Yoshio Saito

发表

Measuring Rotational Motion of Sphere Supported by Air Flow.

Yoshimi Ito, Chikao Inaba, Satoru Yamanaka, 2000 .

High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision

Tomohisa Tanaka, Yoshio Saito, Jiang Zhu, 2014 .

Surface breakdown phenomena in alumina rf windows

Yoshio Saito, Yoshio Saito, 1995, Other Conferences.

A study on cooling process of water in small lagertank

Yoshio Saito, Yuji Takamoto, Katsuoki Kawanishi, 2000 .

Current Situations and Issues of Boston College's Distance Education and Campus-wide Cable TV

Yoshio Saito, 1998 .

Development of measuring apparatus for drill wandering motion.

Yoshio Saito, Masamichi Kato, Shinzo Enomoto, 1990 .

Structural and infrared spectral changes of silicon oxide grains by heat treatments

Yoshio Saito, Tomonari Morioka, Seiji Kimura, 1997 .

1208 Fundamental Study for Control of Hue and Brightness in the Laser Coloring

Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito, 2015 .

In-situ surface charge distribution measurement of alumina insulator surfaces after impulse voltage application in vacuum

Shinichi Kobayashi, Noriaki Sato, Yoshio Saito, 1994, Other Conferences.

Precision surface finish by new blasting process with grit recovery system

Yoshio Saito, S. Ooba, T. Hanaoka, 1988 .

S1303-2-2 Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface

Tomohisa Tanaka, Yoshio Saito, Jiang Zhu, 2009 .

Preliminary Throughflow Analysis of a Lift Fan in a Core Separated Turbofan Engine System

Yoshio Saito, Toshimasa Shiratori, Masahiro Nakajima, 2004 .

S131012 Fabrication and evaluation of 3D shape by rapid prototyping

Tomohisa Tanaka, Yoshio Saito, Jiang Zhu, 2011 .

Estimation of Contact Pressure between Bearing and Bearing Housing by Means of Ultrasonic Waves.

Hiroshi Tomonaga, Yoshimi Ito, Chikao Inaba, 2000 .

Vacuum-breakdown properties of oxygen-free copper electrodes machined by diamond turning for mirror finish

Kiyomatsu Takeuchi, Shinichi Kobayashi, Yoshio Saito, 1994, Other Conferences.

A Proposal of Non-Contact-and Driving-Type Painting Method of Sphere

Yoshimi Ito, Chikao Inaba, Yoshio Saito, 1998 .

Numerical estimations of the deflection-reducing process in belt grinding.

Yoshio Saito, Shizuichi Higuchi, Tadaaki Hanaoka, 1990 .

Influence of in-situ ion-beam sputter cleaning on the conditioning effect of vacuum gaps

Yoshio Saito, Hiroyuki Kojima, Shinichi Kobayashi, 1994, Other Conferences.

STATUS OF THE J-PARC RFQ

Kazuo Hasegawa, Hiroshi Kawamata, Hiroshi Matsumoto, 2009 .

Acoustic Emission and Deformation Mode in Ceramics During Indentation

Yoshio Saito, Javad Akbari, Shinzo Enomoto, 1994 .

N2 Tunnel Wafer Transport System

Yoshio Saito, Takahisa Nitta, Masayuki Toda, 1997 .

Vacuum electrical breakdown characteristics of oxygen-free copper electrodes processed by precision machining

Yoshio Saito, N. Toge, Koji Takada, 2002, 20th International Symposium on Discharges and Electrical Insulation in Vacuum.

LARGE-SCALE CRYOGENIC GRAVITATIONAL WAVE TELESCOPE

Shinji Miyoki, Michael E. Tobar, Ken-ichi Ueda, 1999 .

Design and evaluation of a compact 50 MW rf source of the PF linac for the KEKB project

Shigeki Fukuda, Shinichiro Michizono, Yoshio Saito, 1996 .

Using Acoustic Emission for Monitoring of Grinding Process of Fine Ceramics : Sensitivity of AE to Grain Depth of Cut

Yoshio Saito, Javad Akbari, Shinzo Enomoto, 1995 .

Study on the Chucking Force of Electro-Magnetic Chuck

Kazutaka Okimoto, Yoshio Saito, Nobuhiko Nishiwaki, 1985 .

Klystron modulator for the KEK 2.5 GeV linac

Shigeki Fukuda, Yoshio Saito, Hiroyuki Honma, 1989 .

Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system

Yoshio Saito, Ahmed A. D. Sarhan, M. Sayuti, 2012, The International Journal of Advanced Manufacturing Technology.

Development of a multistage laser frequency stabilization for an interferometric gravitational-wave detector

Norihiko Kamikubota, Takayuki Tomaru, Takashi Uchiyama, 2003 .

Measurement of Schumann Resonance at Kamioka

Shinji Miyoki, Yoshio Saito, Osamu Miyakawa, 2016 .

Novel method for the preparation of silicon oxide layer on TiO2 particle and dynamic behavior of silicon oxide layer on TiO2 particle

Yoshio Saito, Hitoshi Suzuki, Chihiro Kaito, 2003 .

Effect of grinding parameters on acoustic emission signals while grinding ceramics

Yoshio Saito, Javad Akbari, Shizuichi Higuchi, 1996 .

Multi-Resolution Mesh for Sculptured Surface Machining

Jiang Zhu, Yoshio Saito, Tomohisa Tanaka, 2007 .

Trajectory simulation of multipactoring electrons in an S-band pillbox RF window

S. Michizono, Yoshio Saito, S. Anami, 1992 .

Flashover from surface charge distribution on alumina insulators in vacuum

Yoshio Saito, Tumiran, Mitsuaki Maeyama, 1997 .

Electron Microscopy and Diffraction Studies of the Structure of Amorphous WO3 Film

Yoshio Saito, Chihiro Kaito, Yoshio Saito, 1985 .

Log-Gamma Distribution Model of Intermittency in Turbulence

Yoshio Saito, Yoshio Saito, 1992 .

Experimental Analysis and Optimization of Cutting Parameters for End Milling Aluminium Alloy

Yoshio Saito, Nafis Ahmad, Ryo Wakabayashi, 2007 .

Structure and Thickness of Natural Oxide Layer on Ultrafine Particle

Yoshio Saito, Hitoshi Suzuki, Chihiro Kaito, 2003 .

Development of a 2-kW XeCl laser with a surface corona preionization scheme and a spiker-sustainer circuit

Yukio Sato, Yoshio Saito, Shuichi Fujikawa, 1995 .

Electrical breakdown strength of oxygen-free copper electrodes under surface and bulk treatment conditions

Yoshio Saito, Shinichi Kobayashi, Y Hashimoto, 1996 .

Breakdown of alumina RF windows

Yoshio Saito, Akira Kinbara, Shozo Anami, 1989 .

Effect of surface treatment on the adsorption kinetics of water vapor in a vacuum chamber

Yoshio Saito, Yutaka Tuzi, T Tanaka, 1996 .