Kazunaga Ueda

发表

Final report on APMP.M.F-K4.b key comparison for 2 MN force

Yon-Kyu Park, Kazunaga Ueda, Thomas W. Bartel, 2012 .

Experimental verification of the evaluation method of creep uncertainty from reversibility error prescribed in ISO 376:2011

Kazunaga Ueda, Toshiyuki Hayashi, 2016, 2016 55th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE).

Davies bar as the reference for impact acceleration metrology

Kazunaga Ueda, Akira Umeda, 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

Current status of measurement standards for vibration and shock in NRLM

Kazunaga Ueda, Takashi Usuda, Tamio Ishigami, 2000, International Conference on Vibration Measurements by Laser Techniques: Advances and Applications.

Performance evaluation of a mass comparator with a readability of 0.1 μg

Kazunaga Ueda, Masaaki Ueki, Jian-Xin Sun, 2010, Proceedings of SICE Annual Conference 2010.

A 100g Mass Comparator with an Improved Readability and Measuring Environment

Kazunaga Ueda, Jianxin Sun, Masaaki Ueki, 2012 .

Confirmation of calibration capability of low-nominal capacity reference torque wrenches at NMIJ

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2017 .

Inter-laboratory comparison between NMIJ and KRISS of calibration capabilities for torque measuring devices in the range from 50 N·m to 2 kN·m

Yon-Kyu Park, Min-Seok Kim, Kazunaga Ueda, 2017 .

Study on the Dynamic Force/Acceleration Measurements

Kazunaga Ueda, Akira Umeda, K. Ueda, 1990 .

Evaluation of actual sensitivity limit in a 10 N·m dead weight torque standard machine and stability of a new 1 N·m torque transducer

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2012 .

RENOVATION OF NMIJ'S 5 MN HYDRAULIC AMPLIFICATION TYPE FORCE STANDARD MACHINE

Kazunaga Ueda, Toshiyuki Hayashi, Hiroshi Maejima, 2013 .

Variable speed control of hydraulically driven weight stacks in a 540 kN force standard machine

Kazunaga Ueda, Toshiyuki Hayashi, Yukio Yamaguchi, 2010, Proceedings of SICE Annual Conference 2010.

Direct Calibration Chain for Hand Torque Screwdrivers from the National Torque Standard

Kazunaga Ueda, Koji Maeda, Atsuhiro Nishino, 2015 .

Uncertainty evaluation of a 10N·m dead weight torque standard machine and comparison with a 1kN·m dead weight torque standard machine

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2014 .

CALIBRATION CHAIN FOR HAND TORQUE SCREWDRIVERS

Kazunaga Ueda, Koji Maeda, K. Ogushi, 2014 .

Mass Measurement of 1-kg Silicon Spheres for Determination of the Avogadro and Planck Constants

Naoki Kuramoto, Kenichi Fujii, Kazunaga Ueda, 2015, IEEE Transactions on Instrumentation and Measurement.

Calibration of a torque wrench tester using a reference torque wrench

Kazunaga Ueda, Koji Maeda, Atsuhiro Nishino, 2011, SICE Annual Conference 2011.

DEVELOPMENT OF A NEW SMALL-RATED-CAPACITY REFERENCE TORQUE WRENCH

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2013 .

Final report on force key comparison CCM.F-K2.a and CCM.F-K2.b (50 kN and 100 kN)

Kazunaga Ueda, Zhang Zhimin, Rolf Kumme, 2012 .

Evaluation of dynamic response of a femur sensor using impact

Kazunaga Ueda, Akira Umeda, 1999 .

Usage history of three mass comparators in the past 20 years

Kazunaga Ueda, Jianxin Sun, Masaaki Ueki, 2017 .

Performance of a stiffened 50 N force comparator referring to a tuning-fork force transducer

Kazunaga Ueda, Toshiyuki Hayashi, 2018 .

Evaluation of moment arm length and fulcrum sensitivity limit in a 10 N·m dead weight torque standard machine

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2010 .

Uncertainty evaluation of the 20 kN m deadweight torque standard machine

Kazunaga Ueda, Takashi Ota, Koji Ohgushi, 2007 .

Remaining differences among precision strain-gauge amplifiers for force transducers after compensation with reference to a common bridge calibration unit

Kazunaga Ueda, Toshiyuki Hayashi, 2017 .

Evaluation of tuning fork type force transducer for use as a transfer standard

Masaaki Kobayashi, Kazunaga Ueda, Toshiyuki Hayashi, 2008 .

Miniaturization of a 50 N tuning-fork type force transducer by adopting a simplified Roberval mechanism

Kazunaga Ueda, Toshiyuki Hayashi, 2018 .

Range expansion of the reference torque wrench calibration service to 5 kN m at NMIJ

Kazunaga Ueda, Koji Maeda, Atsuhiro Nishino, 2012 .

Recent renovations of dead-weight type force standard machines at NMIJ

Kazunaga Ueda, Toshiyuki Hayashi, Yukio Yamaguchi, 2013 .

FIVE PROFICIENCY TESTING PROGRAMS FOR THE JCSS WEIGHT CALIBRATION LABORATORIES

Kazunaga Ueda, Jianxin Sun, Masaaki Ueki, 2013 .

Calibration of reference torque wrenches using a 10 N m deadweight torque standard machine

Kazunaga Ueda, Atsuhiro Nishino, Koji Ogushi, 2015 .

Automatic rotation equipment for tensile force transducers applying to 3 kN dead-weight type force standard machine

Kazunaga Ueda, Toshiyuki Hayashi, Yukio Yamaguchi, 2011, SICE Annual Conference 2011.

Development of a high-accuracy 500 kg mass comparator for improved weight calibration capability

Kazunaga Ueda, Jianxin Sun, Masaaki Ueki, 2017 .

Bilateral comparisons of measurement capabilities for the calibration of low nominal capacity torque measuring devices between NMIJ and PTB in the range from 0.1 N m to 10 N m using different procedures

Kazunaga Ueda, Dirk Röske, Atsuhiro Nishino, 2015 .

Investigation on the frequency response characteristics of an instrument for laser vibrometry and laser displacementmetry

Kazunaga Ueda, Akira Umeda, 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

Experimental Study on the Uncertainty in Static Calibration of a Torque Measuring Device

Kazunaga Ueda, Takashi Ota, Koji Ohgushi, 2003 .

Generation of Motion in Microstructures using the Reflection of Pulse Elastic Waves.

Kazunaga Ueda, Akira Umeda, Takashi Usuda, 1995 .

Ambient pressure compensation for hermetically sealed force transducers

Kazunaga Ueda, K. Ueda, Toshiyuki Hayashi, 2016 .

Characterization of shock accelerometers using Davies bar and laser interferometer

Kazunaga Ueda, Akira Umeda, 1995 .

Dynamic response of strain gages up to 300 kHz

Kazunaga Ueda, Akira Umeda, K. Ueda, 1998 .