Martin Steinert

发表

A STANDARDIZED MEASUREMENT TOOL FOR EVALUATING AND COMPARING TEAM REFRAMING CAPABILITIES

Gregory Kress, Mark Schar, Martin Steinert, 2012 .

Bringing Reality Back to Virtual Reality - A Collaborative Tool for Multidisciplinary Teams

Martin Steinert, Sampsa Kohtala, Thomas Kaland, 2020 .

A Framework for Reflective Practice in Innovative Design

Martin Steinert, Rebecca Currano, 2012 .

Using Low-Cost Sensors to Develop a High Precision Lifting Controller Device for an Overhead Crane—Insights and Hypotheses from Prototyping a Heavy Industrial Internet Project

Martin Steinert, Petri Kuosmanen, Heikki Sjöman, 2018, Sensors.

ON THE STABILITY OF COORDINATION PATTERNS IN MULTIDISCIPLINARY DESIGN PROJECTS

Martin Steinert, Warren Seering, Joao Castro, 2011 .

Messing with boundaries - quantifying the potential loss by pre-set parameters in topology optimization

Martin Steinert, Evangelos Tyflopoulos, 2019 .

Introducing the wayfaring approach for the development of human experiments in interaction design and engineering design science

Martin Steinert, Stephanie Balters, Kittil Kittilsen Leikanger, 2016 .

An Expert Model on Barriers to Implement Mobile Data Services

Martin Steinert, M. Steinert, 2006, 2006 International Conference on Mobile Business.

The Crux of Integration Prototyping in Complex Environments

Martin Steinert, Heikki Sjöman, Johan Chr. W. Hjorth, 2020 .

Mobile Computing and Commerce Framework

Martin Steinert, Stephanie Teufel, Patrick S. Merten, 2009 .

The Value of Prototypes in the Early Design and Development Process

Martin Steinert, Andre Liem, Siti Salwa Isa, 2015 .

The European Mobile Data Service Dilemma - An empirical analysis on the barriers of implementing mobile data services

Martin Steinert, Stephanie Teufel, 2005, MOBIS.

Digitally Capturing Physical Prototypes During Early-Stage Engineering Design Projects for Initial Analysis of Project Output and Progression

Martin Steinert, Torgeir Welo, Jorgen F. Erichsen, 2019, 1905.01950.

AnalyzeD: A Virtual Design Observatory, Project Launch Year

Martin Steinert, Larry Leifer, Rebecca Currano, 2012 .

Increasing student confidence and motivation in a project-based Machine Construction and Mechatronics course

Martin Steinert, Knut Einar Aasland, Kristoffer Slåttsveen, 2016 .

The Origins of Design Thinking and the Relevance in Software Innovations

Martin Steinert, Matilde Bisballe Jensen, Federico Lozano, 2016, PROFES.

Open ended problems - An robot programming experiment design to compare and test different development and design approaches

Martin Steinert, Achim Gerstenberg, 2018 .

User-Centered Innovation for the Design and Development of Complex Products and Systems

Martin Steinert, Lauren Aquino Shluzas, Riitta Katila, 2014 .

The Fuzzy Front End: Concept Development in the Automotive Industry

Martin Steinert, Torgeir Welo, Christer W. Elverum, 2014 .

From Hand-Drawn Sketching to Laser Cutting - A Proof of Concept Prototype and Pilot Study

Martin Steinert, Sampsa Kohtala, 2019 .

Iteration-based Performance Measurement in the Fuzzy Front End of PDPs

Mirko Meboldt, Martin Steinert, Johannes Heck, 2016 .

DISTRIBUTED EXPERIMENTS IN DESIGN SCIENCES, A NEXT STEP IN DESIGN OBSERVATION STUDIES?

Martin Steinert, Torgeir Welo, Joona Kurikka, 2015 .

Generating a network of information dependencies automatically

Martin Fischer, Martin Steinert, R. R. Senescu, 2012 .

Towards Understanding Startup Product Development as Effectual Entrepreneurial Behaviors pdf

Pekka Abrahamsson, Martin Steinert, Yngve Dahle, 2017, ICSOB.

A comparative study between traditional topology optimization and lattice optimization for additive manufacturing

Martin Steinert, Evangelos Tyflopoulos, M. Steinert, 2020 .

A Modular Research Platform – Proof-of-Concept of a Flexible Experiment Setup Developed for Rapid Testing of Simulators, UIs and Human Physiology Sensors

Martin Steinert, Henrikke Dybvik, John Chen, 2020 .

Advancing empirical evidence of iteration stereotypes in the fuzzy front end of product development processes

Mirko Meboldt, Martin Steinert, Johannes Heck, 2020 .

Capturing emotion reactivity through physiology measurement as a foundation for affective engineering in engineering design science and engineering practices

Martin Steinert, Stephanie Balters, M. Steinert, 2017, J. Intell. Manuf..

PHOTOGRAPHY - A NEW TOOL IN NEEDFINDING

Martin Steinert, Stephanie Balters, Andreas Wulvik, 2015 .

State of the Art of Makerspaces - Success Criteria When Designing Makerspaces for Norwegian Industrial Companies

Martin Steinert, Matilde Bisballe Jensen, Carl Christian Sole Semb, 2016 .

Creating your Own Tools: Prototyping Environments for Prototype Testing

Martin Steinert, Håvard Vestad, M. Steinert, 2019, Procedia CIRP.

Automatic Alert System: Improving Information Management on Construction Projects

Martin Fischer, Martin Steinert, Tyler Bushnell, 2013 .

Effortless capture of design output a prerequisite for building a design repository with quantified design output

Martin Steinert, Torgeir Welo, Heikki Sjöman, 2017, 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC).

Creating Dynamic Requirements through Iteratively Prototyping Critical Functionalities

Martin Steinert, Jørgen Blindheim, Carlo Kriesi, 2016 .

Design Loupes: A Bifocal Study to Improve the Management of Engineering Design Innovation by Co-evaluation of the Design Process and Information Sharing Activity

Martin Steinert, Larry Leifer, Rebecca Currano, 2012 .

The Relevance of Testing in Engineering Product Development - Investigations on a Robot Programming Task

Martin Steinert, Achim Gerstenberg, 2019 .

Experiences from a positivistic way of teaching in the fuzzy front end

Martin Steinert, Knut Einar Aasland, Kristoffer Slåttsveen, 2018 .

Learning in Product Development: Proposed Industry Experiment Using Reflective Prototyping

Martin Steinert, Torgeir Welo, Jorgen Andreas Bogen Erichsen, 2016 .

Explaining the (non) adoption and use of interactive voice response (IVR) among small and medium-sized enterprises

Martin Steinert, Caroline Kähr, M. Steinert, 2011, Int. J. Speech Technol..

Inaugural Editorial: Experimentation in Innovation Studies

Julian Birkinshaw, Martin Steinert, Saku J. Mäkinen, 2015 .

Large-scale engineering prototyping - Approaching complex engineering problems CERN-style

Martin Steinert, Achim Gerstenberg, 2017 .

Prototyping shape-changing interfaces - An evaluation of living hinges’ abilities to resemble organic, shape-changing interfaces

Martin Steinert, Matilde Bisballe Jensen, Jřrgen Blindheim, 2017 .

Space Utilization Patterns and Workshop Furniture: Affordances for New Product Development and Design

Mirko Meboldt, Martin Steinert, Johannes Heck, 2016 .

PHYSIOLOGY AND SENSORIAL BASED QUANTIFICATION OF HUMAN-OBJECT INTERACTION–THE QOSI MATRIX

Martin Steinert, Stephanie Balters, Matilde Bisballe Jensen, 2015 .

User research enabled by makerspaces: bringing functionality to classical experience prototypes

Martin Steinert, Matilde Bisballe Jensen, M. Steinert, 2020, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

Dancing with ambiguity: Causality behavior, design thinking, and triple-loop-learning

Martin Steinert, Larry J. Leifer, L. Leifer, 2011, Inf. Knowl. Syst. Manag..

Fixation on premature concept choices - a pitfall of early prototyping?

Martin Steinert, Heikki Sjöman, Achim Gerstenberg, 2019 .

Concept evaluation in new product development

Martin Steinert, Torgeir Welo, Jørgen Blindheim, 2020 .

Evaluating and Optimizing Chaotically Behaving Mobile Robots with a Deterministic Simulation

Martin Steinert, Achim Gerstenberg, 2019 .

A Simultaneous, Multidisciplinary Development and Design Journey - Reflections on Prototyping

Pekka Abrahamsson, Martin Steinert, Heikki Sjöman, 2015, ICEC.

Eliciting unknown unknowns with prototypes: Introducing prototrials and prototrial-driven cultures

Martin Steinert, Christer W. Elverum, Matilde Bisballe Jensen, 2017 .

Towards Understanding Startup Product Development as Effectual Entrepreneurial Behaviors

Pekka Abrahamsson, Martin Steinert, Yngve Dahle, 2017, PROFES.

The Breathing Room: Breathing Interval and Heart Rate Capturing through Ultra Low Power Radar

Martin Steinert, Dag T. Wisland, Heikki Sjöman, 2018, CHI Extended Abstracts.

Educating entrepreneurs in practical methods with design practices as a guide

Martin Steinert, Gunnar Andersson, Matthew Lynch, 2016 .

A computational approach to expose conversation dynamics in engineering design activities

Martin Steinert, Axel Menning, Andreas Wulvik, 2017 .

Assessing driver cortical activity under varying levels of automation with functional near infrared spectroscopy

Wendy Ju, Martin Steinert, Stephanie Balters, 2017, 2017 IEEE Intelligent Vehicles Symposium (IV).

Integration of low-cost, dry-comb EEG-electrodes with a standard electrode cap for multimodal signal acquisition during human experiments

Martin Steinert, Henrikke Dybvik, Christian Kuster Erichsen, 2020 .

Building agile design teams

Martin Steinert, Matteo Vignoli, Gabriele Ferioli, 2013 .

Why did my car just do that? Explaining semi-autonomous driving actions to improve driver understanding, trust, and performance

Wendy Ju, Martin Steinert, Clifford Nass, 2015 .

Prototyping to Leverage Learning in Product Manufacturing Environments

Martin Steinert, Torgeir Welo, Jorgen Andreas Bogen Erichsen, 2016 .

CONCEPTUAL AND PRACTICAL USER INTEGRATION INTO THE DESIGN PROCESS - A FOUR STEP STAKEHOLDER APPROACH

Martin Steinert, Lauren Aquino Shluzas, Riitta Katila, 2012 .

DESIGNING TO MAXIMIZE VALUE FOR MULTIPLE STAKEHOLDERS: A CHALLENGE TO MED-TECH INNOVATION

Martin Steinert, Lauren Aquino Shluzas, Larry Leifer, 2011 .

Efforts on Capturing Prototyping and Design Activity in Engineering Design Research

Martin Steinert, Torgeir Welo, Andreas Wulvik, 2019, Procedia CIRP.

EEG Application for Human-Centered Experiments in Remote Ship Operations

Martin Steinert, Henrique M. Gaspar, Raheleh Kari, 2019 .

The Personal Trait Myth: A Comparative Analysis of the Innovation Impact of Design Thinking Tools and Personal Traits

Martin Steinert, Malte Jung, Nikolas Martelaro, 2015 .

Development of a wearable system to capture team (n>2) interactions in engineering design teams

Martin Steinert, Heikki Sjöman, 2016 .

Detecting glass and metal in consumer trash bags during waste collection using convolutional neural networks.

Martin Steinert, Sampsa Kohtala, Oliver Istad Funch, 2020, Waste management.

Applying Sequential Pattern Mining to Portable RFID System Data

Martin Steinert, Heikki Sjöman, 2016 .

User Experience in Training a Personalized Hearing System

Martin Steinert, Larry J. Leifer, Gabriel Aldaz, 2014, HCI.

Quantifying Characteristics of Iterations in the Fuzzy Front End of Product Development Processes

Mirko Meboldt, Martin Steinert, Johannes Heck, 2016 .

Development and verification of a simulation for leveraging results of a human subjects programming experiment pdf

Martin Steinert, Achim Gerstenberg, 2019, ArXiv.

TrollBOT: A Spontaneous Networking Tool Facilitating Rapid Prototyping of Wirelessly Communicating Products

Martin Steinert, Sampsa Kohtala, Håvard Vestad, 2020 .

Building an entrepreneurship data warehouse

Pekka Abrahamsson, Anh Nguyen-Duc, Martin Steinert, 2017, 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC).

Evaluating Continuous Improvement Efforts in New Product Development

Martin Steinert, Torgeir Welo, Jorgen Andreas Bogen Erichsen, 2018 .

Experimental Studies in Design Science and Engineering Design Science – A Repository for Experiment Setups

Martin Steinert, Stephanie Balters, Carlo Kriesi, 2016 .

Mapping remote and multidisciplinary learning barriers: lessons from challenge-based innovation at CERN

Martin Steinert, Matilde Bisballe Jensen, Tuuli Utriainen, 2018 .

A low-cost predictive display for teleoperation: Investigating effects on human performance and workload

Martin Steinert, Henrikke Dybvik, Kristoffer Slåttsveen, 2021, Int. J. Hum. Comput. Stud..

Exemplifying Prototype-Driven Development through Concepts for Medical Training Simulators

Martin Steinert, Jorgen Falck Erichsen, Marius Auflem, 2019, Procedia CIRP.

Physiological Data Acquisition for Deeper Insights into Prototyping

Mirko Meboldt, Martin Steinert, Stephanie Balters, 2014 .

CUSTOMER VALUE IS NOT A NUMBER – INVESTIGATING THE VALUE CONCEPT IN LEAN PRODUCT DEVELOPMENT

Martin Steinert, Torgeir Welo, Larry Leifer, 2011 .

Fast and iterative prototyping for injection molding – a case study of rapidly prototyping

Martin Steinert, Carlo Kriesi, Øystein Bjelland, 2018 .

We Need a Universal Design Project Outcome Performance Measurement Metric: A Discussion Based on Empirical Research

Martin Steinert, Larry Leifer, P. Skogstad, 2009 .

Measuring prototypes-a standardized quantitative description of prototypes and their outcome for data collection and analysis

Martin Steinert, Stephanie Balters, Matilde Bisballe Jensen, 2015 .

Investigating the relationship between mental state (workload and affect) and physiology in a control room setting (ship bridge simulator)

Martin Steinert, Henrikke Dybvik, Andreas Simskar Wulvik, 2019, Cognition, Technology & Work.

On Applying Machine Learning/Object Detection Models for Analysing Digitally Captured Physical Prototypes from Engineering Design Projects pdf

Martin Steinert, Torgeir Welo, Sampsa Kohtala, 2019, ArXiv.

Building Agile Design Teams (Presentation)

Martin Steinert, Matteo Vignoli, Gabriele Ferioli, 2013 .

Instrumenting the user: Needfinding by combining data logging and immediate self-reporting

Martin Steinert, Larry Leifer, Gabriel Aldaz, 2013 .

Capturing Body Language in Engineering Design – Tools and Technologies

Martin Steinert, Jorgen Andreas Bogen Erichsen, Andreas Wulvik, 2016 .

Dynamically capturing engineering team interactions with wearable technology

Martin Steinert, Heikki Sjöman, Matteo Vignoli, 2015 .

Key indicators to monitor and benchmark R&D activities in China: a comparative empirical and literature analysis

Martin Steinert, Markus Helfenstein, 2010 .

State of the art of generative design and topology optimization and potential research needs

Martin Steinert, Evangelos Tyflopoulos, Anna Olsen, 2018 .

A Combined Photoplethysmography and Force Sensor Prototype for Improved Pulse Waveform Analysis

Martin Steinert, Sampsa Kohtala, Håvard Vestad, 2019, 2019 IEEE SENSORS.

Mobile Business in Air Travel: Results from an Explorative Workshop

Martin Steinert, Stephanie Teufel, Patrick S. Merten, 2010, J. Inf. Technol. Tour..

Topology and Parametric Optimization-Based Design Processes for Lightweight Structures

Martin Steinert, Evangelos Tyflopoulos, M. Steinert, 2020, Applied Sciences.

Experimental Studies in Interaction Design and Engineering Design Science - a Repository for Experimental Setups

Martin Steinert, Stephanie Balters, Carlo Kriesi, 2016 .

Protobooth: gathering and analyzing data on prototyping in early-stage engineering design projects by digitally capturing physical prototypes

Martin Steinert, Torgeir Welo, Heikki Sjöman, 2020, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

Makerbox: Introducing a low threshold maker experience for everyone – An online facilitation platform for problem based projects

Martin Steinert, Knut Einar Aasland, Kristoffer Slåttsveen, 2017 .

USING SECONDARY VIDEO MATERIAL FOR USER OBSERVATION IN THE NEEDFINDING PROCESS FOR NEW PRODUCT DEVELOPMENT AND DESIGN

Martin Steinert, Jørgen Blindheim, Andreas Wulvik, 2016 .

Rapid prototyping and physical modelling in the development of a new additive manufacturing process for aluminium alloys

Torgeir Welo, Martin Steinert, Jørgen Blindheim, 2019, Procedia Manufacturing.

Investigation of the priming affect of material, challenge formulation and warm-up phases in soft prototyping sessions

Martin Steinert, Matilde Bisballe Jensen, Petter I Birkeland, 2016 .

Network! Network! Network! How global technology start-ups access modern business ecosystems

Martin Steinert, Antti-Jussi Tahvanainen, M. Steinert, 2013 .

From the eyes of the patient: real time gaze control of medical training mannequins

Martin Steinert, Heikki Sjöman, Carlo Kriesi, 2018, NordiCHI.

Understanding driver responses to voice alerts of autonomous car operations

Martin Steinert, Dongjun Shin, Larry Leifer, 2016 .

Comparing Novice and Expert User Inputs in Early Stage Product Design

Martin Steinert, Lauren Aquino Shluzas, Rebecca Currano, 2012 .

Steering a ship – investigating affective state and workload in ship simulations

Martin Steinert, Henrikke Dybvik, Andreas Wulvik, 2018 .

Proposing a novel approach for testing complex medical task trainer prototypes

Martin Steinert, Daniel Nygård Ege, Oscar Lilleløkken, 2020 .

Learning-by-Doing: Using Near Infrared Spectroscopy to Detect Habituation and Adaptation in Automated Driving

Wendy Ju, Martin Steinert, Stephanie Balters, 2017, AutomotiveUI.

A heuristic approach for early-stage product development in extreme environments

Martin Steinert, Torgeir Welo, Andreas Wulvik, 2017, 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC).

Bridging Tangible and Virtual Interaction: Rapid Prototyping of a Gaming Idea

Pekka Abrahamsson, Martin Steinert, Heikki Sjöman, 2015, ICEC.

Displayed Uncertainty Improves Driving Experience and Behavior: The Case of Range Anxiety in an Electric Car

Martin Steinert, David Sirkin, Malte F. Jung, 2015, CHI.

Back to School: Impact of Training on Driver Behavior and State in Autonomous Vehicles

Wendy Ju, Martin Steinert, Stephanie Balters, 2020, 2020 IEEE Intelligent Vehicles Symposium (IV).

CHARACTERIZING REFLECTIVE PRACTICE IN DESIGN – WHAT ABOUT THOSE IDEAS YOU GET IN THE SHOWER?

Martin Steinert, Rebecca Currano, Larry Leifer, 2011 .

Human Factor Issues in Remote Ship Operations: Lesson Learned by Studying Different Domains

Martin Steinert, Raheleh Kari, M. Steinert, 2021 .

DESIGN OF EXPERIMENT FOR SPORTS EQUIPMENT - EXPERIMENTALLY MAPPING THE DESIGN SPACE FOR PARALYMPIC ALPINE OUTRIGGERS

Martin Steinert, Helene Silseth, Henrik Snarvold Sletten, 2021, Proceedings of the Design Society.

Photogrammetry-based 3D scanning for supporting design activities and testing in early stage product development

Martin Steinert, Sampsa Kohtala, Jorgen F. Erichsen, 2021 .

Optimization of Brake Calipers Using Topology Optimization for Additive Manufacturing

Martin Steinert, Evangelos Tyflopoulos, Mathias Lien, 2021 .

DEMONSTRATING THE FEASIBILITY OF MULTIMODAL NEUROIMAGING DATA CAPTURE WITH A WEARABLE ELECTOENCEPHALOGRAPHY + FUNCTIONAL NEAR-INFRARED SPECTROSCOPY (EEG+FNIRS) IN SITU

Martin Steinert, Henrikke Dybvik, Christian Kuster Erichsen, 2021, Proceedings of the Design Society.

DESCRIPTION OF A WEARABLE ELECTROENCEPHALOGRAPHY + FUNCTIONAL NEAR-INFRARED SPECTROSCOPY (EEG+FNIRS) FOR IN-SITU EXPERIMENTS ON DESIGN COGNITION

Martin Steinert, Henrikke Dybvik, Christian Kuster Erichsen, 2021, Proceedings of the Design Society.

Perception by Palpation: Development and Testing of a Haptic Ferrogranular Jamming Surface

Martin Steinert, Henrikke Dybvik, Marius Auflem, 2021, Frontiers in Robotics and AI.

Redefining customer value in lean product development design projects

Martin Steinert, Torgeir Welo, Larry Leifer, 2013 .

Temporal Static Visualisation of Transcripts for Pre-Analysis of Video Material: Identifying Modes of Information Sharing

Martin Steinert, Matilde Bisballe Jensen, Andreas Wulvik, 2017 .

FROM LEAN PRODUCT DEVELOPMENT TO LEAN INNOVATION: SEARCHING FOR A MORE VALID APPROACH FOR PROMOTING UTILITARIAN AND EMOTIONAL VALUE

Martin Steinert, Torgeir Welo, Martin Gudem, 2014 .

Triangulating Front End Engineering Design Activities with Physiology Data and Psychological Preferences

Martin Steinert, Kathryn Weed Jablokow, M. Steinert, 2013 .

Exploring the Impact of Cognitive Style and Academic Discipline on Design Prototype Variability

Martin Steinert, Kathryn Weed Jablokow, Larry Leifer, 2014 .

Iterative Creation and Analysis of Generic Ideation Spaces for SMEs

Mirko Meboldt, Martin Steinert, Johannes Heck, 2014 .

Hybrid Metal Extrusion & Bonding (HYB) - a new technology for solid-state additive manufacturing of aluminium components

Martin Steinert, Torgeir Welo, Jørgen Blindheim, 2018 .

PROVOKING ITERATIONS IN IDEATION WORKSHOPS–AN EXPLORATIVE STUDY

Mirko Meboldt, Martin Steinert, Johannes Heck, 2015 .

A dissensus based online Delphi approach: An explorative research tool

Martin Steinert, M. Steinert, 2009 .

Decision-making in engineering - a call for affective engineering dimensions in applied engineering design and design sciences

Martin Steinert, Stephanie Balters, 2014, Proceedings of the 2014 International Conference on Innovative Design and Manufacturing (ICIDM).