Makoto Ohta

发表

Development of Computer-Based Simulator for Catheter Navigation in Blood Vessels (2nd Report, Evaluation of Torquability of Guidewire)

Kazuto Takashima, Toshiharu Mukai, Kiyoshi Yoshinaka, 2007 .

Methodology of evaluation for medical devices using in-vitro/in-silico biomodel

Makoto Ohta, 2011, 2011 International Symposium on Micro-NanoMechatronics and Human Science.

Local internal pressure measurement system of cerebral aneurysm model using ultra-miniature fiber-optic pressure sensor

Hiroshi Yoshida, Akira Ito, Yoichi Haga, 2017, 2017 International Symposium on Micro-NanoMechatronics and Human Science (MHS).

Three dimensional measurements of cerebral aneurysms and vessel size

Makoto Ohta, Luca Augsburger, Daniel A. Rüfenacht, 2006 .

Sensitivity study on modelling a flow-diverting stent as a porous medium using computational fluid dynamics

Yujie Li, Yi Qian, William Yang, 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

What does computational fluid dynamics tell us about intracranial aneurysms? A meta-analysis and critical review

Khalid M. Saqr, Makoto Ohta, Sherif Rashad, 2019, Journal of cerebral blood flow and metabolism : official journal of the International Society of Cerebral Blood Flow and Metabolism.

A lattice Boltzmann study of blood flow in stented aneurism

Miki Hirabayashi, Bastien Chopard, Makoto Ohta, 2004, Future Gener. Comput. Syst..

Ultrasound sensors installed in blood vessel model for intravascular surgery procedures

Hiroshi Yoshida, Yoichi Haga, Tadao Matsunaga, 2017, 2017 IEEE International Conference on Cyborg and Bionic Systems (CBS).

Hydroelastic Responses of the Mega-Float Phase-II Model In Waves

Shogo Miyajima, Makoto Ohta, Hideyuki Seto, 2003 .

Linear Lisp with Lazy Reference Count

Masakazu Nakanishi, Teruo Iwai, Makoto Ohta, 1999 .

A cyber-physical system for strain measurements in the cerebral aneurysm models

Fumihito Arai, Toshio Fukuda, Guiryong Kwon, 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

Introduction of numerical simulation being applied to the study of aneurysm treatment with flow-diverting stent

Yujie Li, Makoto Ohta, Hitomi Anzai, 2017 .

Functional Programming and its Application to Image Processing

Makoto Ohta, 1988 .

Study on a Structural Response Analysis Method for Very Large Floating Structures in Regular Waves (First Report)

Mayumi Ochi, Makoto Ohta, Hideyuki Seto, 2002 .

Effect of a notch at the distal end of a microcatheter on vein deformation in segmental adrenal venous sampling: a preliminary study using computational fluid dynamics

Makoto Ohta, Sho Matsumoto, Tomo Kinoshita, 2019, Medical & Biological Engineering & Computing.

Pulse-Wave-Pattern Classification with a Convolutional Neural Network

Makoto Ohta, Kazuhiro Watanabe, Hitomi Anzai, 2019, Scientific Reports.

COMPUTER ANIMATION AND VIRTUAL WORLDS Comp. Anim. Virtual Worlds (2009) Published online in Wiley InterScience (www.interscience.wiley.com) DOI: 10.1002/cav.318

Tomoyuki Nishita, Yoshihiro Kanamori, Makoto Ohta, 2009 .

Numerical analysis and experimental observation of guidewire motion in a blood vessel model.

Koji Mori, Kazuto Takashima, Kiyoshi Yoshinaka, 2014, Medical engineering & physics.

Offshore Operational Availability of Onboard Direct Injection of CO2 into Sub-seabed Geological Formations

Hiroyuki Osawa, Masahiko Ozaki, Makoto Ohta, 2013 .

In vitro strain measurements in cerebral aneurysm models for cyber‐physical diagnosis

Fumihito Arai, Toshio Fukuda, Zoran Najdovski, 2013, The international journal of medical robotics + computer assisted surgery : MRCAS.

Haemodynamics in a patient-specific intracranial aneurysm according to experimental and numerical approaches: A comparison of PIV, CFD and PC-MRI.

Yujie Li, Makoto Ohta, Takashi Kosugi, 2020, Technology and health care : official journal of the European Society for Engineering and Medicine.

System Plan Considering Spare Capability Allowed for Weather Conditions for CO2 Marine Transport and Release in Deep Waters

Yuichi Sasaki, Makoto Ohta, Masami Matsuura, 2006 .

In search for a better stent: Surrogate based multi-objective optimization of stent design under influence of vessel wall deformation

Pramudita Satria Palar, Koji Shimoyama, Makoto Ohta, 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Numerical analysis of the flow pattern in stented aneurysms and its relation to velocity reduction and stent efficiency

Bastien Chopard, Makoto Ohta, Daniel A. Rüfenacht, 2006, Math. Comput. Simul..

A Theoretical Approach to Hydroelastic Behavior of a Very Large Floating Structure in Regular Waves (Fourth Report)

Mayumi Ochi, Makoto Ohta, Hideyuki Seto, 2000 .

Numerical Prediction and Suppression of VIV of Deepwater Riser

Hideyuki Suzuki, Makoto Ohta, Toshiki Nozawa, 2010 .

High Fidelity Virtual Stenting (HiFiVS) for Intracranial Aneurysm Flow Diversion: In Vitro and In Silico

Hiroyuki Kosukegawa, Hui Meng, Makoto Ohta, 2013, Annals of Biomedical Engineering.

Lattice Boltzmann Analysis of the Flow Reduction Mechanism in Stented Cerebral Aneurysms for the Endovascular Treatment

Miki Hirabayashi, Bastien Chopard, Makoto Ohta, 2003, International Conference on Computational Science.

Evidence for non-Newtonian behavior of intracranial blood flow from Doppler ultrasonography measurements

Khalid M. Saqr, Makoto Ohta, Simon Tupin, 2018, Medical & Biological Engineering & Computing.

Development of a blood vessel model with ultrasound sensors to quantify intravascular treatment skills

Hiroshi Yoshida, Yoichi Haga, Tadao Matsunaga, 2017, 2017 International Symposium on Micro-NanoMechatronics and Human Science (MHS).

Computational Fluid Dynamics Analysis to Predict Endothelial Cells Migration During Flow Exposure Experiment With Placement of Two Stent Wires

Zi Wang, Makoto Ohta, Hitomi Anzai, 2018, 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Computational Hemodynamic Analysis for the Diagnosis of Atherosclerotic Changes in Intracranial Aneurysms: A Proof-of-Concept Study Using 3 Cases Harboring Atherosclerotic and Nonatherosclerotic Aneurysms Simultaneously

Toshiki Endo, Shin-ichiro Sugiyama, Kenichi Funamoto, 2016, Comput. Math. Methods Medicine.

Development of a poly (vinyl alcohol) hydrogel phantom to allow physical measurement in ultrasonographic conditions: A model for scatter

Makoto Ohta, Kazuki Tamura, Tadashi Yamaguchi, 2017, 2017 IEEE International Conference on Cyborg and Bionic Systems (CBS).

Optimization of flow diverters for cerebral aneurysms

Bastien Chopard, Jean-Luc Falcone, Makoto Ohta, 2012, J. Comput. Sci..

Evaluation of the effect of catheter on the guidewire motion in a blood vessel model by physical and numerical simulations

Koji Mori, Kazuto Takashima, Kiyoshi Yoshinaka, 2017 .

Multipoint pressure measurement in blood vessel model for evaluation of intravascular treatment of cerebral aneurysm using fiber-optic pressure sensors

Hiroshi Yoshida, Yoichi Haga, Tadao Matsunaga, 2017, 2017 IEEE International Conference on Cyborg and Bionic Systems (CBS).

Stent design optimization based on kriging surrogate model under deformed vessel wall: Pulsatile inlet flow

Pramudita Satria Palar, Koji Shimoyama, Makoto Ohta, 2017, 2017 5th International Conference on Instrumentation, Control, and Automation (ICA).

Comparative analysis for evaluating the traceability of interventional devices using blood vessel phantom models made of PVA-H or silicone.

Sung Hoon Kim, Chang-Ho Yu, Tae-Kyu Kwon, 2015, Technology and health care : official journal of the European Society for Engineering and Medicine.

Multiobjective design optimization of stent geometry with wall deformation for triangular and rectangular struts

Pramudita Satria Palar, Koji Shimoyama, Makoto Ohta, 2018, Medical & Biological Engineering & Computing.

Applying computer simulation to the design of flow-diversion treatment for intracranial aneurysms

Yujie Li, Yi Qian, Makoto Ohta, 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Modeling and hexahedral meshing of arterial networks from centerlines

Carole Frindel, Makoto Ohta, M'eghane Decroocq, 2022, ArXiv.

Manufacture-Oriented Design Optimisation of a Flow Diverter Stent Using Lattice Boltzmann Method and Simulated Annealing

Bastien Chopard, Makoto Ohta, Hitomi Anzai, 2015 .

Comparative Study Between Different Strut’s Cross Section Shape on Minimizing Low Wall Shear Stress Along Stent Vicinity via Surrogate-Based Optimization

Pramudita Satria Palar, Koji Shimoyama, Makoto Ohta, 2017 .

In vitro study of ultrasound radiation force-driven twinkling sign using PVA-H gel and glass beads tissue-mimicking phantom

Lei Liu, Kenichi Funamoto, Toshiyuki Hayase, 2013, Journal of Medical Ultrasonics.

Measurements of Dynamic Viscoelasticity of Poly (vinyl alcohol) Hydrogel for the Development of Blood Vessel Biomodeling

Lei Liu, Toshiyuki Hayase, Hiroyuki Kosukegawa, 2008 .

Parametric study of porous media as substitutes for flow-diverter stent

Toshio Nakayama, Makoto Ohta, Hitomi Anzai, 2015 .

Simulation of hemodynamics in artery with aneurysm and stenosis with different geometric configuration

Aike Qiao, Toshio Nakayama, Makoto Ohta, 2014 .

Correlation between Reynolds number and eccentricity effect in stenosed artery models.

Masud Behnia, Makoto Ohta, Ashkan Javadzadegan, 2013, Technology and health care : official journal of the European Society for Engineering and Medicine.

Development of an In Vitro Tracking System with Poly (vinyl alcohol) Hydrogel for Catheter Motion

Hiroyuki Kosukegawa, Keisuke Mamada, Kanju Kuroki, 2010 .

Numerical simulation of aneurysmal haemodynamics with calibrated porous-medium models of flow-diverting stents.

Makoto Ohta, Winston Chong, D. I. Verrelli, 2018, Journal of biomechanics.

Changes in blood flow due to stented parent artery expansion in an intracranial aneurysm.

Makoto Ohta, Teruo Matsuzawa, Futoshi Mori, 2015, Technology and health care : official journal of the European Society for Engineering and Medicine.

Bioengineering Materials and Conditions for Obtaining Low Friction with PVA Hydrogels

Hiroyuki Kosukegawa, Makoto Ohta, Vincent Fridrici, 2013 .

Manufacture of patient-specific vascular replicas for endovascular simulation using fast, low-cost method

Kensuke Kawai, Eiju Watanabe, Makoto Ohta, 2016, Scientific Reports.

Mechanical Properties of Tube-Shaped Poly (Vinyl Alcohol) Hydrogel Blood Vessel Biomodel

Hiroyuki Kosukegawa, Makoto Ohta, Shuya Shida, 2010 .

Haemodynamic effects of stent diameter and compaction ratio on flow-diversion treatment of intracranial aneurysms: A numerical study of a successful and an unsuccessful case.

Makoto Ohta, Winston Chong, D. I. Verrelli, 2017, Journal of biomechanics.

Influence of shear stress on phenotype and MMP production of smooth muscle cells in a co-culture model

Hui Meng, Makoto Ohta, Masaaki Sato, 2017 .

Computational Fluid Dynamics of Carotid Arteries After Carotid Endarterectomy or Carotid Artery Stenting Based on Postoperative Patient-Specific Computed Tomography Angiography and Ultrasound Flow Data

Toshio Nakayama, Makoto Ohta, Koji Tokunaga, 2011, Neurosurgery.

Characterization of flow reduction properties in an aneurysm due to a stent.

Miki Hirabayashi, Bastien Chopard, Makoto Ohta, 2003, Physical review. E, Statistical, nonlinear, and soft matter physics.

Current concepts of endovascular aneurysm treatment, and about the role of stents for endovascular repair of cerebral arteries 1

Makoto Ohta, Daniel A. Rüfenacht, P. Lylyk, 2004 .

Daughter Sac Formation Related to Blood Inflow Jet in an Intracranial Aneurysm.

Toshiki Endo, Kenichi Funamoto, Toshio Nakayama, 2016, World neurosurgery.

Development of Stent Strut Pattern for Cerebral Aneurysm

Toshio Nakayama, Shinkyu Jeong, Makoto Ohta, 2010 .

Towards the patient-specific design of flow diverters made from helix-like wires: an optimization study

Bastien Chopard, Makoto Ohta, Hitomi Anzai, 2016, Biomedical engineering online.

Combinational Optimization of Strut Placement for Intracranial Stent Using a Realistic Aneurysm

Bastien Chopard, Makoto Ohta, Hitomi Anzai, 2014 .

Catheter and guidewire simulator for intravascular surgery (Comparison between simulation results and medical images)

Toshiharu Mukai, Kazuto Takashima, Kiyoshi Yoshinaka, 2009 .

Relative residence time prolongation in intracranial aneurysms: a possible association with atherosclerosis.

Shin-ichiro Sugiyama, Toshio Nakayama, Makoto Ohta, 2013, Neurosurgery.

Influence of mineral admixtures on expansive cement mortars

Kevin J. Folliard, Makoto Ohta, Ellen M Rathje, 1994 .

Three-Dimensional Reconstruction of a Cerebral Stent using Micro-CT for Computational Simulation

Toshio Nakayama, Makoto Ohta, Daniel A. Rüfenacht, 2008 .

Influence of stent properties on the alteration of cerebral intra-aneurysmal haemodynamics: flow quantification in elastic sidewall aneurysm models

Makoto Ohta, Francis Cassot, Jean H D Fasel, 2005, Neurological research.

Classification of Blood Flow in Cerebral Aneurysm Considering the Parent Artery Curves

Shin-ichiro Sugiyama, Toshio Nakayama, Makoto Ohta, 2013 .

Anisotropic in vitro vessel model using poly(vinyl alcohol) hydro gel and mesh material

Lei Liu, Toshiyuki Hayase, Hiroyuki Kosukegawa, 2010 .

Optimization of strut placement in flow diverter stents for four different aneurysm configurations.

Toshiyuki Hayase, Bastien Chopard, Jean-Luc Falcone, 2014, Journal of biomechanical engineering.

Control of Wall Thickness of Blood Vessel Biomodel Made of Poly (Vinyl Alcohol) Hydrogel by a Three-Dimensional-Rotating Spin Dip-Coating Method

Hiroyuki Kosukegawa, Makoto Ohta, Chihaya Kiyomitsu, 2011 .

Friction Properties of Poly(vinyl alcohol) Hydrogel: Effects of Degree of Polymerization and Saponification Value

Hiroyuki Kosukegawa, Keisuke Mamada, Makoto Ohta, 2011 .

Study of parameters for evaluating the pushability of interventional devices using box-shaped blood vessel biomodels made of PVA-H or silicone.

Makoto Ohta, Tae Kyu Kwon, Chang Ho Yu, 2014, Bio-medical materials and engineering.

Friction properties of PVA-H/steel ball contact under water lubrication conditions

Hiroyuki Kosukegawa, Keisuke Mamada, Makoto Ohta, 2011 .

Poly-vinyl alcohol hydrogel vascular models for in vitro aneurysm simulations: the key to low friction surfaces.

Makoto Ohta, Sadami Tsutsumi, Hiroo Iwata, 2004, Technology and health care : official journal of the European Society for Engineering and Medicine.

Blood Flow Into Basilar Tip Aneurysms: A Predictor for Recanalization After Coil Embolization

Toshiki Endo, Yasushi Matsumoto, Makoto Ohta, 2016, Stroke.