Tetsuo Shoji

发表

Flash vacuum-ultraviolet source utilizing a surface-discharge substrate

Eiichi Sato, Toru Yanagisawa, Yoshiharu Tamakawa, 1993, Other Conferences.

Can we make quadratic surfaces by cylinder?

Tetsuo Shoji, Koro Shishido, Masao Sugiura, 1995, Optics & Photonics.

4017 Several Techniques for Improving the Detection Probability of the Magnetic Camera

Tetsuo Shoji, Jinyi Lee, Jiseong Hwang, 2006 .

Required precision of mirror surface for solar furnace

Yukio Shibata, Tetsuo Shoji, Koro Shishido, 1995, Optics & Photonics.

Road Extraction using Result of Divided K-Means Algorithm from Aerial Images

Yoshihiro Okada, Tetsuo Shoji, Kenji Murayama, 2003 .

Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components

Tetsuo Shoji, He Xue, Y. Sato, 2009 .

Failure Probability Analysis Based on FRI Model for Stress Corrosion Cracking Growth Introducing Residual Stress Distribution by Weld

Tetsuo Shoji, Noriyoshi Maeda, 2012 .

Evaluating Method of the Rigidity of Cable-Conduit Conductor of Superconducting Magnets for Fusion Reactor.

Tetsuo Shoji, Hiroki Nakayama, Koichi Kasaba, 1998 .

T0301-2-6 Investigation on Corrosion Process Mechanism of Turbine Blade by Computational Science

Tetsuo Shoji, Kunio Shiokawa, Mitsuo Yamashita, 2009 .

Development on Stress Monitoring Method for Measurement of Cyclic Stress of Railway Axles

Tetsuo Shoji, Kazuhiro Ogawa, Seok Jin Kwon, 2005 .

Simulation of Magneto-Optical Nondestructive Testing using Alternative Magnetic Field

Tetsuo Shoji, Jinyi Lee, Huy Minh Le, 2011 .

Crack Detection in Press Fit Railway Axle Using Induced Current Focusing Potential Drop Technique

Tetsuo Shoji, Seok Jin Kwon, 2004 .

Improvement of the dipole model of a surface crack

Tetsuo Shoji, Dorian Minkov, Jong Gi Lee, 2000 .

Fracture toughness tests of wheelset materials used in the Japanese Shinkansen express trains

Tetsuo Shoji, Kazuhiro Ogawa, J Dzugan, 2004 .

Nondestructive Detection and Evaluation of Materials Degradation of 2.25Cr-1Mo Steel by means of Electrochemical Method

Yutaka Watanabe, Tetsuo Shoji, 1990 .

Application of a New NDI Method using Magneto-Optical Film for Inspection of Micro-Cracks

Tetsuo Shoji, Hyoung-No Lee, Han-Ju Park, 2001 .

Surface Crack Growth Behavior in Corrosion Fatigue of Off-Shore Structural Steel

Tetsuo Shoji, Se Hi Chung, H. Takahashi, 1990 .

Materials Ageing Degradation Programme in Japan and Proactive Ageing Management in NPP

Tetsuo Shoji, 2013 .

Application of a NDI method using magneto-optical film for micro-cracks

Jae-Kyoo Lim, Tetsuo Shoji, Jinyi Lee, 2002 .

Aspect of glass softening by master mold

Tetsuo Shoji, Koro Shishido, Masao Sugiura, 1995, Optics & Photonics.

Eddy Current Monitoring Aiming at Evaluation of Crack Propagation in Structural Components of Nuclear Power Plants

Takeshi Okuyama, Toshiyuki Takagi, Tetsuo Shoji, 2004 .

Non-destructive evaluation of fatigue and creep-fatigue damage by means of the induced-current focused potential drop technique

Tetsuo Shoji, Y. Sato, Y. Takeda, 2001 .

Repetitive compact flash x-ray generators for soft radiography

Eiichi Sato, Toru Yanagisawa, Yoshiharu Tamakawa, 1993, Other Conferences.

Theoretical consideration of nondestructive testing by use of vertical magnetization and magneto-optical sensor

Tetsuo Shoji, T. Shoji, Jinyi Lee, 2004 .

Detection and evaluation of the depth of surface cracks in conductive materials by using a loop antenna

Tetsuo Shoji, Kinji Tamakawa, Dorian Minkov, 2003 .

Method for sizing of 3-D surface breaking flaws by leakage flux

Tetsuo Shoji, Dorian Minkov, 1998 .

Aging of High Speed Train Wheelsets and its Quantitative Characteristics Based on Fracture Mechanics for Optimization of In-Service Inspection

Tetsuo Shoji, Kazuhiro Ogawa, K. Ogawa, 2004 .

Development of a Stress Corrosion Cracking Test Methodology Using Tube-shaped Specimens

Xue He, Tetsuo Shoji, Yoichi Takeda, 2007 .

Properties of oxide films formed on 316L SS and model alloys with modified Ni, Cr and Si contents in high temperature water

Tetsuo Shoji, Guangdong Han, Junjie Chen, 2016 .

Study of the dipole model of a crack

Tetsuo Shoji, Dorian Minkov, J. Lee, 2000 .

On the corrosion behavior of zircaloy-4 in spent fuel pools under accidental conditions

Tetsuo Shoji, Olivier Lavigne, T. Shoji, 2012 .

Development of a Multiple Linear Regression Model to Estimate the Ductile-Brittle Transition Temperature of Ferritic Low-Alloy Steels Based on the Relationship Between Small Punch and Charpy V-Notch Tests

Tetsuo Shoji, Hideaki Takahashi, Takashi Matsushita, 2000 .

Intergranular Environmentally Assisted Cracking of Alloy 182 Weld Metal in Simulated Normal Water Chemistry of Boiling Water Reactor

Tetsuo Shoji, Yoichi Takeda, Y. Takeda, 2007 .

Study of crack inversions utilizing dipole model of a crack and Hall element measurements

Tetsuo Shoji, Dorian Minkov, Jinyi Lee, 2000 .

Effects of Water Flow Rate on Fatigue Life of Structural Steels Under Simulated BWR Environment

Tetsuo Shoji, Akihiko Hirano, Katsumi Sakaguchi, 2007 .

Numerical Consideration of Magnetic Camera for Quantitative Nondestructive Evaluation

Tetsuo Shoji, Do Won Seo, Jin Yi Lee, 2004 .

Estimating the sizes of surface cracks based on Hall element measurements of the leakage magnetic field and a dipole model of a crack

Tetsuo Shoji, Yoichi Takeda, D. Minkov, 2002 .

Quantitative prediction of environmentally assisted cracking based on a theoretical model and computer simulation

Tetsuo Shoji, Shun-ichi Suzuki, T. Shoji, 1998 .

Modeling of Characteristics of Magneto-Optical Sensor Using FEM and Dipole Model for Nondestructive Evaluation

Tetsuo Shoji, Jae Kyoo Lim, Ji Seoung Hwang, 2005 .

The evaluation of in-service materials degradation of low-alloy steels by the electrochemical method

Yutaka Watanabe, Tetsuo Shoji, T. Shoji, 1991 .

Novel NDI by Use of Magneto-Optical Film.

Tetsuo Shoji, Dorian Minkov, Michiaki Ishihara, 1998 .

Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water

Tetsuo Shoji, T. Shoji, Qunjia Peng, 2004 .

Numerical Analysis of Magneto-Optical Eddy Current Imaging Using FEM

Tetsuo Shoji, Jin Yi Lee, Ji Seong Hwang, 2006 .

Quantitative prediction of EAC crack growth rate of sensitized type 304 stainless steel in boiling water reactor environments based on EPFEM

Tetsuo Shoji, He Xue, T. Shoji, 2007 .

The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water

Seiya Yamazaki, Tetsuo Shoji, Yoichi Takeda, 2008 .

A simulation of magneto-optical eddy current imaging

Minhhuy Le, Tetsuo Shoji, T. Shoji, 2011 .

Fatigue crack growth under compressive loading

Tetsuo Shoji, T. Shoji, Tadashi Sato, 1998 .

Effect of pH value on the fretting wear behavior of Inconel 690 alloy

Tetsuo Shoji, Yonghao Lu, T. Shoji, 2016 .