Masato Suzuki

发表

1A1-K03 Development of flexible vacuum gripper using suction cups for absorbing free-form object(Robot Hand Mechanism and Grasping Strategy (1))

Satoshi Kikuchi, Tomokazu Takahashi, Masato Suzuki, 2013 .

Pneumatic Actuator with Vacuum Gripper Imitating Octopus Sucker

Tomokazu Takahashi, Masato Suzuki, Takuya Matsumoto, 2017 .

IEEE Symposium on Low-Power and High-Speed Chips

Josep Torrellas, Hideharu Amano, Masato Suzuki, 2011 .

Low-loss splice of large effective area fiber using fluorine-doped cladding standard effective area fiber

Masato Suzuki, Takemi Hasegawa, Yoshiaki Tamura, 2017, 2017 Optical Fiber Communications Conference and Exhibition (OFC).

3P1-S06 Development of Vacuum Gripper with valves to open by contact : Gripping and transporting a flat plate that does not depend on the area by a single gripper(Robot Hand Mechanism and Grasping Strategy (1))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2014 .

Micro-Watt Order Power Generation by Miniaturized Energy Harvester using Coatable PVDF Piezoelectric Thin Film

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

1P1-Q07 Development of vacuum gripper imitating octopus sucker : Effect of particle size on adsorption performance

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2015 .

Low Loss Splicing Between Coupled Multi-Core Fibers with Thermally Expanded Cores

Masato Suzuki, Tetsuya Hayashi, Takemi Hasegawa, 2018, 2018 Optical Fiber Communications Conference and Exposition (OFC).

The Proposal of a Robot Hand for Coping with Different Gripping Targets by Imitating Sucker-attached Fingers of Tree Frogs

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2018 .

Vacuum Gripper with Funnel and Filter for Grasping Flexible Objects: -Effect of funnel structure on grasping -@@@―漏斗構造の形状が把持に与える影響―

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

2A2-R01 Localization and mapping of Roomba robot using fluorescent light position information(Localization and Mapping)

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2014 .

1A2-A10 Design of guide for avoiding buckling fracture of micro needle inspired by labium of mosquito(Bio-Mimetics and Bio-Mechatronics (2))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

1A1-R08 Fabrication and Evaluation of Guide Tool for Inserting Needles to Skin Imitating Mosquito's Labium(Bio-Mimetics and Bio-Mechatronics(1))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2012 .

パラフィンのマイクロバルブとしての適用性の検討;パラフィンのマイクロバルブとしての適用性の検討;A Study of Availability of Paraffin Wax for Valve in Microfluidic Channel

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

2A1-U08 Development of autonomous indoor mobile robot : Travel to a desk and category recognition of objects on the table based on object shape concept

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2015 .

MP-54 Development and Evaluation of Micro Spring System to Reduce Crosstalk in MEMS Inertial Sensors : Direct Observation of Motion of Developed Spring-Mass System

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2011 .

Vacuum Gripper Imitating Funnel Shape and Micro Grooves of Octopus Suction Cup

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

Development of Vacuum Gripper Imitating Octopus Sucker

Satoshi Kikuchi, Tomokazu Takahashi, Masato Suzuki, 2013 .

3P1-S05 Development of vacuum gripper imitating adsorption mechanism of octopus sucker : Evaluation of adsorption performance of gripper(Robot Hand Mechanism and Grasping Strategy (1))

Satoshi Kikuchi, Tomokazu Takahashi, Masato Suzuki, 2014 .

Mechanism for Reduction of Pressing Force of Vacuum Gripper Imitating Octopus: - Reduction of pressing force by ball spline -@@@―ボールスプライン機構を用いた押付力軽減―

Masato Suzuki, Seiji Aoyagi, Takaya Aoyagi, 2017 .

2A2-M07 Application of Kinect v2 Sensor to a Mobile Robot and Its Characterization in the Outdoor Environment : Comparison with LRF

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2015 .

Vacuum gripper imitating octopus sucker with bellows structure: - Resistant effect of bellows structure against releasing object tilt in grasping -@@@―把持時の対象物の傾斜による剥離の抑制―

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2016 .

1A1-M03 Development of compact size mobile robot composed of omnidirectional platform and lightweight arm : calibration of arm kinematic parameters, autonomous movement to a desk, recognition and gripping of object on the desk(Robots for Home/Office Application)

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2014 .

Gas Turbine With Ceramic and Metal Components

Masato Suzuki, Takahiro Inoue, Takayuki Matsunuma, 2007 .

2A2-L02 Object recognition in the office using the AdaBoost classifier and three-dimensional point cloud data obtained by distance image sensor(Robot Vision(1))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2012 .

A study on fall-prevention system for older adults with communication robot

Masato Suzuki, Daisuke Kitakoshi, Kentarou Suzuki, 2017, 2017 International Conference on Biometrics and Kansei Engineering (ICBAKE).

1P1-R07 Study of vibration effect in puncture of mosquito's labrum : Non-linear FEM analysis and visualization of stress applied to skin

Tomokazu Takahashi, Masato Suzuki, Satoshi Yamaguchi, 2015 .

Lowest-ever 0.1419-dB/km loss optical fiber

Masato Suzuki, Takashi Fujii, Takemi Hasegawa, 2017, 2017 Optical Fiber Communications Conference and Exhibition (OFC).

2A2-J07 Recognition of office furniture and objects on desk using a depth map based on general shape concept(Robot Vision (2))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

1A1-L02 Development of MEMS-based Vacuum Adsorption Robot Hand Fitted on Free-form Surface(Robot Hand Mechanism and Grasping Strategy(1))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2012 .

10.16 Peta-bit/s Dense SDM/WDM transmission over Low-DMD 6-Mode 19-Core Fibre Across C+L Band

Takehiro Tsuritani, Masato Suzuki, Masatoshi Suzuki, 2017, 2017 European Conference on Optical Communication (ECOC).

Development of Nano-porous SiO 2 Electret with High Thermal Resistance and Its Application to Vibration Energy Harvester

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2015 .

Measurement of Force Grasping Flexible Objects by Vacuum Gripper

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

Small Diameter Suction Cup Imitating Octopus for Grasping Flexible Objects

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

Micro Gas Turbine With Ceramic Nozzles and Rotor: Part 2

Masato Suzuki, Takahiro Inoue, Takayuki Matsunuma, 2006 .

A-3 Tests and future tasks of a small gas turbine with ceramic

Masato Suzuki, Takahiro Inoue, Takayuki Matsunuma, 2007 .

Prototype of micro pneumatic tilt actuator

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2016 .

Fabrication of Metallic Microneedle by Electroplating and Sharpening of it by Electrochemical Etching

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2011 .

Development of biomimetic octopus vacuum gripper with separated suction cup array

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2016 .

Avoidance of multiple moving obstacles of mobile robot based on study of human obstacle avoidance by simulator

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2017 .

Channel Selective Wavelength Conversion by Means of Inter Modal Four Wave Mixing

Francesca Parmigiani, Periklis Petropoulos, David J. Richardson, 2019, 2019 Optical Fiber Communications Conference and Exhibition (OFC).

2A2-J06 Object extraction and recognition in a room using both of depth and color images obtained by Kinect(Robot Vision (2))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

Three dimensional movement of knee joint and its structure

Masato Suzuki, Hiroshi Suemasu, Yasunori Suda, 2003 .

1P1-U02 General object recognition in indoor environment using general concepts based on both object shape and co-occurrence(Robot Vision)

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2014 .

1P1-V03 Segmentation of overlapping objects in an image and their categorization(Robot Vision)

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2014 .

Octopus-inspired Vacuum Gripper with Water-filled Pad for Grasping Flexible Objects

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2018 .

1P1-Q06 Fabrication and performance evaluation of sucker imitating funnel structure of octopus

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2015 .

Micro Gas Turbine Firing Kerosene and Ammonia

Masato Suzuki, Takahiro Inoue, Takayuki Matsunuma, 2015 .

Grasping using Industrial Robotic Arm with Biomimetic Octopus Vacuum Gripper

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2018 .

2P1-K02 Development of Home Robot Based on RECS Concept : Task of Clearing the Table Using Protective Coloration Marks and Infrared Light(Integrating Ambient Intelligence)

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2011 .

Autonomous Distributed Environmental Monitoring Robot Using Insect-mountable Biofuel Cell

Masato Suzuki, Keisuke Morishima, Hiroyuki Ohno, 2016 .

7AM2-A-6 Development of puncture Jig for preventing from buckling of microneedle imitating labium of mosquito

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

1P2-W06 Autonomous Distributed Sensor Robots Using Insects : Driving Wireless Sensor Powered by Insect-mountable Biofuel Cell

Masato Suzuki, Keisuke Morishima, Hiroyuki Ohno, 2015 .

Wide-Band Intermodal Wavelength Conversion in a Dispersion Engineered Highly Nonlinear FMF

Naoya Wada, Benjamin J. Puttnam, Yoshinari Awaji, 2019, 2019 Optical Fiber Communications Conference and Exhibition (OFC).

1A1-L02 Fabrication of Micro Vacuum Gripper for gripping free-form Surface(Robot Hand Mechanism and Grasping Strategy (1))

Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, 2013 .

1P1-Q02 Development of vacuum gripper imitating denticles on the octopus sucker

Satoshi Kikuchi, Tomokazu Takahashi, Masato Suzuki, 2015 .