Nozomu Kawai

发表

Consideration of factor controlling the press-formability of precipitate-hardening aluminum A6061.

Toshihiko Mori, Ye Li Liu, Nozomu Kawai, 1989 .

A Cousideration of Correlation in Friction Tests for Metal Forming Processes : Series C : Vibration, Control Engineering, Engineering for Industry

Nozomu Kawai, Kuniaki Dohda, Shigeaki Akao, 1987 .

The Square Shell Deep-Drawing of an Aluminum Sheet (Combined Effects of Lubrication on Punch Head and Tool Shape on Square Shell Deep-Drawability) : Series C : Vibration, Control Engineering, Engineering for Industry

Toshihiko Mori, Nozomu Kawai, Yasuo Marumo, 1986 .

Critical Conditions in the Ironing Process of Thin Wall Metal Cups (3rd Report, Mechanisms of Fracture of Metal Cups) : Series C : Vibration, Control Engineering, Engineering for Industry

Nozomu Kawai, Hiroyuki Saiki, Masami Saito, 1987 .

Square shell deep-drawability of commercically pure aluminum sheets. (Determination of the blank shape for the cup with uniform height and deep-drawability assessment by means of its blank)

Toshihiko Mori, Nozomu Kawai, Yasuo Marumo, 1987 .

Combined Effects of Strain-Hardening Characteristics of Materials and Tool Shape on Square Shell Deep-Drawability. Discussion of Optimum n-Value and Blank Shape for Square Shell Deep-Drawability.

Toshihiko Mori, Nozomu Kawai, Yasuo Marumo, 1993 .

The Mechanism Controlling the Deep-drawability of Mild Steel Sheets : Series C : Vibration, Control Engineering, Engineering for Industry

Nozomu Kawai, Nobukazu Hayashi, Shinsuke Matsui, 1987 .

Square Shell Deep-Drawability of Commercially Pure Aluminum Sheets : Determination of the Blank Shape for the Cup with Uniform Height and Deep-Drawability Assessment by Means of Its Blank : Series C : Vibration, Control Engineering, Engineering for Industry

Toshihiko Mori, Nozomu Kawai, Yasuo Marumo, 1987 .

The Strain-Hardening Law of Non-Heat-Treatable Aluminum Alloy Sheets : Vibration, Control Engineering, and Engineering for Industry, New materials, new energy, biotechnology, electronics, etc.

Toshihiko Mori, Nozomu Kawai, Nobukazu Hayashi, 1987 .

Effect of Galling on Metal Fracture in Cup Ironing Process

Masami Saito, Nozomu Kawai, Masami Saito, 1989 .

Critical Conditions in the Ironing Process of Thin Wall Metal Cups : 2nd Report, Effects of Lubricating Conditions on Welding Behavior : Vibration, Control Engineering, and Engineering for Industry, New materials, new energy, biotechnology, electronics, etc.

Nozomu Kawai, Hiroyuki Saiki, Masami Sito, 1987 .

Combined effects of strain-hardening characteristic of materials and tool shape on square shell deep-drawability.

Toshihiko Mori, Nozomu Kawai, Yasuo Marumo, 1988 .

Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 2nd Report, Analysis and Considerations for Conditions of Blank-Holding

Nozomu Kawai, 1960 .

Effects of Punch Cross-Section on Deep-Drawability of Square Shell of Aluminum Sheet

F. Kondoh, Nozomu Kawai, Toshihiko Mori, 1987 .

Friction behavior in the cup ironing process of aluminum sheets

Masami Saito, Nozomu Kawai, Kuniaki Dohda, 1992 .

On-site analysis of archaeological artifacts excavated from the site on the outcrop at Northwest Saqqara, Egypt, by using a newly developed portable fluorescence spectrometer and diffractometer

Nozomu Kawai, Sakuji Yoshimura, Izumi Nakai, 2009, Analytical and bioanalytical chemistry.

Surface roughening mechanism of polycrystalline metal sheet during plastic deformation. Effect of strain path on surface topography.

Nozomu Kawai, Tamotsu Nakamura, Yujiro Ukai, 1985 .

Experimental Analysis of Ironing of Thin Metal Cups

Masami Saito, Nozomu Kawai, Hiroyuki Saiki, 1989 .

Research into mirror surface finishing by the ironing process

Nozomu Kawai, Kuniaki Dohda, Kazuhiro Akiyama, 1990 .