G. Kaltsas

发表

A multi-range PCB-MEMS microfluidic flow sensor with adjustable sensitivity

A. Petropoulos, Dimitris N. Pagonis, G. Kaltsas, 2011 .

A thermal convective accelerometer system based on a silicon sensor—Study and packaging

G. Kaltsas, D. Goustouridis, A. G. Nassiopoulou, 2006 .

A Portable Control and Measurement System for Thermal Sensors Interfacing

G. Kaltsas, Anastasios Moschos, 2016 .

Gas flow meter for application in medical equipment for respiratory control: study of the housing

G. Kaltsas, A. G. Nassiopoulou, 2004 .

Characterization of a silicon thermal gas-flow sensor with porous silicon thermal isolation

G. Kaltsas, A. G. Nassiopoulou, A. A. Nassiopoulos, 2002 .

A Silicon Thermal Accelerometer Without Solid Proof Mass Using Porous Silicon Thermal Isolation

G. Kaltsas, D. Goustouridis, A.G. Nassiopoulou, 2007, IEEE Sensors Journal.

Stabilization of power consumption of the heater of a micromachined silicon gas flow sensor

G. Kaltsas, A. G. Nassiopoulou, A. A. Nassiopoulos, 2001, ICECS 2001. 8th IEEE International Conference on Electronics, Circuits and Systems (Cat. No.01EX483).

Flow reattachment point detection via thermal sensors - PIVevaluation

G. Kaltsas, D. S. Mathioulakis, P. G. Kapiris, 2011 .

A CMOS compatible thermal accelerometer without solid proof mass, based on porous silicon thermal isolation

G. Kaltsas, D. Goustouridis, A.G. Nassiopoulou, 2004, Proceedings of IEEE Sensors, 2004..

Frontside bulk silicon micromachining using porous-silicon technology

G. Kaltsas, A. G. Nassiopoulou, 1998 .

Flexible PCB-MEMS Flow Sensor

A. Petropoulos, Dimitris N. Pagonis, G. Kaltsas, 2012 .

25th Anniversary Eurosensors XXV

G. Kaltsas, Christos Tsamis, 2012 .

A PCB Based Engine Air Intake Sensor – Application to a Typical Low Power Engine☆

G. Kaltsas, Anastasios Moschos, Dimitrios N. Pagonis, 2016 .

Multipurpose thermal sensor based on Seebeck effect

G. Kaltsas, Mirjana Popovic, Danijela Randjelovic, 2002, 2002 23rd International Conference on Microelectronics. Proceedings (Cat. No.02TH8595).

A novel thermal position sensor integrated on a plastic substrate

A. Petropoulos, G. Kaltsas, D. Goustouridis, 2007, 2007 13th International Workshop on Thermal Investigation of ICs and Systems (THERMINIC).

Bulk silicon micromachining using porous silicon sacrificial layers

G. Kaltsas, A. G. Nassiopoulos, 1997 .

A thermal accelerometer directly integrated on organic substrate

A. Petropoulos, G. Kaltsas, Anastasios Moschos, 2011 .

Micro-raman analysis of polysilicon membranes deposited on porous silicon channels

G. Kaltsas, A. G. Nassiopoulou, A. Nassiopoulou, 2000 .

Fabrication and testing of an integrated thermal flow sensor employing thermal isolation by a porous silicon membrane over an air cavity

G. Kaltsas, A. G. Nassiopoulou, A. Nassiopoulou, 2004 .

A novel microfluidic integration technology for PCB-based devices: Application to microflow sensing

Evangelos Gogolides, A. Petropoulos, G. Kaltsas, 2009 .

A novel microfabrication technology on organic substrates – application to a thermal flow sensor

Evangelos Gogolides, A. Petropoulos, G. Kaltsas, 2007 .

Porous Silicon Membranes over Cavity for Efficient Local Thermal Isolation in Si Thermal Sensors

G. Kaltsas, A. G. Nassiopoulou, D. N. Pagonis, 2004 .

Study of an integrated thermal sensor in different operational modes, under laminar, transitional and turbulent flow regimes

A. Petropoulos, G. Kaltsas, A. Petropoulos, 2008 .

Micro-Raman characterization of stress distribution within free standing mono- and poly-crystalline silicon membranes

G. Kaltsas, E. Anastassakis, G. Kaltsas, 1998 .

A thermal vacuum sensor fabricated on plastic substrate – Study in various operation modes

A. Petropoulos, G. Kaltsas, A. G. Nassiopoulou, 2008 .

A flexible capacitive device for pressure and tactile sensing

Evangelos Gogolides, A. Petropoulos, G. Kaltsas, 2009 .

Porous Silicon as an Effective Material for Thermal Isolation on Bulk Crystalline Silicon

G. Kaltsas, A. G. Nassiopoulou, A. Nassiopoulou, 2000 .

A wireless sensor network for building structural health monitoring and seismic detection

Evangelos Zervas, G. Kaltsas, P. Katsikogiannis, 2008 .

Modelling and evaluation of a thermal microfluidic sensor fabricated on plastic substrate

A. Petropoulos, G. Kaltsas, G. P. Patsis, 2012 .