Corina Maria Dinis

发表

Modern equipment for recording and analyzing the events in electric stations

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2010 .

Study about numerical relay SEL-387 for overcurrent and differential protections of 110/20 kV transformers

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2009, ICONS 2009.

Hierarchical control of a complex conveyors belt system

Gabriel Nicolae Popa, Corina Maria Dinis, Angela Iagâr, 2011 .

Numerical simulations of the electric parameters of the plate-type electrostatic precipitators supplied with DC voltage

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2016, 2016 International Conference and Exposition on Electrical and Power Engineering (EPE).

Study on sources of charging lead acid batteries

Gabriel Nicolae Popa, Corina Maria Dinis, A Iagăr, 2015 .

Software for hierarchycal control of materials transportation process

Gabriel Nicolae Popa, Corina Maria Dinis, A Iagăr, 2010 .

A case study of an analogical distance relay for the 110kV electric power lines

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2010 .

Simulation and Experimental Analysis of Non-Linear Loads from Residential and Educational Buildings

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2016 .

A prospective on power quality analyze of three sections plate-type electrostatic precipitator supplies

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2012 .

Improvement of Technological and Electric Performances for Plate- Type Electrostatic Precipitators with Three Sections

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2008 .

Study upon a wood processing automatic machine

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2010, ICIA 2010.

Assessment of power quality for line frequency coreless induction furnaces

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2009 .

Industrial application of low voltage bidirectional automatic release of reserve

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2018 .

Analysis the electrical parameters of a high-frequency coreless induction furnace

Gabriel Nicolae Popa, Corina Maria Dinis, A Iagăr, 2015 .

Research on temperature control with numerical regulators in electric resistance furnaces with indirect heating

Gabriel Nicolae Popa, Corina Maria Dinis, A Iagăr, 2016 .

An analogical distance relay for the 110kV electric lines

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2010 .

Astable multivibrator circuits made with low capacity PLC

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2016 .

On the use of a low voltage power factor controller in deforming regime

Gabriel Nicolae Popa, Corina Maria Dinis, Costel Paliciuc, 2013, 2013 4th International Symposium on Electrical and Electronics Engineering (ISEEE).

A numerical modeling of electric parameters from industrial plate-type electrostatic precipitator

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2011, 2011 IEEE International Conference on Industrial Technology.

Aspects regarding the fuzzy logic in the process control from the sintering plants

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2009, ICONS 2009.

Analysis of the commutation regime functioning of the IGBT transistor

Caius Panoiu, Corina Maria Dinis, Corina Daniela Cuntan, 2009, ICONS 2009.

Considerations on the Current Harmonics of Plate-Type Electrostatic Precipitators Power Supplies

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2013 .

Modelling of some parameters from thermoelectric power plants

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2016 .

Study of a phase-to-ground fault on a 400 kV overhead transmission line

Gabriel Nicolae Popa, Corina Maria Dinis, A Iagăr, 2018 .

Modeling of Electrical and Technological Parameters of Industrial Precipitators

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2013 .

Implementation of a numerical distance relay for the 110kV electric lines

Sorin Ioan Deaconu, Angela Iagar, Gabriel Nicolae Popa, 2009, ICONS 2009.

Determining start time for three-phase cage induction motors that drive belt transport conveyers

Angela Iagar, Gabriel Nicolae Popa, Corina Maria Dinis, 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.

The influence of home nonlinear electric equipment operating modes on power quality

Gabriel Nicolae Popa, Corina Maria Dinis, C. Diniș, 2014 .

Numerical modelling in plate-type electrostatic precipitator supplied with pulse energization

Sorin Ioan Deaconu, Gabriel Nicolae Popa, Corina Maria Dinis, 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.