J. F. Booker

发表

Dynamics of offset journal bearings — revisited

Stephen Boedo, J. F. Booker, 2009 .

A Mode-Based Elastohydrodynamic Lubrication Model With Elastic Journal and Sleeve

Stephen Boedo, J. F. Booker, 2000 .

Dynamically loaded journal bearings: a modal approach to EHL design analysis

J. F. Booker, A. Kumar, P. K. Goenka, 1989 .

Discussion: “Systems of Finite Elements for Finite Bearings” (Allaire, P. E., Nicholas, J. C., and Gunter, E. J., 1977, ASME J. Lubr. Technol., 99, pp. 187–194)

J. F. Booker, 1977 .

Dynamically-Loaded Journal Bearings: Numerical Application of the Mobility Method

J. F. Booker, J. Booker, 1971 .

Discussion: “Oil Whip Whirl Orbits of a Rotor in Sleeve Bearings” (Lund, J. W., and Saibel, E., 1967, ASME J. Eng. Ind., 89, pp. 813–823)

J. F. Booker, 1967 .

Dynamics of Offset Bearings: Parametric Studies

J. F. Booker, P. Olikara, 1984 .

Rigid-Body Rotor Dynamics: Dynamic Unbalance and Lubricant Temperature Changes

J. F. Booker, R. H. Badgley, 1970 .

Paper IV (i) Feed Pressure Flow in Connecting Rod Bearings

J. F. Booker, S. Boedo, 1991 .

Paper III (ii) Mass-Conservative Design Analysis for Engine Bearings

J. F. Booker, A. Kumar, 1991 .

Mode Stiffness Variation in Elastohydrodynamic Bearing Design

Stephen Boedo, J. F. Booker, 1997 .

Discussion: “Analytical Curve Fits for Solution Parameters of Dynamically Loaded Journal Bearings” (Goenka, P. K., 1984, ASME J. Tribol., 106, pp. 421–427)

J. F. Booker, S. Govindachar, 1984 .

Erratum: “Application of Finite Element Methods to Lubrication: An Engineering Approach” (Journal of Lubrication Technology, 1972, 94, pp. 313–323)

J. F. Booker, K. H. Huebner, 1976 .

SPHERICAL VS CYLINDRICAL ENGINE BEARINGS

Stephen Boedo, J. F. Booker, 2007 .

Hydrodynamic Analysis of Journal Bearings with Structural Inertia and Elasticity by a Modal Finite Element Method

J. F. Booker, E. G. Olson, J. Booker, 1997 .

Session XX engine tribology (2)

J. F. Booker, Hongming Xu, Martin Priest, 2002 .

Swing Phase Lubrication Analysis of a Novel Artificial Hip Joint

Stephen Boedo, J. F. Booker, S. A. Coots, 2013 .

Dynamically Loaded Journal Bearings: Mobility Method of Solution

J. F. Booker, 1965 .

Erratum: “Warner–Sommerfeld Impedance and Mobility Maps” [ASME J. Tribol., 2016, 138(3), p. 034502; DOI: 10.1115/1.4031753]

J. F. Booker, S. Boedo, 2017 .

Discussion: “On the Natural Lubrication of Synovial Joints: Normal and Degenerate” (Mansour, Joseph M., and Mow, Van C., 1977, ASME J. Lubr. Technol., 99, pp. 163–172)

J. F. Booker, 1977 .

Transient dynamics of engine bearing systems

J. F. Booker, Stephen Boedo, 1989 .

Summary 1: The Influence of Engine Component Inertia Forces on Minimum Oil Film Thickness in Connecting Rod Big-End Bearings

J. F. Booker, F. A. Martin, 1966 .

Discussion: “Journal Bearing Impedance Descriptions for Rotordynamic Applications” (Childs, D., Moes, H., and van Leeuwen, H., 1977, ASME J. Lubr. Technol., 99, pp. 198–210)

J. F. Booker, 1977 .

EHD Analysis With Distributed Structural Inertia

J. F. Booker, E. G. Olson, 2001 .

Erratum: “Mobility/Impedance Methods: A Guide for Application” [ASME J. Tribol., 2014, 136(2), p. 024501; DOI: 10.1115/1.4025760]

J. F. Booker, 2019 .

Discussion: “Analysis of Dynamically Loaded Floating-Ring Bearings for Automotive Applications” (Rohde, Steve M., and Ezzat, Hazem A., 1980, ASME J. Lubr. Technol., 102, pp. 271–276)

J. F. Booker, 1980 .

A Finite Element Cavitation Algorithm: Application/Validation

J. F. Booker, A. Kumar, 1991 .

Closure to “Discussions of ‘Dynamically Loaded Journal Bearings: A Finite Element Treatment for Rigid and Elastic Surfaces’” (1985, ASME J. Tribol., 107, pp. 513–514)

J. F. Booker, G. A. LaBouff, 1985 .

Modal and Nodal EHD Analysis for Gas Journal Bearings

Stephen Boedo, J. F. Booker, 2005 .

DYNAMIC ANALYSIS OF ENGINE BEARING SYSTEMS

J. F. Booker, W. A. Welsh, 1983 .

Additional Comments on Dynamic Analysis of Rocking Journal Bearings With Multiple Offset Segments

J. F. Booker, P. K. Goenka, H. J. van Leeuwen, 1982 .

Modal Analysis of Elastohydrodynamic Lubrication: A Connecting Rod Application

J. F. Booker, A. Kumar, P. K. Goenka, 1990 .

Cavitation in Normal Separation of Square and Circular Plates

Stephen Boedo, J. F. Booker, 1995 .

Paper II(ii) – Dynamic analysis of engine bearing systems

J. F. Booker, W. A. Welsh, 1993 .

A Finite Element Cavitation Algorithm

J. F. Booker, A. Kumar, J. Booker, 1991 .

Closure to “Discussion of ‘Rigid-Body Rotor Dynamics: Dynamic Unbalance and Lubricant Temperature Changes’” (1970, ASME J. Lubr. Technol., 92, p. 421)

J. F. Booker, R. H. Badgley, 1970 .

Addendum: “Dynamic Analysis of Rocking Journal Bearings with Multiple Offset Segments” (ASME Journal of Lubrication Technology, 1982, 104, pp. 478–490)

J. F. Booker, P. K. Goenka, H. J. van Leeuwen, 1983 .

Discussion: “Full Journal Bearings Under Dynamic Duty: Impulse Method of Solution and Flapping Action” (Blok, H., 1975, ASME J. Lubr. Technol., 97, pp. 168–178)

J. F. Booker, 1975 .

Mobility/Impedance Methods: A Guide for Application

J. F. Booker, 2014 .

Erratum: “Dynamically-Loaded Journal Bearings: Numerical Application of the Mobility Method” (Journal of Lubrication Technology, 1971, 93, pp. 168–176)

J. F. Booker, 1971 .

Dynamically Loaded Journal Bearings: A Finite Element Treatment for Rigid and Elastic Surfaces

J. F. Booker, G. A. LaBouff, 1985 .

Influence of Engine Inertia Forces on Minimum Film Thickness in Con-Rod Big-End Bearings

J. F. Booker, F. A. Martin, 1966 .

Closure to “Discussions of ‘Effect of Surface Ellipticity on Dynamically Loaded Cylindrical Bearings’” (1983, ASME J. Lubr. Technol., 105, pp. 10–11)

J. F. Booker, P. K. Goenka, 1983 .

Discussion: “Measurement of the Journal Locus in the Con-Rod Big-End Bearing of an Automobile Gasoline Engine” (Hiruma, M., and Furuhama, S., 1973, ASME J. Lubr. Technol., 95, pp. 249–254)

J. F. Booker, A. C. Stickler, 1973 .

Classical Bearing Misalignment and Edge Loading: A Numerical Study of Limiting Cases

Stephen Boedo, J. F. Booker, J. Booker, 2004 .

A Table of the Journal-Bearing Integral

J. F. Booker, J. Booker, 1965 .

Elastohydrodynamic Squeeze Films: Effects of Viscoelasticity and Fluctuating Load

J. F. Booker, D. Whicker, S. M. Rohde, 1979 .

Application of Finite Element Methods to Lubrication: An Engineering Approach

J. F. Booker, K. H. Huebner, J. Booker, 1972 .

A Mass and Energy Conserving Finite Element Lubrication Algorithm

J. F. Booker, A. Kumar, J. Booker, 1994 .

Surface Roughness and Structural Inertia in a Mode-Based Mass-Conserving Elastohydrodynamic Lubrication Model

Stephen Boedo, J. F. Booker, J. Booker, 1997 .

The use of higher order finite element methods for the solution of Reynolds' equation. Discussion

J. F. Booker, C. M. Ettles, H. G. Anderson, 1990 .

A mass conserving modal analysis for elastohydrodynamic lubrication

Stephen Boedo, J. F. Booker, M. J. Wilkie, 1995 .

Warner–Sommerfeld Impedance and Mobility Maps

Stephen Boedo, J. F. Booker, J. Booker, 2016 .

Closure to “Discussions of ‘Dynamic Analysis of Rocking Journal Bearings With Multiple Offset Segments’” (1982, ASME J. Lubr. Technol., 104, pp. 487–490)

J. F. Booker, P. K. Goenka, H. J. van Leeuwen, 1982 .

Design of Film Bearings

J. F. Booker, P. R. Trumpler, 1966 .

Effect of Surface Ellipticity on Dynamically Loaded Cylindrical Bearings

J. F. Booker, P. K. Goenka, 1983 .

Basic Equations for Fluid Films with Variable Properties

J. F. Booker, 1989 .

Finite element analysis of elastic engine bearing lubrication: theory

Stephen Boedo, J. F. Booker, J. Booker, 2001 .

Turborotor Instability: Effect of Initial Transients on Plane Motion

J. F. Booker, R. H. Badgley, 1969 .

Spherical Bearings: Static and Dynamic Analysis Via the Finite Element Method

J. F. Booker, P. K. Goenka, 1980 .