Goran Cukor

发表

Examination and Modelling of the Influence of Cutting Parameters on the Cutting Force and the Surface Roughness in Longitudinal Turning

Drazen Bajic, Branimir Lela, Goran Cukor, 2008 .

Modelling of Cutting Forces in Milling by Using Evolutionary Algorithms

Goran Cukor, Elso Kuljanić, M. Sortino, 2007 .

Optimization of turning using evolutionary algorithms

Zoran Jurković, Goran Cukor, 2010 .

Optimisation of Cutting Parameters for Longitudinal Turning of Inox-Steel

Goran Cukor, Predrag Kulaš, 2003 .

Application of the CAD/CAM System in the Production of the Anatomic Insole

Goran Cukor, Sven Maričić, Andrej Borić, 2015 .

MAGMA software in casting process of aluminum parts

Zoran Jurković, Goran Cukor, Dalibor Jakac, 2013 .

Determination of optimal cutting parameters to improve surface roughness based on different optimization approaches

Zoran Jurković, Goran Cukor, Tomislav Meštrović, 2008 .

APPLICATION OF MODELING AND SIMULATION IN REENGINEERING OF MANUFACTURING PROCESSES

Miran Brezocnik, Milan Jurković, Milenko Sekulić, 2014 .

Optimisation Strategy for Laser Beam Cutting

Antun Stoić, Goran Cukor, 2002 .

Genetic Algorithm Application in Optimization of Extrusion Forming Process

Milan Jurković, Zoran Jurković, Goran Cukor, 2005 .

OPTIMIZATION OF MACHINING PROCESS USING EVOLUTIONARY ALGORITHMS

Branimir Barišić, Goran Cukor, Elso Kuljanić, 2005 .

Tool Condition Monitoring and Control

Janez Kopac, Goran Cukor, Antun Stoić, 2003 .

SIMULATION OF PRODUCT LOGISTIC, INVESTIGATION OF FACILITY LAYOUT CAPABILITIES

Zlatan Car, Marko Kršulja, Goran Cukor, 2011 .

A Method for the Stochastic Modelling of Tool Life

Goran Cukor, 2000 .

Optimization of Turning Tool Geometry by Nonlinear Programming

Milan Jurković, Goran Cukor, 1999 .

Rotatable central composite design of experiments versus Taguchi method in the optimization of turning

Milenko Sekulić, Zoran Jurković, Goran Cukor, 2011 .

Estimate of consumed energy at backward extrusion process by means of modelling approach

Branimir Barišić, Goran Cukor, Miljenko Math, 2004 .

Solving the Face Milling Optimisation Problem by Evolutionary Algorithm

Goran Cukor, Antun Stoić, 2003 .

Multi-Response Optimization of X20Cr13 Steel Turning Under Vortex Tube Cooling Using Grey Relational Analysis

Zoran Jurković, Goran Cukor, Tihana Kostadin, 2017 .

Selection Program Of Alternative Process Plans

Goran Cukor, Juraj Ljubetić, 1999 .

OPTIMIZACIJA TOKARENJA UPORABOM EVOLUCIJSKIH ALGORITAMA OPTIMIZATION OF TURNING USING EVOLUTIONARY ALGORITHMS

Goran Cukor, 2010 .

A comparison of machine learning methods for cutting parameters prediction in high speed turning process

Miran Brezocnik, Goran Cukor, Zoran Jurkovic, 2016, Journal of Intelligent Manufacturing.

Stochastic Modelling And Optimization Of Tool Cutting Geometry For Turning

Milan Jurković, Zoran Jurković, Goran Cukor, 1998 .

Determination of Appropriate Cutting Parameters for Turning a Rotor

Goran Cukor, Marino Knežević, 2004 .

MULTI-RESPONSE OPTIMIZATION OF TURNING PARAMETERS USING THE GREY-BASED TAGUCHI METHOD

Milenko Sekulić, Zoran Jurković, Goran Cukor, 2015 .

IMPROVING THE SURFACE ROUGHNESS AT LONGITUDINAL TURNING USING THE DIFFERENT OPTIMIZATION METHODS

Zoran Jurković, Goran Cukor, Imrich Andrejcak, 2010 .

Analysis of corrosion resistance when turning martensitic stainless steel X20Cr13 under chilled air-cooling

Goran Cukor, Suzana Jakovljević, Tihana Kostadin, 2017 .

Adaptation to the Bologna Process at the Faculty of Engineering of the University of Rijeka

Tonči Mikac, Goran Cukor, 2007 .

Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm

Janez Kopac, Goran Cukor, Antun Stoić, 2005 .