Kaoru Gotoh

发表

Effect on electric field of foam block in GTEM cell

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2009, 2009 IEEE International Symposium on Electromagnetic Compatibility.

Calibration of electric field probes with three orthogonal elements by standard field method

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2009, IEICE Electron. Express.

Development of three-antenna method measurement system for low-sensitivity optical electric field sensor

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2010, IEICE Electron. Express.

Evaluation of Electromagnetic Noise Emitted from Light-Emitting Diode (LED) Lamps and Compatibility with Wireless Medical Telemetry Service

Ifong Wu, Kaoru Gotoh, Yasushi Matsumoto, 2020, IEICE Trans. Commun..

A Method for Converting Amplitude Probability Distribution of Disturbance from One Measurement Frequency to Another

Kaoru Gotoh, Yasushi Matsumoto, Takashi Shinozuka, 2008, IEICE Trans. Commun..

Development of measuring apparatus for conducted disturbance voltage using TEM cell up to 1 GHz

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2014, 2014 International Symposium on Electromagnetic Compatibility.

Impact of LED lamp noise on receiver sensitivity of wireless medical telemetry system

Ifong Wu, Kaoru Gotoh, Yasushi Matsumoto, 2018 .

Direction Finding of Distributed Man-Made Noise Sources Using Artificial Neural Networks

Masashi Hayakawa, Kaoru Gotoh, Hirari Mehrez, 1998 .

Impedance characterastic of new type measurement system for measuring conducted disturbance

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2017, 2017 International Symposium on Electromagnetic Compatibility - EMC EUROPE.

A Study on the Disturbance Evaluations related to the Performance of Digital Communication Systems (Part 3)

Kaoru Gotoh, Yasushi Matsumoto, Takashi Shinozuka, 2004 .

Comparison Between Impulsive Noise Models Considering a Time Structure of LED Noise

Ryosuke Suga, Kaoru Gotoh, Yasushi Matsumoto, 2019, 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE.

Electromagnetic compatibility of wireless medical telemetry systems and light-emitting diode (LED) lamps

Kaoru Gotoh, Yasushi Matsumoto, Eisuke Hanada, 2018 .

APD (Amplitude Probability Distribution) Measurement of Electromagnetic Disturbance: Fundamentals and Research Directions

Kaoru Gotoh, Yasushi Matsumoto, 2007 .

BI-1-3 Reconstruction technique of ESD field and evaluation of impact on wireless communications

Shinobu Ishigami, Kaoru Gotoh, Yasushi Matsumoto, 2015 .

Evaluation of Electromagnetic Noise Radiated from Tube-type LED Lamps and Its Effect on Wireless Medical Telemetry Systems

Ifong Wu, Kaoru Gotoh, Yasushi Matsumoto, 2019, 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE.

Calibration of electric field probes in GTEM cell using reference antenna method

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2009, IEICE Electron. Express.

The effect of a low dielectric material placed at the tip of a GTEM cell on the electric field

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2009, IEICE Electron. Express.

Interference study of microwave ovens emission with satellite broadcasting according to the emission limits in CISPR 11

Shinobu Ishigami, Kaoru Gotoh, Yasushi Matsumoto, 2013, 2013 International Symposium on Electromagnetic Compatibility.

Dependence of Attenuation of Common Mode Radiation from Indoor Power Line Communication System on Structure of Reinforced Concrete Wall

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2009, IEICE Trans. Commun..

Relation between electromagnetic noise from LED light bulb and its impact on bit error rate performance of DTTB

Hiroki Ohta, Ifong Wu, Shinobu Ishigami, 2012, IEICE Electron. Express.

Use of independent component analysis to separate noise sources in emissions radiated from LED lamps

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2014, 2014 International Symposium on Electromagnetic Compatibility.

Evaluation of Electromagnetic Interference with Wireless Medical Telemeter by Radiation Noise from LED Lamps.

Ifong Wu, Kaoru Gotoh, Yasushi Matsumoto, 2019 .

Reconstruction technique of ESD field and impact on wireless communications

Shinobu Ishigami, Kaoru Gotoh, Yasushi Matsumoto, 2015, 2015 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC).

Statistical Characteristics of Radiation Noise from LED Lamps and its Effect on Wireless Medical Telemeters

Ifong Wu, Kaoru Gotoh, Yasushi Matsumoto, 2018, 2018 International Symposium on Electromagnetic Compatibility (EMC EUROPE).

Basic analysis of large quasi-TEM waveguides using dipole frequency selective surface for EMC testing

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2011, IEICE Electron. Express.

Probe calibration by using a different type of probe as a reference in GTEM cell above 1GHz

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2010, IEICE Electron. Express.

Modal S-Parameter Estimation of EUT Connection of Conducted Disturbance Measurement System

Ifong Wu, Shinobu Ishigami, Kaoru Gotoh, 2018, 2018 International Symposium on Electromagnetic Compatibility (EMC EUROPE).

A New Method of Interference Evaluation Between UWB System and Wireless LAN Using a GTEM Cell

Masashi Yamada, Shinobu Ishigami, Kaoru Gotoh, 2010 .

APD Measurement for Evaluating Disturbances Related to the Performance of Digital Communication Systems

Kaoru Gotoh, Yasushi Matsumoto, Yukio Yamanaka, 2005, IEICE Trans. Commun..

An Expression for Maximum Bit Error Probability Using the Amplitude Probability Distribution of an Interfering Signal and Its Application to Emission Requirements

Kaoru Gotoh, Yasushi Matsumoto, 2013, IEEE Transactions on Electromagnetic Compatibility.

A method of defining emission limits including the gradient of an amplitude-probability-distribution curve

Kaoru Gotoh, K. Gotoh, Y. Matsumoto, 2014, 2014 International Symposium on Electromagnetic Compatibility.

Characteristics of Radiation Noise from an LED Lamp and Its Effect on the BER Performance of an OFDM System for DTTB

Hiroki Ohta, Ifong Wu, Shinobu Ishigami, 2014, IEEE Transactions on Electromagnetic Compatibility.