Jacek Smolka

发表

Efektywne chłodzenie cewek suchego transformatora elektrycznego za pomocą kanałów chłodzących o optymalnej konfiguracji

Jacek Smolka, Andrzej J. Nowak, 2011 .

An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem

Jacek Smolka, Andrzej J. Nowak, Iwona Nowak, 2010 .

Full-scale multi-ejector module for a carbon dioxide supermarket refrigeration system: Numerical study of performance evaluation

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2017 .

CFD-based shape optimisation of a CO2 two-phase ejector mixing section

Waclaw Kus, Armin Hafner, Zbigniew Bulinski, 2016 .

A modified homogeneous relaxation model for CO2 two-phase flow in vapour ejector

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2016 .

Heat dissipation within electrical switchgear enclosure

Zbigniew Bulinski, Jacek Smolka, Andrzej J. Nowak, 2014 .

Analiza nieustalonych procesów cieplnych w kanałach grzewczych baterii koksowniczej w odpowiedzi na skokową zmianę warunków brzegowych

Jacek Smolka, Andrzej J. Nowak, Anna M. Fic, 2011 .

Shape optimisation of a two-phase ejector for CO2 refrigeration systems

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2017 .

2.5-D multilayer optimisation of an industrial switchgear busbar system

Zbigniew Bulinski, Jacek Smolka, M. Bedkowski, 2016 .

Modyfikacja konfiguracji cewek suchego transformatora elektrycznego w celu obniżenia temperatury najgorętszego miejsca

Jacek Smolka, Andrzej J. Nowak, Andrzej J. Nowak, 2011 .

Parallel Work of CO2 Ejectors Installed in a Multi-Ejector Module of Refrigeration System

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2016 .

Odtwarzanie kształtu obszaru w trójwymiarowym modelu ciągłego odlewania stopu aluminium

Jacek Smolka, Andrzej J. Nowak, Iwona Nowak, 2010 .

Numerical Simulation and Experimental Validation of Coupled Flow, Heat Transfer and Electromagnetic Problems in Electrical Transformers

Jacek Smolka, Andrzej J. Nowak, Oszkár Bíró, 2009 .

Performance of fixed geometry ejectors with a swirl motion installed in a multi-ejector module of a CO2 refrigeration system

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2016 .

Odtwarzanie warunków brzegowych w trójwymiarowym modelu ciągłego odlewania stopu aluminium

Jacek Smolka, Andrzej J. Nowak, Iwona Nowak, 2009 .

The R744 multi-ejector hybrid CFD and experimentally-based reduced-order model.

Sven Försterling, Armin Hafner, Jacek Smolka, 2018 .

CFD-based shape optimisation of two-phase ejector for R744.

Jacek Smolka, Adam Fic, Michal Palacz, 2015 .

Heat Recovery for a Textile Stenter: CFD Analysis of Air Curtain Benefits

Daniele Fiaschi, Giampaolo Manfrida, Jacek Smolka, 2019 .

Artificial intelligence optimisation of gas turbine systems

Andrzej Ziębik, Jacek Smolka, Andrzej J. Nowak, 2007 .

Design and simulations of refrigerated sea water chillers with CO2 ejector pumps for marine applications in hot climates

Armin Hafner, Yves Ladam, Jacek Smolka, 2018, Energy.

Analiza numeryczna procesu wymiany ciepła wewnątrz rozdzielnicy elektrycznej

Jacek Smolka, Andrzej J. Nowak, M. Bedkowski, 2012 .

Experimentally validated numerical model of coupled flow, thermal and electromagnetic problem in small power electric motor

Jacek Smolka, Luiz C. Wrobel, Lukasz Slupik, 2017 .

A comparison of homogeneous equilibrium and relaxation model for CO2 expansion inside the two-phase ejector

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2016 .

A comparison of heterogenous and homogenous models of two-phase transonic compressible CO2 flow through a heat pump ejector

Zbigniew Bulinski, Jacek Smolka, Andrzej J. Nowak, 2010 .

AI tool for automatic synthesis of CHP systems

Andrzej Ziębik, Jacek Smolka, Andrzej J. Nowak, 2007 .

CFD model of coupled thermal processes within coke oven battery as an example of complex industrial application

Jacek Smolka, Andrzej J. Nowak, Adam Fic, 2010 .

CFD-based 3-D optimization of the mutual coil configuration for the effective cooling of an electrical transformer

Jacek Smolka, J. Smolka, 2013 .

Application range of the HEM approach for CO2 expansion inside two-phase ejectors for supermarket refrigeration systems

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2015 .

Numerical investigation of heat transfer in a CO2 two-phase ejector

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2018, Energy.

Non-equilibrium approach for the simulation of CO2 expansion in two-phase ejector driven by subcritical motive pressure

Jacek Smolka, Krzysztof Banasiak, Jakub Bodys, 2020 .

Numerical modelling of thermal processes in an electrical transformer dipped into polymerised resin by using commercial CFD package fluent

Jacek Smolka, Andrzej J. Nowak, Luiz C. Wrobel, 2004 .

Experimental analysis of the R744 vapour compression rack equipped with the multi-ejector expansion work recovery module

Armin Hafner, Jacek Smolka, Krzysztof Banasiak, 2016 .

Numerical modelling of a multi-physical problem within an encapsulated three-phase transformer and its surroundings

Derek B. Ingham, Jacek Smolka, Andrzej J. Nowak, 2006 .

A gas ejector for CO2 supercritical cycles

Jacek Smolka, Andrzej J. Nowak, Krzysztof Banasiak, 2018, Energy.

Enhanced numerical model of performance of an encapsulated three-phase transformer in laboratory environment

Derek B. Ingham, Jacek Smolka, Andrzej J. Nowak, 2007 .

Genetic algorithm shape optimisation of a natural air circulation heating oven based on an experimentally validated 3-D CFD model

Jacek Smolka, J. Smolka, 2013 .

HEM and HRM accuracy comparison for the simulation of CO2 expansion in two-phase ejectors for supermarket refrigeration systems

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2017 .

Improved 3-D temperature uniformity in a laboratory drying oven based on experimentally validated CFD computations.

Jacek Smolka, Andrzej J. Nowak, A. Nowak, 2010 .

Performance operation of liquid ejectors for a R744 integrated multi-ejector supermarket system using a hybrid ROM

Sven Försterling, Armin Hafner, Jacek Smolka, 2020 .

Coupled numerical modelling of power loss generation in busbar system of low-voltage switchgear

Zbigniew Bulinski, Jacek Smolka, Andrzej J. Nowak, 2014 .

A CFD-based investigation of the energy performance of two-phase R744 ejectors to recover the expansion work in refrigeration systems: An irreversibility analysis

Armin Hafner, Zbigniew Bulinski, Jacek Smolka, 2014 .

Application of Bezier surfaces to the 3-D inverse geometry problem in continuous casting

Jacek Smolka, Andrzej J. Nowak, Iwona Nowak, 2011 .

A computational model of a transcritical R744 ejector based on a homogeneous real fluid approach

Armin Hafner, Zbigniew Bulinski, Jacek Smolka, 2013 .

Simulation of cooling enhancement in industrial low-voltage switchgear using validated coupled CFD-EMAG model

Zbigniew Bulinski, Jacek Smolka, M. Bedkowski, 2017 .

Numerical investigation of an R744 liquid ejector for supermarket refrigeration systems

Armin Hafner, Zbigniew Bulinski, Jacek Smolka, 2016 .

Experimental validation of the coupled fluid flow, heat transfer and electromagnetic numerical model of the medium-power dry-type electrical transformer

Jacek Smolka, Andrzej J. Nowak, A. Nowak, 2008 .

Modified homogeneous relaxation model for the r744 trans-critical flow in a two-phase ejector

Armin Hafner, Jacek Smolka, Andrzej J. Nowak, 2018 .

Performance comparison of fixed-and controllable-geometry ejectors in a CO2 refrigeration system.

Armin Hafner, Zbigniew Bulinski, Jacek Smolka, 2016 .