Xuefeng Chen

发表

Design and Experiment of 1LFQ-325 Pneumatic Reversible Plough

Xuan Zheng, Xuefeng Chen, Chaomin Qin, 2013 .

Modeling and active vibration control of a coupling system of structure and actuators

Xuefeng Chen, Jinxin Liu, Xingwu Zhang, 2016 .

Zoom synchrosqueezing transform-based chatter identification in the milling process

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2018, The International Journal of Advanced Manufacturing Technology.

Model predictive control based active chatter control in milling process

Xuefeng Chen, Ruqiang Yan, Denghui Li, 2019, Mechanical Systems and Signal Processing.

Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators

Hongrui Cao, Xuefeng Chen, Kai Zhou, 2015 .

Hybrid two‐step method of damage detection for plate‐like structures

Huihui Miao, Yong Xie, Xuefeng Chen, 2016 .

Crack detection in a shaft by combination of wavelet-based elements and genetic algorithm

Zhengjia He, Jiawei Xiang, Yongteng Zhong, 2008 .

A chatter mitigation technique in milling based on H∞-ADDPMS and piezoelectric stack actuators

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2018, The International Journal of Advanced Manufacturing Technology.

System-on-chip for mega-pixel digital camera processor with auto control functions

Zhiliang Hong, Jie He, Xuefeng Chen, 2003, ASICON 2003.

Learning Handwritten Digit Recognition by the Max-Min Posterior Pseudo-Probabilities Method

Yunde Jia, Xiabi Liu, Xuefeng Chen, 2007 .

Characteristics of in-fiber Mach-Zehnder interferometer formed by lateral offset splicing

Xiujuan Yu, Shengchun Liu, Ge Li, 2012, Photonics Asia.

Chatter detection based on synchrosqueezing transform and statistical indicators in milling process

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2018 .

A 0.18 amu;m CMOS 10-Gb/S multichannel transmitter with duty-cycle correction

Zhiliang Hong, Yihui Chen, Xuefeng Chen, 2003, ASICON 2003.

Stiffness variation method for milling chatter suppression via piezoelectric stack actuators

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2018 .

Design of an Instrument Guide for MRI-Guided Percutaneous Interventions

Kemal Tuncali, Conor J. Walsh, Alexander H. Slocum, 2011 .

A guided wave dispersion compensation method based on compressed sensing

Xuefeng Chen, Zhibo Yang, Caibin Xu, 2018 .

Model Predictive Control Based Chatter Suppression in Milling Process via Piezoelectric Stack Actuators

Hongrui Cao, Xuefeng Chen, Denghui Li, 2018 .

A hybrid multiple damages detection method for plate structures

Bing Li, Jiawei Xiang, Xuefeng Chen, 2017 .

Damage identification for plate-like structures using ultrasonic guided wave based on improved MUSIC method

Xuefeng Chen, Hao Zuo, Caibin Xu, 2018, Composite Structures.

A 50Gb/s PAM-4 Retimer-CDR + VCSEL Driver with Asymmetric Pulsed Pre-Emphasis Integrated into a Single CMOS Die

Yuan Li, Lei Wang, Xin Wang, 2019, 2019 Optical Fiber Communications Conference and Exhibition (OFC).

Analysis and compensation of reference frequency mismatch in multiple-frequency feedforward active noise and vibration control system

Xuefeng Chen, Xingwu Zhang, Liangdong Yang, 2017 .

The assessment of active vibration isolation performance of rotating machinery using power flow and vibrational energy: Experimental investigation

Baijie Qiao, Xuefeng Chen, Jinxin Liu, 2016 .

Zoom synchrosqueezing transform and iterative demodulation: Methods with application

Shibin Wang, Hongrui Cao, Xuefeng Chen, 2016 .

Multiple-harmonic amplitude and phase control method for active noise and vibration reshaping

Xuefeng Chen, Laihao Yang, Xingwu Zhang, 2018 .

Stability-based selection of cutting parameters to increase material removal rate in high-speed machining process

Hongrui Cao, Xuefeng Chen, Kai Zhou, 2016 .

Wave propagation of laminated composite plates via GPU-based wavelet finite element method

Yu Sun, Xuefeng Chen, Zhibo Yang, 2017 .

Adaptive vibration reshaping based milling chatter suppression

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2019, International Journal of Machine Tools and Manufacture.

Early chatter detection in end milling based on multi-feature fusion and 3σ criterion

Kai Zhou, Hongrui Cao, Xuefeng Chen, 2017 .

A damage identification approach for plate structures based on frequency measurements

Zhengjia He, Jie Yu, Rui Liu, 2013 .

Milling force identification from acceleration signals using regularization method based on TSVD in peripheral milling

Baijie Qiao, Hongrui Cao, Xuefeng Chen, 2018 .

A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element

Yamin Li, Hongrui Cao, Hongrui Cao, 2016 .

Chatter detection in milling process based on synchrosqueezing transform of sound signals

Hongrui Cao, Xuefeng Chen, Xingwu Zhang, 2017 .

A Fully-Integrated 25Gb/s Low-Noise TIA+CDR Optical Receiver designed in 40nm-CMOS

Xin Wang, Hao Yan, Chang Liu, 2018, 2018 IEEE Asian Solid-State Circuits Conference (A-SSCC).

Active control of dynamic frequency responses for shell structures

Zhengjia He, Xuefeng Chen, Xingwu Zhang, 2015 .

Foreign Object Damage Diagnosis of Aero-Engine Compressor Based on Damping Averaging Built-in Matrix Method

Zhibin Zhao, Xuefeng Chen, Zhi Zhai, 2018 .

Robust active control based milling chatter suppression with perturbation model via piezoelectric stack actuators

Hongrui Cao, Xuefeng Chen, Jinxin Liu, 2019, Mechanical Systems and Signal Processing.