Robert J. Hocken

发表

Multi-scale Alignment and Positioning System – MAPS

Tsu-Chin Tsao, Ronnie R. Fesperman, Ozkan Ozturk, 2012 .

Robert J. Hocken, Christopher A. Brown, Nilay Chakraborty, 2005 .

Characterization and compensation of dynamic errors of a scanning coordinate measuring machine

Robert J. Hocken, P. H. Pereira, R. Hocken, 2007 .

A Technique for Enhancing Machine Tool Accuracy by Transferring the Metrology Reference From the Machine Tool to the Workpiece

Robert J. Hocken, Bethany A. Woody, K. Scott Smith, 2007 .

The long-range scanning stage: a novel platform for scanned-probe microscopy

David L. Trumper, Michael L. Holmes, Robert J. Hocken, 2000 .

Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine

Robert J. Hocken, Jimmie A. Miller, P. Ramu, 2011 .

Performance Evaluation of Ultra-Precision Motion Controlled Positioning Stage

Stuart T. Smith, David L. Trumper, Robert J. Hocken, 2008 .

Dynamics and Control of the UNCC/MIT Sub-Atomic Measuring Machine

David L. Trumper, Robert J. Hocken, C. Wang, 2001 .

Evaluation of Runout Deviation at Bevel Gears based on Pitch Measurements

Robert J. Hocken, A. Guenther, R. Hocken, 2006 .

Part Form Errors Predicted from Machine Tool Performance Measurements

Robert G. Wilhelm, Robert J. Hocken, N. Srinivasan, 1997 .

Task Specific Uncertainty in Coordinate Measurement

Robert G. Wilhelm, Robert J. Hocken, Heinrich Schwenke, 2001 .

Design and performance evaluation of a coarse/fine precision motion control system

Stuart T. Smith, David M. Otten, David L. Trumper, 2005 .

Illumination model and plate calibration method for vision-based coordinate measuring machines

Robert J. Hocken, Jiyou Fu, 2000 .

Approach for uncertainty analysis and error evaluation of four-axis co-ordinate measuring machines

Robert J. Hocken, Gregory W. Caskey, Jimmie A. Miller, 2009 .

Dimensional metrology at the National Bureau of Standards

Robert J. Hocken, Philip Nanzetta, 1983 .

Taut Wire Straightedge Reversal Artifact

Robert J. Hocken, James G. Salsbury, 2002 .

Development of a rapid profilometer with an application to roundness gauging

Stuart T. Smith, Robert J. Hocken, Shane C. Woody, 2006 .

Mechatronics and Control of a Precision Motion Stage for Nano-Manufacturing

Tsu-Chin Tsao, Ronnie R. Fesperman, Ozkan Ozturk, 2009 .

Contribution of CIRP to the Development of Metrology and Surface Quality Evaluation during the last fifty years

Hisayoshi Sato, S. Sartori, Paul Vanherck, 2001 .

Construction and testing of a nanomachining instrument

Wei Gao, Robert J. Hocken, John A. Patten, 2000 .

Uncertainity Analysis for the Fiducial Calibration System

Robert J. Hocken, Bethany A. Woody, K. Scott Smith, 2005 .

Self-Calibration: Reversal, Redundancy, Error Separation, and ‘Absolute Testing’

Robert J. Hocken, Christopher J. Evans, W. Tyler Estler, 1996 .

High-Accuracy Atomic-Force-Microscope Head For Dimensional Metrology

David L. Trumper, Robert J. Hocken, Darya Amin-Shahidi, 2010 .

Engineering Nanotechnology: The Top Down Approach

Ronnie R. Fesperman, Ozkan Ozturk, Robert J. Hocken, 2008 .

Design evaluation of a single-axis precision controlled positioning stage

Stuart T. Smith, David M. Otten, Robert J. Hocken, 2009 .

Magnetic bearing stage for photolithography

David L. Trumper, Robert J. Hocken, M. E. Williams, 1993 .

Quick and dynamic measurements of geometric errors of CNC machines

Robert J. Hocken, Qibo Feng, Jimmie A. Miller, 2000, Optics and Optoelectronic Inspection and Control.

Nanometrology - The Frontier of Precision

Robert J. Hocken, R. Hocken, 2002 .

Atomic force microscope for accurate dimensional metrology

David L. Trumper, Robert J. Hocken, Aaron D. Mazzeo, 2009 .

High-Accuracy Atomic Force Microscope

David L. Trumper, Robert J. Hocken, Darya Amin-Shahidi, 2011 .

Development of a virtual probe tip with an application to high aspect ratio microscale features

Robert J. Hocken, Shane C. Woody, Marcin B. Bauza, 2005 .

Effect of Tool Edge Geometry on the Nanometric Cutting of Ge

Robert J. Hocken, Don A. Lucca, R. Hocken, 1998 .

Evaluation of a novel UHMWPE bearing for applications in precision slideways

Robert J. Hocken, Richard M. Seugling, Eric S. Buice, 2006 .

X-ray calibrated tunneling system utilizing a dimensionally stable nanometer positioner

Robert J. Hocken, R. Hocken, Stuart T. Smith, 1996 .

A Long-Range Scanning state design (The LORS project)

David L. Trumper, Michael L. Holmes, Robert J. Hocken, 1996 .

Phase Imaging in the Near Field

Ronnie R. Fesperman, Robert J. Hocken, Kert Edward, 2004 .

Scanning tunneling microscopy bit making on highly oriented pyrolytic graphite: Initial results

Robert J. Hocken, R. Hocken, Jimmie A. Miller, 1990 .

A portable three-dimensional stylus profile measuring instrument

Robert J. Hocken, J. Raja, Stuart T. Smith, 1996 .

Alignment uncertainties in ideal indentation styli

Robert J. Hocken, Jonathan D. Ellis, R. Hocken, 2008 .