Yuki Shimizu

发表

Precision evaluation of surface form error of a large-scale roll workpiece on a drum roll lathe

Jung Chul Lee, Yuki Shimizu, Wei Gao, 2014 .

C017 Design and Testing of a Four-Probe Sensor Head For a Mosaic Grating Surface Encoder

Wei Gao, Yuki Shimizu, Takeshi Ito, 2013 .

Investigation and Improvement of Thermal Stability of a Chromatic Confocal Probe with a Mode-Locked Femtosecond Laser Source

Wei Gao, Ryo Sato, Yuki Shimizu, 2019, Applied Sciences.

Precision measurement of carriage slide motion error of a drum roll lathe

Jung Chul Lee, Yuki Shimizu, Wei Gao, 2012 .

Eccentric Error Compensation for Pitch Deviation Measurement of Gears

Wei Gao, Yuki Shimizu, So Ito, 2012 .

Influence of permanent magnet properties and arrangement on performance of IPMSMs for automotive applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

An insight into optical metrology in manufacturing

Yuki Shimizu, Hiraku Matsukuma, Xinghui Li, 2020 .

Uncertainty analysis of a six-degree-of-freedom surface encoder for a planar motion stage

Wei Gao, Masaya Furuta, Yuki Shimizu, 2018 .

Fabrication of large-size SiC mirror with precision aspheric profile for artificial satellite

Jung Chul Lee, Wei Gao, Yuki Shimizu, 2013 .

Error Separation Method for Precision Measurement of the Run-Out of a Microdrill Bit by Using a Laser Scan Micrometer Measurement System

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2018 .

3377 Height measurement of cutting edge by a laser displacement sensor

Akira Kato, Yuki Shimizu, Wei Gao, 2011 .

Accurate polarization control in nonorthogonal two-axis Lloyd’s mirror interferometer for fabrication of two-dimensional scale gratings

Wei Gao, Yuki Shimizu, Kai Zhang, 2019 .

On-machine surface measurement by a force sensor integrated Fast Tool Servo

Yuki Shimizu, Hiraku Matsukuma, Bo Wen, 2019 .

Precision measurement of micro-lens profile by using a force-controlled diamond cutting tool on an ultra-precision lathe

Yoshikazu Arai, Young-Jin Noh, Wei Gao, 2011 .

Self-calibration and compensation of setting errors for surface profile measurement of a microstructured roll workpiece

Wei Gao, Yuki Shimizu, So Ito, 2014 .

STUDY TO REDUCE NOISE IN DELTA-SIGMA MODULATOR INTEGRATED MIXER FOR BULLETIN OF GRADUATE ENGINEERING STUDIES

Yuki Shimizu, 2014 .

Fabrication of diffraction gratings for surface encoders by using a Lloyd’s mirror interferometer with a 405 nm laser diode

Wei Gao, Yuki Shimizu, So Ito, 2013, Other Conferences.

Improvement of an Air-Bearing Displacement Sensor with Nanometric Resolution

Wei Gao, Yuki Shimizu, So Ito, 2012 .

Fabrication of two-dimensional micro patterns for adaptive optics by using laser interference lithography

Xinghui Li, Wei Gao, Yuki Shimizu, 2015, International Conference on Optical and Photonic Engineering.

A Micro-Stage for Linear-Rotary Positioning

Wei Gao, Yuki Shimizu, So Ito, 2012 .

D221 Fundamental Study on the Effect of Heat Transfer from Shell Walls on Cargo Oil Heating of Tankers

Yuki Shimizu, Susumu Tanaka, Kazutaka Seki, 2013 .

A glass tube micro-stylus probe for surface form metrology

Wei Gao, Yuki Shimizu, Bin Xu, 2011, International Symposium on Precision Engineering Measurement and Instrumentation.

Design of a laser autocollimator-based optical sensor with a rangefinder for error correction of precision slide guideways

Wei Gao, Yuki Shimizu, So Ito, 2015 .

Measurement of six-degree-of-freedom planar motions by using a multiprobe surface encoder

Wei Gao, Yuki Shimizu, Takeshi Ito, 2014 .

Influence of Carrier Harmonics on Performance of IPMSMs for Automotive Applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2017 .

Efficiency improvement and downsizing of double-layered IPMSMs containing a strong magnet for automotive applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2017, 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe).

Design and Construction of a Low-Force Stylus Probe for On-machine Tool Cutting Edge Measurement

Yuki Shimizu, Wei Gao, Hiraku Matsukuma, 2020, Nanomanufacturing and Metrology.

Precision tool setting for fabrication of a microstructure array

Wei Gao, Young-Jin Noh, Yuki Shimizu, 2013 .

An in-process measurement method for repair of defective microstructures by using a fast tool servo with a force sensor

Wei Gao, Yuki Shimizu, So Ito, 2015 .

Experimental investigation of an air-bearing displacement sensor for on-machine surface form measurement of micro-structures

Yoshikazu Arai, Young-Jin Noh, Yuki Shimizu, 2011 .

Analysis of the forces in electrostatic force microscopy for profile measurement of micro-structured surface of dielectric

Zhigang Jia, Wei Gao, Yuki Shimizu, 2013, Precision Mechanical Measurements.

Dynamic Response of an Air-Bearing Displacement Sensor for on-Machine Surface Form Measurement

Yuki Shimizu, So Ito, Wei Gao, 2012 .

A Method for Expansion of Z-Directional Measurement Range in a Mode-Locked Femtosecond Laser Chromatic Confocal Probe

Wei Gao, Taku Nakamura, Ryo Sato, 2019 .

Surface form metrology of micro-optics

Wei Gao, Zhigang Jia, Yuki Shimizu, 2013, Other Conferences.

Pitch deviation measurement of an involute spur gear by a rotary profiling system

Wei Gao, Yuki Shimizu, So Ito, 2015 .

Measurement Technologies for Manufacturing

Jung Chul Lee, Wei Gao, Yuki Shimizu, 2019 .

Measurement Range Expansion of Chromatic Confocal Probe with Supercontinuum Light Source

Yuki Shimizu, Hiraku Matsukuma, Ryo Sato, 2021, Int. J. Autom. Technol..

Foreword to the Special Issue on Micro- and Nano-Metrology in Japan (I)

Masaki Michihata, Yuki Shimizu, Yasuhiro Mizutani, 2021 .

An Optical Frequency Domain Angle Measurement Method Based on Second Harmonic Generation

Wei Gao, Yuki Shimizu, Hiraku Matsukuma, 2021, Italian National Conference on Sensors.

Improvement of a Stitching Operation in the Stitching Linear-Scan Method for Measurement of Cylinders in a Small Dimension

Yuki Shimizu, Yindi Cai, Hiraku Matsukuma, 2021, Applied Sciences.

Generalized method for probing ideal initial polarization states in multibeam Lloyd's mirror interference lithography of 2D scale gratings

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2018 .

A New Method of Position Detection Using an Optical Scanning Angle Sensor.

Wei Gao, Yuki Shimizu, Satoshi Kiyono, 2001 .

Fabrication of micro-ball styluses for scanning-type surface form metrology

Wei Gao, Yuki Shimizu, Bin Xu, 2012 .

What is "Intelligent Measurement"? : Measurement Algorithm Affecting its Accuracy

Wei Gao, Yuki Shimizu, Yuki Shimizu, 2015 .

An edge reversal method for precision measurement of cutting edge radius of single point diamond tools

Wei Gao, Yuki Shimizu, So Ito, 2017 .

Self-calibration of Fizeau interferometer and planar scale gratings in Littrow setup.

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2017, Optics express.

Optical frequency domain angle measurement in a femtosecond laser autocollimator.

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2017, Optics express.

Design and testing of a compact non-orthogonal two-axis Lloyd's mirror interferometer for fabrication of large-area two-dimensional scale gratings

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2017 .

A Micro-ball Tapping Probe for Form Measurement of Micro-structured Surface

Wei Gao, Yuki Shimizu, So Ito, 2013 .

Fast evaluation of period deviation and flatness of a linear scale by using a Fizeau interferometer

Yuki Shimizu, Wei Gao, Akihide Kimura, 2012 .

A two-degree-of-freedom linear encoder with a mosaic scale grating

Lijiang Zeng, Wei Gao, Yuki Shimizu, 2011 .

Development of an optical probe for evaluation of tool edge geometry

Wei Gao, Yuki Shimizu, So Ito, 2014 .

Auto-tracking single point diamond cutting on non-planar brittle material substrates by a high-rigidity force controlled fast tool servo

Wei Gao, Yuki Shimizu, So Ito, 2017 .

A noncontact scanning electrostatic force microscope for surface profile measurement

Wei Gao, Yuki Shimizu, So Ito, 2012 .

Surface profile measurement of internal micro-structures

Wei Gao, Yuki Shimizu, So Ito, 2013 .

Development of a Micro-Sized Thermal Contact Sensor for Inspection of Surface Defects

Wei Gao, Yuki Shimizu, Yuki Shimizu, 2013, Int. J. Autom. Technol..

Optimal polarization modulation for orthogonal two-axis Lloyd's mirror interference lithography.

Wei Gao, Yuki Shimizu, Yuan-Liu Chen, 2017, Optics express.

Design optimization of a non-orthogonal two-axis Lloyd's mirror interferometer for fabrication of large-area two-dimensional scale gratings

Wei Gao, Yuki Shimizu, Hiraku Matsukuma, 2019, Precision Engineering.

On-machine form measurement of high precision ceramics parts by using a laser displacement sensor

Wei Gao, Yuki Shimizu, So Ito, 2014 .

Design and Test of a Three-Axis Mosaic Surface Encoder

Wei Gao, Yuki Shimizu, Koji Hosono, 2012 .

Feasibility study on the concept of thermal contact sensor for nanometre-level defect inspections on smooth surfaces

Wei Gao, Yuki Shimizu, Yuta Ohba, 2014 .

Uncertainty Evaluation for Measurements of Pitch Deviation and Out-of-Flatness of Planar Scale Gratings by a Fizeau Interferometer in Littrow Configuration

Wei Gao, Yuki Shimizu, Xiuguo Chen, 2018, Applied Sciences.

A Surface Encoder with a Multi-Spot Light Source.

Wei Gao, Yuki Shimizu, Satoshi Kiyono, 2002 .

Design and Experiment of Thermal Contact Sensor Detecting Defects on Si Wafer Surface

Yuki Shimizu, So Ito, Wei Gao, 2012 .

An optical lever by using a mode-locked laser for angle measurement

Wei Gao, Yuki Shimizu, So Ito, 2017 .

Fabrication of scale gratings for surface encoders by using laser interference lithography with 405 nm laser diodes

Wei Gao, Yuki Shimizu, So Ito, 2013 .

A two-axis Lloyd's mirror interferometer for fabrication of two-dimensional diffraction gratings

Wei Gao, Yuki Shimizu, So Ito, 2014 .

A Design Study of a Heat Flow-Type Reading Head for a Linear Encoder Based on a Micro Thermal Sensor

Wei Gao, Yuki Shimizu, Hiraku Matsukuma, 2019, Nanomanufacturing and Metrology.

A sub-nanometric three-axis surface encoder with short-period planar gratings for stage motion measurement

Lijiang Zeng, Wei Gao, Yuki Shimizu, 2012 .

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions.

Wei Gao, Yuki Shimizu, So Ito, 2016, Optics express.

B003 Design of a stylus displacement sensor with a low measuring force

Akira Kato, Yuki Shimizu, So Ito, 2013 .

Cutting Edge Height Measurement of a Rotary Cutting Tool by a Laser Displacement Sensor

Akira Kato, Yuki Shimizu, So Ito, 2012 .

Evaluation of the grating period based on laser diffraction by using a mode-locked femtosecond laser beam

Wei Gao, Yuki Shimizu, Hiraku Matsukuma, 2018 .

A six-degree-of-freedom surface encoder for precision positioning of a planar motion stage

Wei Gao, Songyi Dian, Yuki Shimizu, 2013 .

Characterization of electrostatic force for scanning electrostatic force microscopy of micro-structured surface

Zhigang Jia, Wei Gao, Yuki Shimizu, 2013 .

Integration of a Cr–N Thin-Film Displacement Sensor into an XY Micro-stage for Closed-Loop Nano-positioning

Wei Gao, Yuki Shimizu, Eiji Niwa, 2019, Nanomanufacturing and Metrology.

Three-axis vibration measurement by using a grating-interferometric vibrometer

Wei Gao, Yuki Shimizu, So Ito, 2014 .

Surface Form Measurement and Analysis of a Cylindrical Workpiece with Microstructures

Wei Gao, Yuki Shimizu, So Ito, 2012 .

A Cr-N thin film displacement sensor for precision positioning of a micro-stage

Yuki Shimizu, So Ito, Yuxin Peng, 2014 .

Implementation and verification of a four-probe motion error measurement system for a large-scale roll lathe used in hybrid manufacturing

Wei Gao, Jeong Seok Oh, Yuki Shimizu, 2017 .

Design and testing of a four-probe optical sensor head for three-axis surface encoder with a mosaic scale grating

Wei Gao, Yuki Shimizu, Xinghui Li, 2014 .

An autocollimator with a mid-infrared laser for angular measurement of rough surfaces

Yuki Shimizu, Hiraku Matsukuma, Wei Gao, 2021 .

Form Error Characterization of Reflective-Type Gratings

Wei Gao, Yuki Shimizu, So Ito, 2012 .

Measurement of Cutting Edge Width of a Rotary Cutting Tool by Using a Laser Displacement Sensor

Wei Gao, Akira Kato, Yuki Shimizu, 2014, Int. J. Autom. Technol..

A micro optical probe for edge contour evaluation of diamond cutting tools

Wei Gao, Yuki Shimizu, So Ito, 2014 .

Mode-locked laser autocollimator with an expanded measurement range.

Wei Gao, Yuki Shimizu, So Ito, 2016, Optics express.

Optical Analysis of an Optical Probe for Three-Dimensional Position Detection of Micro-Objects

Wei Gao, Takemi Asai, Yuki Shimizu, 2011, Int. J. Autom. Technol..

A Three-Axis Angle Sensor with a Linear Encoder Scale Reflector

Yuki Shimizu, So Ito, Taiji Maruyama, 2017 .

Reduction in Cross-Talk Errors in a Six-Degree-of-Freedom Surface Encoder

Wei Gao, Yuki Shimizu, Xinghui Li, 2019, Nanomanufacturing and Metrology.

New Measurement Concept of Nanometer-Level Defects on Si Wafer Surface by Using Micro Contact Sensor

Wei Gao, Yuki Shimizu, Wen Jian Lu, 2012 .

Establishment of a measuring station on a diamond turning machine for in-process cutting edge inspection of single point diamond micro-tools

Takemi Asai, Yuki Shimizu, SungHo Jang, 2012 .

Influences of misalignment errors of optical components in an orthogonal two-axis Lloyd's mirror interferometer.

Wei Gao, Yuki Shimizu, So Ito, 2016, Optics express.