Shungo Natsui

发表

Numerical Analysis of Blast Furnace by Discrete Element Type Model

Shungo Natsui, 2016 .

Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

SPH simulations of the behavior of the interface between two immiscible liquid stirred by the movement of a gas bubble

Takehiko Kumagai, Tatsuya Kikuchi, Shungo Natsui, 2016 .

Fabrication of Self-Ordered Porous Alumina via Etidronic Acid Anodizing and Structural Color Generation from Submicrometer-Scale Dimple Array

Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, 2015 .

Sensitivity Analysis of Physical Parameters in Discrete Element Method Compared with Blast Furnace Cold Model Experiments

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2012 .

Effect of High Reactivity Coke for Mixed Charge in Ore Layer on Reaction Behavior of Each Particle in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2013 .

Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2010 .

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2011 .

Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing

Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, 2013, Scientific Reports.

Influence of Shape of Cohesive Zone on Gas Flow and Permeability in the Blast Furnace Analyzed by DEM-CFD Model

Tatsuro Ariyama, Hiroshi Nogami, Shigeru Ueda, 2015 .

Influence of Blast Furnace Inner Volume on Solid Flow and Stress Distribution by Three Dimensional Discrete Element Method

Tatsuro Ariyama, Ryo Inoue, Satoru Igarashi, 2010 .

Self-Ordering Behavior of Anodic Porous Alumina via Selenic Acid Anodizing

Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, 2014 .

Exploration for the Self-ordering of Porous Alumina Fabricated via Anodizing in Etidronic Acid

Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, 2016 .

Model study of the effect of particles structure on the heat and mass transfer through the packed bed in ironmaking blast furnace

Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, 2015 .

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2012 .