H Fessler

发表

Assembly stresses and deflection of conical-faced flanges without gaskets

Thomas H. Hyde, H Fessler, L V Lewis, 1991 .

A compilation of problems and needs in the analysis, design, and manufacture of pressure vessels

H Fessler, Philip E. Stanley, 1967 .

A Method for Assessing the Rollover Stability of Articulated Tipping Trailer Units under Tipping Conditions

H Fessler, T H Hyde, S G Pickering, 1994 .

The collection of photoelastic data

H Fessler, H. Fessler, 1968 .

STRESS DISTRIBUTIONS IN SCREWED TUBULAR JOINTS FOR THE PETROLEUM INDUSTRY

H Fessler, T P Broadbent, 1991 .

A model technique for bending strength of tubular joints

Thomas H. Hyde, H Fessler, W Hassell, 1992 .

A contribution to the stress analysis of piston pins

H Fessler, H B Padgham, 1966 .

Stresses in a bottoming stud assembly with chamfers at the ends of the threads

H Fessler, P K Jobson, 1983 .

PARAMETRIC EQUATIONS FOR THE FLEXIBILITY MATRICES OF MULTI-BRACE TUBUL AR JOINTS IN OFFSHORE STRUCTURES.

H Fessler, Pb Mockford, Jj Webster, 1986 .

A design exercise for a ceramic turbine disc subjected to centrifugal stresses

H Fessler, P Stanley, A. D. Sivill, 1978 .

BENDING STRESSES IN NON-OVERLAPPED TUBULAR K-JOINTS

H Fessler, K S Elliott, 1988 .

STRESS CONCENTRATIONS IN CAST CORNER JOINTS OF TUBULAR STRUCTURES

H Fessler, C D Edwards, 1985 .

Stresses at keyway ends near shoulders

H Fessler, P Stanley, C C Rogers, 1969 .

The use of model materials to simulate creep behaviour

Thomas H. Hyde, H Fessler, 1994 .

Determination of the Initial Gaps between Flat Flanges without Gaskets

Thomas H. Hyde, H Fessler, L V Lewis, 1987 .

,PARAMETRIC EQUATIONS FOR THE FLEXIBILITY MATRICES OF MULTI-BRACE TUBUL AR JOINTS IN OFFSHORE STRUCTURES. DISCUSSION ON PAPER 9124

H Fessler, Pb Mockford, Jj Webster, 1987 .

Stresses in cylindrical pressure vessels with end closures previously shaped by free explosive forming

H Fessler, T E Thorpe, H. Fessler, 1970 .

Stresses in torispherical drumheads: A critical evaluation

H Fessler, P Stanley, H. Fessler, 1966 .

Effect of Reduction of Payload on Stability During Tipping of Granular Materials

H Fessler, T H Hyde, W Sun, 1993 .

Wind Loading on Articulated Trailers During Tipping

H Fessler, T H Hyde, W Sun, 1995 .

Ratchetting tests of a stepped beam under steady tension and cycling bending

Thomas H. Hyde, H Fessler, 1985 .

Stress analysis of some unsymmetric screwed connections

H Fessler, Wang Jiong-Hua, 1984 .

Photoelastic Determination of Elastic and Plastic—Elastic Strain Distributions in Tube Plates

H Fessler, T H Hyde, J K Musson, 1994 .

Bolting and loss of contact between cylindrical flat-flanged joints without gaskets

Thomas H. Hyde, H Fessler, L V Lewis, 1988 .

Shouldered plates and shats in tension and torsion

H Fessler, P Stanley, H. Fessler, 1969 .

Stresses and deformations in overlapped diesel engine crankshafts, Part 1: Experimental results

Nicholas A. Warrior, Thomas H. Hyde, H Fessler, 1998 .

Stresses at end-milled keyways in plain shafts subjected to tension, bending, and torsion

H Fessler, P Stanley, C C Rogers, 1969 .

Elasto-plastic and creep behaviour of axially loaded, shouldered tubes

Thomas H. Hyde, H Fessler, J. J. Webster, 1980 .

Friction in Femoral Prosthesis and Photoelastic Model Cone Taper Joints

H Fessler, H. Fessler, D. Fricker, 1989, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Stress distribution in gudgeon pins

Thomas H. Hyde, H Fessler, 1997 .

In-line digital holographic interferometry.

H J Tiziani, H Fessler, G Pedrini, 1998, Applied optics.

Leakage Through Loaded Flat-Flanged Joints without Gaskets

Thomas H. Hyde, H Fessler, L V Lewis, 1988 .

Elastic stresses due to torque transmitted through the prismatic part of keyed connections part II: Effect of shape with usual fits and friction

H Fessler, M Eissa, 1982 .

A Study of Stresses in Alumina Universal Heads of Femoral Prostheses

H Fessler, H. Fessler, D. Fricker, 1989, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Axial stresses in cylindrical tube-plates

H Fessler, 1968 .

Stress distribution in a tee junction of thick pipes

H Fessler, H. Fessler, B H Lewin, 1956 .

An assessment of frozen stress photoelasticity

H Fessler, 1992 .

Plastic-Elastic strains in two-dimensional sections of partial-penetration fillet welds

Carmine Pappalettere, H Fessler, C. Pappalettere, 1989 .

Stress concentrations on axially loaded, unsymmetrical projections on flat bars

H Fessler, P J Woods, 1982 .

A study of large strains and the effect of different values of Poisson's ratio

H Fessler, H. Fessler, B H Lewin, 1960 .

Stresses in torispherical drumheads: A photoelastic investigation

H Fessler, P Stanley, H. Fessler, 1965 .

Precision casting of epoxy-resin photoelastic models

H Fessler, H. Fessler, M Perla, 1973 .

The Unit Strength Concept in the Interpretation of Beam Test Results for Brittle Materials

H Fessler, P Stanley, A. D. Sivill, 1976 .

The effect of regrinding bearing surfaces on stresses in overlapped crankshafts

H Fessler, T H Hyde, A P Sime, 1998 .

On the effect of key edge shape on keyway edge stresses in shafts in torsion

H Fessler, T Appavoo, 1989 .

Contact stresses in toroids under radial loads

H Fessler, E Ollerton, H. Fessler, 1957 .