Christophe Lanos

发表

Verification at Serviceability Limit State (SLS)

Noël Challamel, Charles Casandjian, Christophe Lanos, 2013 .

Particle Fluid Separation in Shear Flow of Dense Suspensions: Experimental Measurements on Squeezed Clay Pastes

Nicolas Roussel, Christophe Lanos, 2004 .

Chapter 4: Formulation and implementation

Christophe Lanos, Florence Collet, Gérard Lenain, 2013 .

Formulation and Implementation

Christophe Lanos, Gérard Lenain, Yves Hustache, 2013 .

The Back Extrusion Test as a Technique for Determining the Rheological and Tribological Behaviour of Yield Stress Fluids at Low Shear Rates

Christophe Lanos, Patrice Estellé, Damien Rangeard, 2011 .

Influence of hysteresis on the transient hygrothermal response of a hemp concrete wall

Christophe Lanos, Florence Collet, Marjorie Bart, 2017 .

Extension of Spread-Slump Formulae for Yield Stress Evaluation

Christophe Lanos, Patrice Estellé, Alexandre Pierre, 2013 .

High Torque Vane Rheometer for Concrete: Principle and Validation from Rheological Measurements

Christophe Lanos, Patrice Estellé, C. Lanos, 2012 .

Design at Serviceability Limit State (SLS)

Noël Challamel, Charles Casandjian, Christophe Lanos, 2013 .

On the optimisation of a texture analyser in squeeze flow geometry

Christophe Lanos, Patrice Estellé, Colin Servais, 2006 .

One-Dimensional-Time Study of the Dehydration of Plasterboards Under Standard Fire Condition (ISO 834): Thermo-Chemical Analysis

Christophe Lanos, Carole Daiguebonne, Olivier Guillou, 2011 .

Extrusion Criterion for Firm Cement-based Materials

Christophe Lanos, Patrice Estellé, Damien Rangeard, 2008 .

A review of thermomechanical properties of lightweight concrete

Christophe Lanos, Annabelle Phelipot-Mardelé, Gabriel Samson, 2017 .

Comparison of the hygric behaviour of three hemp concretes

Christophe Lanos, Florence Collet, Sylvie Pretot, 2013 .

Remontée d'un anneau de voussoir : modélisation et analyse paramétrique

Christophe Lanos, N. Roussel, Zahia Toutou, 2003 .

Induced heterogeneity in saturated flowing granular media

Christophe Lanos, Yannick Mélinge, Y. Mélinge, 2003 .

Couette Rheometry from Differential Approach: Comparative Study and Experimental Application

Christophe Lanos, Patrice Estellé, Arnaud Perrot, 2008 .

Behaviour of Fire-Proofing Materials Containing Gypsum, Modifications Induced by Incorporation of Inert Filler

Christophe Lanos, Yannick Mélinge, Y. Mélinge, 2003 .

Stability analysis of dynamic ratcheting in elastoplastic systems.

Noël Challamel, Christophe Lanos, N. Challamel, 2007, Physical review. E, Statistical, nonlinear, and soft matter physics.

Bending‐Curvature at Ultimate Limit State (ULS)

Noël Challamel, Charles Casandjian, Christophe Lanos, 2013 .

Hysteretic Behaviour and Moisture Buffering of Hemp Concrete

Christophe Lanos, Marjorie Bart, Yacine Aït Oumeziane, 2014, Transport in Porous Media.

Localization in the buckling or in the vibration of a two-span weakened column

Noël Challamel, Charles Casandjian, Christophe Lanos, 2006 .

EXPERIMENTAL AND NUMERICAL EVALUATION OF THE HYGROTHERMAL PERFORMANCE OF A HEMP-LIME BUILDING

Bassam Moujalled, Christophe Lanos, Marjorie Bart, 2015 .

Processing the Vane Shear Flow Data from Couette Analogy

Christophe Lanos, Sofiane Amziane, Patrice Estellé, 2008 .

The squeezing test: a tool to identify firm cement-based material's rheological behaviour and evaluate their extrusion ability

Christophe Lanos, Nicolas Roussel, C. Lanos, 2005 .

Strain-based anisotropic damage modelling and unilateral effects

Noël Challamel, Charles Casandjian, Christophe Lanos, 2005 .

Creep Failure in Concrete as a Bifurcation Phenomenon

Noël Challamel, Charles Casandjian, Christophe Lanos, 2005 .

SQUEEZING FLOW FOR RHEOLOGICAL CHARACTERISATION OF FOOD MATERIALS

Christophe Lanos, Patrice Estellé, Colin Servais, 2003 .

The extrusion of a model yield stress fluid imaged by MRI velocimetry

Philippe Coussot, François Bertrand, Christophe Lanos, 2010 .

Mortar physical properties evolution in extrusion flow

Christophe Lanos, Patrice Estellé, Arnaud Perrot, 2007 .

Ram extrusion force for a frictional plastic material: model prediction and application to cement paste

Christophe Lanos, Patrice Estellé, Arnaud Perrot, 2006 .

Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate

Christophe Lanos, Patrice Estellé, Damien Rangeard, 2012, Rheologica Acta.

Enhanced Gypsum Panels for Fire Protection

Christophe Lanos, Yannick Mélinge, Raoul Jauberthie, 2008 .

Identification of Bingham fluid flow parameters using a simple squeeze test

Christophe Lanos, Nicolas Roussel, C. Lanos, 2006 .

Processing the vane shear flow data from Couette analogy

Christophe Lanos, Sofiane Amziane, Patrice Estellé, 2008 .

Slipping zone location in squeeze flow

Christophe Lanos, Patrice Estellé, Arnaud Perrot, 2006 .

Plastic Fluid Flow Parameters Identification Using a Simple Squeezing Test

Christophe Lanos, Nicolas Roussel, C. Lanos, 2003 .

Processing the Couette viscometry data using a Bingham approximation in shear rate calculation

Christophe Lanos, Patrice Estellé, Arnaud Perrot, 2008 .

Shear flow curve in mixing systems—A simplified approach

Christophe Lanos, Patrice Estellé, C. Lanos, 2008 .

Creep damage modelling for quasi-brittle materials

Noël Challamel, Charles Casandjian, Christophe Lanos, 2005 .

Localization in the Vibration of an Axially Loaded Two-span Weakened Column

Noël Challamel, Charles Casandjian, Christophe Lanos, 2009 .

Induced non Homogeneity in a Saturated Granular Media Submitted to Slow Shearing

Christophe Lanos, Nicolas Roussel, Yannick Mélinge, 2002 .

Thermal and mechanical properties of gypsum–cement foam concrete: effects of surfactant

Christophe Lanos, Annabelle Phelipot-Mardelé, Gabriel Samson, 2016 .