René Mayer

发表

Performance of a five-axis machine tool as a coordinate measuring machine (CMM)

Mizanur Rahman, René Mayer, 2016 .

Programming of a machining procedure for adaptive spiral cutting trajectories

René Mayer, R. Roy, J-F. Chatelain, 2008 .

Surface probing simulator for the evaluation of CMM probe radius correction software

René Mayer, Adam Woźniak, Tibet Erkan, 2011 .

A portable instrument for 3-D dynamic robot measurements using triangulation and laser tracking

René Mayer, G. A. Parker, G. Parker, 1994, IEEE Trans. Robotics Autom..

Optimization of adaptive spiral toolpaths for pocket machining

Jean-François Chatelain, René Mayer, R. Roy, 2008 .

NC-simulation for the prediction of surface finish in 5-axis High-Speed Machining

Christophe Tournier, Claire Lartigue, Sylvain Lavernhe, 2008 .

Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines

Marek Balazinski, René Mayer, Mohamed Slamani, 2010 .

Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors

Sofiane Achiche, René Mayer, Kanglin Xing, 2020, Int. J. Autom. Technol..

Experimental evaluation of errors during five axis High-Speed Machine tool motion

Sylvain Lavernhe, René Mayer, Loïc Andolfatto, 2011 .

Teaching Tolerances: A Comparison between the Conventional and Reverse Engineering Approaches

René Mayer, Joseph Pegna, Clément Fortin, 1998 .

Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements

Marek Balazinski, René Mayer, Mohamed Slamani, 2013 .

Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool pdf

Sylvain Lavernhe, René Mayer, Loïc Andolfatto, 2011, ArXiv.

IMPROVEMENT TO HIGH-SPEED END MILL BORING ACCURACY BY A SIMPLE COMPENSATION STRATEGY

Marek Balazinski, René Mayer, Mohamed Slamani, 2012 .

Surface shape prediction in high speed milling

René Mayer, Henri Paris, Grégoire Peigne, 2004 .

Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements

Marek Balazinski, Claire Lartigue, René Mayer, 2010 .

Development of a Spiral Trajectory for High Speed Roughing of Light Alloy Aerospace Components

Jean-François Chatelain, René Mayer, Réjean Roy, 2008 .

Proximity weighted correction of high density high uncertainty (HDHU) point cloud using low density low uncertainty (LDLU) reference point coordinates

Adam Wozniak, René Mayer, Michal Bartosz Rak, 2015 .

Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process

Marek Balazinski, René Mayer, Serafettin Engin, 2014, Int. J. Comput. Integr. Manuf..

Adaptive Monte Carlo applied to uncertainty estimation in a five axis machine tool link errors identification pdf

Sylvain Lavernhe, René Mayer, Loïc Andolfatto, 2011, ArXiv.

Condition Monitoring of Manufacturing Processes under Low Sampling Rate

Sofiane Achiche, René Mayer, Gabriel Bernard, 2021 .

Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact

René Mayer, Farbod Khameneifar, Rémi Bonin, 2021, Sensors.

Chaotic Tool Wear During Machining of Titanium Metal Matrix Composite (TiMMCs)

Marek Balazinski, René Mayer, M. Balazinski, 2014 .