W H Harris

发表

Removal of broken stems of total joint components by a new method: drilling, undercutting, and extracting without damage to bone.

W H Harris, R E White, S Mitchell, 1981, The Hip.

Analysis of the kinematics of different hip simulators used to study wear of candidate materials for the articulation of total hip arthroplasties

W H Harris, B S Ramamurti, D M Estok, 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

My first 50 years of orthopaedic surgery.

W H Harris, W. Harris, 2001, The Journal of arthroplasty.

Extensive localized bone resorption in the femur following total hip replacement.

W H Harris, W. Harris, A. Schiller, 1976, The Journal of bone and joint surgery. American volume.

Advances in surgical technique for total hip replacement: without and with osteotomy of the greater trochanter.

W H Harris, W. Harris, 1980, Clinical orthopaedics and related research.

Wear of Polyethylene Acetabular Components in Total Hip Arthroplasty. An Analysis of One Hundred and Twenty-eight Components Retrieved at Autopsy or Revision Operations*

W H Harris, M Jasty, W. Harris, 1997, The Journal of bone and joint surgery. American volume.

Resultant loads and elastic modulus calibration of long bone cross sections.

D R Carter, W H Harris, D. Carter, 1981, Journal of biomechanics.

A quantitative evaluation of periprosthetic bone-remodeling after cementless total hip arthroplasty.

W H Harris, C. Engh, W. Harris, 1992, The Journal of bone and joint surgery. American volume.

Gamma sterilization of UHMWPE articular implants: an analysis of the oxidation problem. Ultra High Molecular Weight Poly Ethylene.

W H Harris, W. Harris, E. Merrill, 1996, Biomaterials.

Femoral component loosening using contemporary techniques of femoral cement fixation.

W H Harris, J. Mccarthy, W. Harris, 1982, The Journal of bone and joint surgery. American volume.

Stress distributions in the acetabular region--II. Effects of cement thickness and metal backing of the total hip acetabular component.

D R Carter, W H Harris, D. Carter, 1982, Journal of biomechanics.

Micromotion of cemented and uncemented femoral components.

W H Harris, M Jasty, W. Harris, 1991, The Journal of bone and joint surgery. British volume.

Loosening of the femoral component of total hip replacement after plugging the femoral canal.

W H Harris, J. Mccarthy, W. Harris, 1982, The Hip.

Monitoring the integrity of the cement-metal interface of total joint components in vitro using acoustic emission and ultrasound.

W H Harris, J P Davies, M K Tse, 1996, The Journal of arthroplasty.

Will stress shielding limit the longevity of cemented femoral components of total hip replacement?

W H Harris, W. Harris, 1992, Clinical orthopaedics and related research.

Comparison of the fatigue characteristics of centrifuged and uncentrifuged simplex P bone cement

W H Harris, J. P. Davies, W. Harris, 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment.

W H Harris, B S Ramamurti, M Jasty, 1997, Journal of biomedical materials research.

Localized osteolysis in stable, non-septic total hip replacement.

W H Harris, W. Harris, A. Schiller, 1986, The Journal of bone and joint surgery. American volume.

The initiation of failure in cemented femoral components of hip arthroplasties.

W J Maloney, W H Harris, M Jasty, 1991, The Journal of bone and joint surgery. British volume.

Production of cytokines around loosened cemented acetabular components. Analysis with immunohistochemical techniques and in situ hybridization.

W H Harris, M Jasty, D. Jevsevar, 1993, The Journal of bone and joint surgery. American volume.

Periprosthetic femoral osteolysis around an uncemented nonmodular Moore prosthesis.

W H Harris, M Jasty, B S Bal, 1997, The Journal of arthroplasty.

Quantification of Implant Micromotion, Strain Shielding, and Bone Resorption With Porous‐Coated Anatomic Medullary Locking Femoral Prostheses

W H Harris, M Jasty, C. Engh, 1992, Clinical orthopaedics and related research.

Stress distributions in the acetabular region--I. Before and after total joint replacement.

D R Carter, W H Harris, D. Carter, 1982, Journal of biomechanics.

A finite element study of the effect of diametral interface gaps on the contact areas and pressures in uncemented cylindrical femoral total hip components.

T P Harrigan, W H Harris, W. Harris, 1991, Journal of biomechanics.

Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement.

J O Galante, W J Maloney, W H Harris, 1999, Clinical orthopaedics and related research.

Fit of the uncemented femoral component and the use of cement influence the strain transfer to the femoral cortex

T P Harrigan, W H Harris, M Jasty, 1994, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Evaluation of bone cement failure criteria with applications to the acetabular region.

D R Carter, W H Harris, D. Carter, 1983, Journal of biomechanical engineering.

Formation of a synovial-like membrane at the bone-cement interface. Its role in bone resorption and implant loosening after total hip replacement.

W H Harris, M Jasty, W. Harris, 1986, Arthritis and rheumatism.

Clinical and radiographic evaluation of total hip replacement. A standard system of terminology for reporting results.

R Poss, R C Johnston, W H Harris, 1990, The Journal of bone and joint surgery. American volume.

Contact pressures from an instrumented hip endoprosthesis.

R W Mann, R S Fijan, P O Riley, 1989, The Journal of bone and joint surgery. American volume.

In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty.

J O Galante, W H Harris, J. Galante, 2005, The Journal of arthroplasty.

The synovial-like membrane at the bone-cement interface in loose total hip replacements and its proposed role in bone lysis.

W H Harris, W. Harris, A. Schiller, 1983, The Journal of bone and joint surgery. American volume.

High assembly strains and femoral fractures produced during insertion of uncemented femoral components. A cadaver study.

W H Harris, M Jasty, W. Harris, 1993, The Journal of arthroplasty.

Bone ingrowth into porous coated canine acetabular replacements: the effect of pore size, apposition, and dislocation.

W H Harris, M Jasty, W. Harris, 1985, The Hip.

Is It Advantageous to Strengthen the Cement‐Metal Interface and Use a Collar for Cemented Femoral Components of Total Hip Replacements?

W H Harris, W. Harris, 1992, Clinical orthopaedics and related research.

A system for trochanteric osteotomy and reattachment for total hip arthroplasty with a ninety-nine percent union rate.

W H Harris, W. Harris, N F Jensen, 1986, Clinical orthopaedics and related research.

Centrifugation as a method of improving tensile and fatigue properties of acrylic bone cement.

W H Harris, W. Harris, D. Burke, 1984, The Journal of bone and joint surgery. American volume.

Differential effects of different forms of hydroxyapatite and hydroxyapatite/tricalcium phosphate particulates on human monocyte/macrophages in vitro.

W H Harris, W. Harris, M. Jasty, 1996, Journal of biomedical materials research.

High placement of porous-coated acetabular components in complex total hip arthroplasty.

W H Harris, W. Harris, S F Schutzer, 1994, The Journal of arthroplasty.

In vitro evaluation of bonding of the cement‐metal interface of a total hip femoral component using ultrasound

W H Harris, J P Davies, M K Tse, 1995, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Tensile bonding strength of the cement-prosthesis interface.

W H Harris, J. P. Davies, W. Harris, 1994, Orthopedics.

Elevated-rim acetabular components. Effect on range of motion and stability in total hip arthroplasty.

W H Harris, W. Harris, R. Krushell, 1991, The Journal of arthroplasty.

High placement of an acetabular component inserted without cement in a revision total hip arthroplasty. Results after a mean of ten years.

W H Harris, W. Harris, J T Dearborn, 1999, The Journal of bone and joint surgery. American volume.

Endosteal erosion in association with stable uncemented femoral components.

J O Galante, W J Maloney, W H Harris, 1990, The Journal of bone and joint surgery. American volume.

The Otto Aufranc Award. Skeletal response to well fixed femoral components inserted with and without cement.

W J Maloney, W H Harris, M Jasty, 1996, Clinical orthopaedics and related research.

A radio telemetry device for monitoring cartilage surface pressures in the human hip.

R W Mann, C. E. Carlson, W H Harris, 1974, IEEE transactions on bio-medical engineering.

Improved techniques for measuring in vitro the geometry and pressure distribution in the human acetabulum. II Instrumented endoprosthesis measurement of articular surface pressure distribution.

P. D. Rushfeldt, R W Mann, Robertw . Mann, 1981, Journal of biomechanics.

The effect of centrifuging bone cement.

T P Harrigan, W H Harris, M Jasty, 1989, The Journal of bone and joint surgery. British volume.

Osteolysis around uncemented acetabular components of cobalt-chrome surface replacement hip arthroplasty.

W H Harris, M Jasty, W. Harris, 1994, Clinical orthopaedics and related research.

Enhanced stability of uncemented canine femoral components by bone ingrowth into the porous coatings.

W H Harris, M Jasty, W. Harris, 1997, The Journal of arthroplasty.

The effect of centrifugation on the fatigue life of bone cement in the presence of surface irregularities.

W H Harris, M Jasty, W. Harris, 1988, Clinical orthopaedics and related research.

The influence of support conditions in the loading fixture on failure mechanisms in the push‐out test: A finite element study

T P Harrigan, W H Harris, J Kareh, 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Osteolysis and particle disease in hip replacement. A review.

W H Harris, W. Harris, 1994, Acta orthopaedica Scandinavica.

Loci of movement of selected points on the femoral head during normal gait. Three-dimensional computer simulation.

W H Harris, B S Ramamurti, D M Estok, 1996, The Journal of arthroplasty.

Surface damage to cobalt-chrome femoral head prostheses.

W H Harris, M Jasty, W. Harris, 1994, The Journal of bone and joint surgery. British volume.

Techniques for implementing an in vivo bone strain gage system.

D R Carter, W H Harris, D. Carter, 1981, Journal of biomechanics.

A finite element study of the initiation of failure of fixation in cemented femoral total hip components

T P Harrigan, W H Harris, W. Harris, 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The first 32 years of total hip arthroplasty. One surgeon's perspective.

W H Harris, W. Harris, 1992, Clinical orthopaedics and related research.

Association Between Hospital and Surgeon Procedure Volume and Outcomes of Total Hip Replacement in the United States Medicare Population*

R Poss, W H Harris, E. Guadagnoli, 2001, The Journal of bone and joint surgery. American volume.

Intraoperative measurement of rotational stability of femoral components of total hip arthroplasty.

H P Chandler, W J Maloney, W H Harris, 1991, Clinical orthopaedics and related research.

Allografting in total hip arthroplasty: in adults with severe acetabular deficiency including a surgical technique for bolting the graft to the ilium.

W H Harris, W. Harris, 1982, Clinical orthopaedics and related research.

Complex total hip replacement for dysplastic or hypoplastic hips using miniature or microminiature components.

W H Harris, W. Harris, S. Woolson, 1983, The Journal of bone and joint surgery. American volume.

Influence of cartilage geometry on the pressure distribution in the human hip joint.

R W Mann, W H Harris, R. Mann, 1979, Science.

Stress changes in the femoral head due to porous ingrowth surface replacement arthroplasty.

D R Carter, W H Harris, D. Carter, 1984, Journal of biomechanics.

Improved techniques for measuring in vitro the geometry and pressure distribution in the human acetabulum--I. Ultrasonic measurement of acetabular surfaces, sphericity and cartilage thickness.

P. D. Rushfeldt, R W Mann, W H Harris, 1981, Journal of biomechanics.

Histologic identification of polyethylene wear debris using Oil Red O stain.

W H Harris, M Jasty, T P Schmalzried, 1993, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

Total hip replacement and femoral-head bone-grafting for severe acetabular deficiency in adults.

W H Harris, W. Harris, I. Oh, 1977, The Journal of bone and joint surgery. American volume.

Polyethylene wear debris and tissue reactions in knee as compared to hip replacement prostheses.

W H Harris, M Jasty, T P Schmalzried, 1994, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

The Harris-Galante porous-coated acetabular component with screw fixation. Radiographic analysis of eighty-three primary hip replacements at a minimum of five years.

W H Harris, T P Schmalzried, W. Harris, 1992, The Journal of bone and joint surgery. American volume.

Proximal strain distribution in the loaded femur. An in vitro comparison of the distributions in the intact femur and after insertion of different hip-replacement femoral components.

W H Harris, W. Harris, I. Oh, 1978, The Journal of bone and joint surgery. American volume.

A three-dimensional non-linear finite element study of the effect of cement-prosthesis debonding in cemented femoral total hip components.

T P Harrigan, W H Harris, W. Harris, 1991, Journal of biomechanics.

Influence of intraoperative femoral fractures and cerclage wiring on bone ingrowth into canine porous-coated femoral components.

W H Harris, M Jasty, W. Harris, 1995, The Journal of arthroplasty.

Total hip arthroplasty with insertion of the acetabular component without cement in hips with total congenital dislocation or marked congenital dysplasia.

W H Harris, W. Harris, M J Anderson, 1999, The Journal of bone and joint surgery. American volume.

Traumatic disruption of cervical intervertebral disk from hyperextension injury.

W H Harris, D L Hamblen, R G Ojemann, 1968, Clinical orthopaedics and related research.

In vitro measurement of strain in the bone cement surrounding the femoral component of total hip replacements during simulated gait and stair‐climbing

W H Harris, M Jasty, W. Harris, 1996, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

A critical assessment of proximal macrotexturing on cemented femoral components.

W H Harris, W. Harris, O. Muratoglu, 2001, The Journal of arthroplasty.

The effect of improved cementing techniques on component loosening in total hip replacement. An 11-year radiographic review.

W H Harris, W. Harris, R. Mulroy, 1990, The Journal of bone and joint surgery. British volume.

Range of motion in contemporary total hip arthroplasty. The impact of modular head-neck components.

W H Harris, W. Harris, R. Krushell, 1991, The Journal of arthroplasty.

Wear and periprosthetic osteolysis: the problem.

W H Harris, W. Harris, 2001, Clinical orthopaedics and related research.

Histomorphological studies of the long-term skeletal responses to well fixed cemented femoral components.

W J Maloney, W H Harris, M Jasty, 1990, The Journal of bone and joint surgery. American volume.

A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award.

W H Harris, M Jasty, W. Harris, 2001, The Journal of arthroplasty.