Franz Irlinger

发表

Dense 3D-packing algorithm for filling the offset contours of a new printing process based on 3D plastic droplet generation

Tim Lüth, Jelena Prsa, Johannes Schwaiger, 2013, 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO).

Computer Aided, Task-Based Kinematic Design of Linkages: A New Lecture for Engineering Students

Tim C. Lueth, Franz Irlinger, Kassim Abdul-Sater, 2015 .

Three-Position Synthesis of Origami-Evolved, Spherically Constrained Spatial Revolute–Revolute Chains

Tim C. Lueth, Franz Irlinger, Kassim Abdul-Sater, 2016 .

A Flexible Discrete Building Block Synthesis Approach As Basis for the Design of Planar Linkages

Franz Irlinger, Kassim Abdul-Sater, Simon Laudahn, 2017 .

A Feasibility Study on Driver Model Based Lap Time Simulation Using Genetic Algorithms

Franz Irlinger, Alvaro Baleato Varela, 2017 .

Reduction of door discomfort in access and exit situations while parking

Franz Irlinger, Marcus Fischer, Christian Richter, 2007 .

A spatial path specification system for mechanism development

Tim C. Lueth, Franz Irlinger, Christian Richter, 2009, 2009 2nd Conference on Human System Interactions.

Hydroxyapatite powder used for rapid prototyping in medical engineering

Franz Irlinger, Alexander Ott, 2009, Int. J. Comput. Appl. Technol..

Kinematic Design of Miura-Ori-Based Folding Structures Using the Screw Axis of a Relative Displacement

Tim C. Lueth, Franz Irlinger, Kassim Abdul-Sater, 2014 .

Objektorientierte Programmierung in der Getriebetechnik

Franz Irlinger, 1993 .

Software tool for detection and filling of voids as a part of tool-path strategy development for droplet generating 3D printers

Tim Lüth, Jelena Prsa, Franz Irlinger, 2015, 2015 International Conference on Computer, Information and Telecommunication Systems (CITS).

Intelligent Combination of Batch Fabrication With Rapid Prototyping Techniques for a Drop-on-Demand Microdrop Generator

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2012 .

Tremor compensation by use of a mechatronic cup holder

Tim Lüth, Franz Irlinger, Marcus Fischer, 2010, 2010 4th International Conference on Pervasive Computing Technologies for Healthcare.

Auslegung und Rapid Prototyping einer räumlichen Fahrzeugtürkinematik unter Berücksichtigung von Singularitätsbetrachtungen sphärischer 4-Gelenkgetriebe

Tim C. Lueth, Franz Irlinger, Kassim Abdul-Sater, 2017 .

Use of an analytic approach to proof numerical calculations of the deflection behaviour of thin plates

Tim C. Lueth, Franz Irlinger, Thomas Ottnad, 2012 .

Manual microassembly system with integrated squeegee device for homogenous and defined adhesive layers for bimorph piezoelectric actuators using in drop-on-demand techniques

Tim Lüth, Franz Irlinger, Markus Kagerer, 2013, 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO).

Development and application of a low-cost manual micro assembly system with integrated heater

Tim Lüth, Franz Irlinger, Markus Kagerer, 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

Evaluation of the infill algorithm for trajectory planning of pointed ends for droplet-generating 3D printers

Tim Lüth, Jelena Prsa, Franz Irlinger, 2014, 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO 2014).

Test Environment for an Elastic Mechanism—Related to a Kirchhoff Plate—for Usage as Pressure Sensor

Tim C. Lueth, Franz Irlinger, Thomas Ottnad, 2011 .

A novel building strategy to reduce warpage in droplet-based additive manufacturing of semi-crystalline polymers

Tim Lüth, Jelena Prsa, Franz Irlinger, 2018, 2018 IEEE International Conference on Robotics and Biomimetics (ROBIO).

Compact model for the characterization of a piezoelectric bend-mode droplet generator

Tim Lüth, Franz Irlinger, Markus Kagerer, 2014, 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO 2014).

Fabrication and Application of a Chemical Resistant Low-Cost Microdrop Generator

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2011 .

Piezo inkjet drop-on-demand experimentation platform manufactured with rapid prototyping techniques enabling future technologies

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

Design, construction, and verification of a printhead - tolerant towards bubbles - dosing liquid wax using rapid prototyping techniques

Tim C. Lueth, Franz Irlinger, Thomas Ottnad, 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

Rapid Prototyping Journal A new method for printer calibration and contour accuracy manufacturing with 3 D-print technology

Franz Irlinger, Tim C. Lüth, S. Stopp, 2016 .

Simulation der Kraftkopplung zwischen Schrittmotor und Kurvenscheibe

Franz Irlinger, 2001 .

G-Code Generation for a New Printing Process Based on 3D Plastic Polymer Droplet Generation

Tim C. Lueth, Johannes Schwaiger, Franz Irlinger, 2013 .

Indium solder printing for low temperature applications and modeling of a droplet generator

Tim Lüth, Franz Irlinger, K. Werner, 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

A new method for printer calibration and contour accuracy manufacturing with 3D‐print technology

Tim C. Lueth, Franz Irlinger, S. Stopp, 2008 .

Automatic, reference-free and conformity-oriented evaluation and interpretation of CT-models

Tim C. Lueth, Jelena Prsa, Franz Irlinger, 2015, 2015 International Conference on Computing and Network Communications (CoCoNet).

Two-Configuration Synthesis of Origami-Guided Planar, Spherical and Spatial Revolute–Revolute Chains

Tim C. Lueth, Franz Irlinger, Kassim Abdul-Sater, 2013 .

Algorithm for Detecting and Solving the Problem of Under-Filled Pointed Ends Based on 3D Printing Plastic Droplet Generation

Tim C. Lueth, Jelena Prsa, Franz Irlinger, 2014 .

Requirements and First Approach to Use an Extruder for Future Use Enabling Additive Manufacturing Techniques

Franz Irlinger, Tim C. Lüth, Thomas Ottnad, 2013 .

Redesign of a Test Environment for an Elastic Mechanism for Usage as Pressure Sensor Element

Tim C. Lueth, Franz Irlinger, Thomas Ottnad, 2012 .

Influence of Infill Structures and Process Parameters on the Tensile Strength of 3D-printed PEEK Parts

Tim C. Lueth, Franz Irlinger, Andreas Schroeffer, 2019, 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO).

Fast Droplet Generation With a Printhead Manufactured With Rapid Manufacturing Techniques Mounted on a Carrier Board

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2013 .

Friction Coefficients and Surface Properties for Laser Sintered Parts

Tim C. Lueth, Franz Irlinger, Daniel B. Roppenecker, 2013 .

Laser source independent basic parameters in micro-cutting

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

Compact Model for the Static and Dynamic Behavior of a Piezoelectric Bimorph Actuator for Microfluidic MEMS

Tim C. Lueth, Franz Irlinger, Markus Kagerer, 2014 .

Robust Applicator Registration for Interstitial Gynecologic Brachytherapy

Ron Kikinis, William M. Wells, Tim C. Lueth, 2013 .