oleg V. Shiryayev, Phillip E. Cooley, 2014 .

Minimizing sensitivity of bladed disks to mistuning

Joseph C. Slater, A. J. Blair, J. Slater, 1998 .

Forced response of bladed disk assemblies : A survey

Joseph C. Slater, Gregory Minkiewicz, Andrew Blair, 1999 .

Design of a Flapping Quad-Winged Micro Air Vehicle

Joseph C. Slater, Haibo Dong, Brian Nicholson, 2007 .

Dynamic response characteristics of dual flow-path integrally bladed rotors

Joseph A. Beck, Jeffrey M. Brown, Joseph C. Slater, 2015 .

Parameter estimation and investigation of a bolted joint model

Joseph C. Slater, Chris L. Pettit, Oleg V. Shiryayev, 2007 .

Strain Gage Ramifications on Mistuning in As-Manufactured Models and Experimental Testing

Joseph A. Beck, Daniel L. Gillaugh, Alexander A. Kaszynski, 2019, Journal of Engineering for Gas Turbines and Power.

Improved Structural Damage Identification Using Random Decrement Signatures: Application to FEM Data

Joseph C. Slater, Oleg V. Shiryayev, 2007 .

Detection of Fatigue Cracks Using Random Decrement Signatures

Joseph C. Slater, Oleg V. Shiryayev, 2010 .

Structural Damage Identification Using Random Decrement Signatures from Experimental Data

Joseph C. Slater, Oleg V. Shiryayev, 2008 .

An Integrated Interdisciplinary Technology Project In Undergraduate Engineering Education

Joseph C. Slater, Kumar Yelamarthi, Zhiqiang Wu, 2007 .

Active/passive controller synthesis based on Hinfinity power flow techniques

Donald J. Leo, Joseph C. Slater, 1995, Smart Structures.

AC 2007-796: AN INTEGRATED INTERDISCIPLINARY TECHNOLOGY PROJECT IN UNDERGRADUATE ENGINEERING EDUCATION

Joseph C. Slater, Kumar Yelamarthi, Tau Beta, 2007 .

Mistuned Response Prediction of Dual Flow-Path Integrally Bladed Rotors With Geometric Mistuning

Joseph A. Beck, Jeffrey M. Brown, Alexander A. Kaszynski, 2015 .

Control Of Resonant Fatigue Tests In The Existence Of Bifurcations

Joseph C. Slater, Oleg V. Shiryayev, Charles Cross, 2003 .

Fatigue Crack Modeling and Analysis in Beams

Joseph C. Slater, Oleg V. Shiryayev, Phillip E. Cooley, 2012 .

A proper orthogonal decomposition technique for the computation of nonlinear panel response

Joseph C. Slater, Philip S. Beran, Sean A. Mortara, 2000 .

A Comparison of Conventional and Impedance Methods for Modeling Piezoelectric Materials Actuation in Smart Structures

Joseph C. Slater, Y. Wang, J. Slater, 1998 .

Investigation of Candidate Features For Crack Detection in Fan and Turbine Blades and Disks

Joseph C. Slater, Oleg V. Shiryayev, Michelle Meier, 2009 .

Application of the Campbell Diagram Concept to Identication of Fatigue Cracks in Bladed Disk Assemblies

Joseph C. Slater, Oleg V. Shiryayev, Phillip E. Cooley, 2011 .

Supplemental Investigations on Structural Damage Detection Using Randomdec Signatures from Experimental Data

Joseph C. Slater, Oleg V. Shiryayev, 2009 .

Engineering Management In An Interdisciplinary Senior Design Project

Joseph C. Slater, Kumar Yelamarthi, P. Ruby Mawasha, 2014 .

Active-passive controller synthesis based on H power flow techniques *

Joseph C. Slater, 2017 .

Strain Gage Ramifications on Mistuning in As-Manufactured Models and Experimental Testing

Joseph A. Beck, Jeffrey M. Brown, Daniel L. Gillaugh, 2019 .

Making Math And Science Exciting Through Engineering Sport: The Wright State University Trebuchet Competition

Joseph C. Slater, 2008 .

Material Property Determination of Vibration Fatigued DMLS and Cold-Rolled Nickel Alloys

Joseph A. Beck, Joseph C. Slater, M.-H. Herman Shen, 2014 .

In-situ residual tracking in reduced order modelling

Joseph C. Slater, Chris L. Pettit, Philip S. Beran, 2002 .

Mistuning Evaluation Comparison Via As-Manufactured Models, Traveling Wave Excitation, and Compressor Rigs

Joseph A. Beck, Daniel L. Gillaugh, Alexander A. Kaszynski, 2018, Journal of Engineering for Gas Turbines and Power.

ON THE EFFECT OF WEAK NON-LINEARITIES ON LINEAR CONTROLLABILITY AND OBSERVABILITY NORMS, AN INVARIANT MANIFOLD APPROACH

Daniel J. Inman, Joseph C. Slater, 1997 .

Approximation and parameter identification for damped second order systems with unbounded input operators

Daniel J. Inman, Harvey Thomas Banks, Joseph C. Slater, 1993 .

Feasibility of Using Nonlinear Response Features for Crack Detection in Turbomachinery Components

Joseph C. Slater, Oleg V. Shiryayev, J. Slater, 2013 .

A numerical method for determining nonlinear normal modes

Joseph C. Slater, J. Slater, 1996 .

Component-Mode Reduced-Order Models for Geometric Mistuning of Integrally Bladed Rotors

Joseph A. Beck, Joseph C. Slater, Charles Cross, 2013 .

Accurate Strain Gauge Limits Through Geometry Mistuning Modeling

Daniel L. Gillaugh, Alexander A. Kaszynski, David A. Johnston, 2018, Journal of Propulsion and Power.

Measurements and Modeling of Variability in the Dynamics of a Bolted Joint

Wright-Patterson Afb, Joseph C. Slater, Chris L. Pettit, 2004 .

Forced response of bladed disk assemblies - A survey

Joseph C. Slater, Gregory Minkiewicz, Andrew Blair, 1998 .

Analysis of Nonlinear Aeroelastic Panel Response Using Proper Orthogonal Decomposition

Joseph C. Slater, Philip S. Beran, Sean A. Mortara, 2004 .

Geometric Mistuning Reduced-Order Models for Integrally Bladed Rotors With Mistuned Disk–Blade Boundaries

Joseph A. Beck, Joseph C. Slater, Charles Cross, 2015 .

Survey of modern methods for modeling frequency dependent damping in finite element models

Daniel J. Inman, W. Keith Belvin, Joseph C. Slater, 1993 .

Variable coefficient distributed parameters system models for structures with piezoceramic actuators and sensors

Daniel J. Inman, Harvey Thomas Banks, Joseph C. Slater, 1992, [1992] Proceedings of the 31st IEEE Conference on Decision and Control.

Dynamic Response Characteristics of Dual Flow-Path Integrally Bladed Rotors

Joseph A. Beck, Joseph C. Slater, Charles Cross, 2014 .

Inverse dynamic design technique for model correction and optimization

Mark J. Schulz, Joseph C. Slater, Sunil K. Thyagarajan, 1995 .

Aeroelastic System Identification Using the Minimum Model Error Method

Joseph C. Slater, Oleg V. Shiryayev, J. Slater, 2006 .