Tobias Wille

发表

Composite Process Chain Towards As-Built Design

Robert Hein, Tobias Wille, Luise Kärger, 2013 .

An analytical scaling approach for low-velocity impact on composite structures

Tobias Wille, Raffael Marius Bogenfeld, Janko Kreikemeier, 2018 .

Enabling next generation composite manufacturing by in-situ structural evaluation and process adjustment, International Symposium on Composites Manufacturing

Tobias Wille, 2016 .

Fully controlled production environment for autoclave injection processes

Philipp Hilmer, Markus Kleineberg, Nico Liebers, 2015 .

New Robustness-Based Design Strategy for Thin-Walled Composite Structures

Richard Degenhardt, Michael Sinapius, Tobias Wille, 2012 .

In-situ Evaluation of Laminates with Gaps and Overlaps - Uncertainties in Modelling and Analysis

Tobias Wille, Falk Heinecke, 2018 .

IN-SITU ASSESSMENT OF MANUFACTURING DEFECTS – A CONTRIBUTION TO INDUSTRY 4.0

Tobias Wille, Falk Heinecke, 2016 .

In-situ structural assessment during composite layup and curing

Robert Hein, Tobias Wille, Falk Heinecke, 2018 .

Modelling gaps and overlaps for assessing the structural response of AFP composite structures by means of numerical simulation

Tobias Wille, Falk Heinecke, 2015 .

PROCESS INTEGRATED IN-SITU STRUCTURAL EVALUATION FOR SIGNIFICANT MATERIAL AND COST SAVING BY INDUSTRY 4.0

Robert Hein, Tobias Wille, Falk Heinecke, 2016 .

Review and benchmark study on the analysis of low-velocity impact on composite laminates

Tobias Wille, Raffael Marius Bogenfeld, Janko Kreikemeier, 2018 .

As-Built-Simulation based on TFP Manufacturing Data

Tobias Wille, Luise Kärger, Alexander Kling, 2010 .

FROM AS-DESIGNED TO AS-BUILT ANALYSIS USING AN MULTISCALE APPROACH AND MODEL UPDATE

Tobias Wille, Falk Heinecke, T. Wille, 2015 .

A robust design strategy for thin-walled composite structures under compression load based on the assessment of the structural energy

Richard Degenhardt, Michael Sinapius, Tobias Wille, 2012 .

Process Monitoring and Evaluation

Tobias Wille, Falk Heinecke, Robert Hein, 2017 .

ASSESSING THE STRUCTURAL RESPONSE OF AUTOMATED FIBRE PLACEMENT COMPOSITE STRUCTURES WITH GAPS AND OVERLAPS BY MEANS OF NUMERICAL APPROACHES

Tobias Wille, Falk Heinecke, Wouter van den Brink, 2015 .

Simulation and Optimization of infrared Heating within the Automotive Production Process

Tobias Wille, 2007 .

Validation of the low-velocity impact damage prediction through analytical scaling

Tobias Wille, Raffael Marius Bogenfeld, Janko Kreikemeier, 2019, Composite Structures.

Piezoelectric Vibration Control within Whole Engine Design

Tobias Wille, Falk Heinecke, 2013 .

PROBABILISTIC PROCESS SIMULATION TO PREDICT PROCESS INDUCED DISTORTIONS AND STRESSES OF A COMPOSITE FRAME

Robert Hein, Tobias Wille, Martin Liebisch, 2016 .

Development, implementation and demonstration of a composite tool chain for concurrent engineering

Robert Hein, Tobias Wille, Natalie Mayer, 2013 .

In-situ structural evaluation during the fibre deposition process of composite manufacturing

Tobias Wille, Falk Heinecke, T. Wille, 2018 .

A Benchmark on Low Velocity Impact Simulation of Composite Materialsand Perspectives for Efficient Application

Tobias Wille, Raffael Marius Bogenfeld, Janko Kreikemeier, 2015 .

A robustness-based design strategy for composite structures

Richard Degenhardt, Michael Sinapius, Rolf Zimmermann, 2014 .

Innovative Testing Methods on Specimen and Component Level

Tobias Wille, Falk Odermann, T. Wille, 2013 .

CompTAB – Composite Tool Chain As-Built

Robert Hein, Tobias Wille, Natalie Mayer, 2012 .

Robustness Assessment of Stiffened Thin-Walled Composite Structures in Post-Buckling

Richard Degenhardt, Michael Sinapius, Tobias Wille, 2013 .

Probabilistic process simulation to predict process induced distortions of a composite frame

Robert Hein, Tobias Wille, Martin Liebisch, 2018 .

DEFECT ASSESSMENT METHOD FOR AUTOMATED FIBRE PLACEMENT INDUCED DEVIATIONS

Tobias Wille, Falk Heinecke, T. Wille, 2014 .

A New Method for Individual Impact Damage and Repair Assessment on Composite Structures based on Residual Strength Analysis

Tobias Wille, Christoph Paul Dienel, Julia Guerrero Santafe, 2016 .

Simulation of a 3D printing process

Tobias Wille, Robert Hein, Inigo Urcelay Oca, 2018 .

Probabilistic Process Simulation and In-Situ Process Prediction during Composite Manufacturing as Contribution to Industry 4.0

Tobias Wille, Martin Liebisch, Robert Hein, 2019 .

AS-BUILT-SIMULATION WITHIN THE CONTINUOUS COMPOSITE PROCESS CHAIN

Tobias Wille, Luise Kärger, Alexander Kling, 2011 .

A robustness-based design strategy for composite structures – probabilistic approach

Richard Degenhardt, Michael Sinapius, Rolf Zimmermann, 2014 .

Prediction of Process-Induce Distortions and Residual Stresses of Ancomposite Suspension Blade

Robert Hein, Tobias Wille, Khalil Gabtni, 2015 .

FE-BASED PREDICTION OF PROCESS INDUCED DISTORTIONS AND RESIDUAL STRESSES FOR CFRP FRAMES

Robert Hein, Tobias Wille, Martin Liebisch, 2015 .

New Methods for Computing and Developing Hybrid Sheet Molding Compound Structures for Aviation Industry

Martin Hentschel, Tobias Wille, Marc Fette, 2017 .