Sven Hübner

发表

Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process

Eduard Reithmeier, Steffen Matthias, Markus Kästner, 2016, Prod. Eng..

REDUCING DAMAGE OF COATING CAUSED BY CLINCHING OF ALUMINUM SHEET METAL BY PROCESS OPTIMIZATION

Bernd-Arno Behrens, Sven Hübner, Claus-Peter Eckold, 2008 .

Adjustment of Design Limited Imperfections for Transportation Vehicles

Bernd-Arno Behrens, Sven Hübner, Kathrin Voges-Schwieger, 2011 .

FEA-Based Optimisation of a Clinching Process with a Closed Single-Part Die Aimed at Damage Minimization in CR240BH-AlSi10MnMg Joints

Bernd-Arno Behrens, Sven Hübner, Anas Bouguecha, 2015 .

Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming

Bernd-Arno Behrens, A. Erman Tekkaya, Marion Merklein, 2016, Prod. Eng..

Draw Bending of Load-Adapted Sheet Metal Profiles

Bernd-Arno Behrens, Sven Hübner, Volker Ulbricht, 2010 .

3D CAD modeling of deep drawing tools based on a new graphical language

Bernd-Arno Behrens, David Bauer, Gregor Wrobel, 2018 .

Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses

Bernd-Arno Behrens, Richard Krimm, Sven Hübner, 2011 .

Manufacturing of functional elements by sheet-bulk metal forming processes

Robert Schulte, Sebastian Wernicke, Bernd-Arno Behrens, 2016, Prod. Eng..

Flexible Draw Bending of Profiles

Bernd-Arno Behrens, Sven Hübner, Volker Ulbricht, 2009 .

Process-Integrated Projection Welding during Deep Drawing

Bernd-Arno Behrens, Sven Hübner, Masood Jalanesh, 2016 .

FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints

Bernd-Arno Behrens, Sven Hübner, Anas Bouguecha, 2015 .

Optimised press-hardening process using spray cooling – process integrated heat treatment of 22MnB5 sheet metal

Bernd-Arno Behrens, Fr.-W. Bach, Sven Hübner, 2011 .

Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes

Bernd-Arno Behrens, Sven Hübner, Kai Brunotte, 2021 .

Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming

Robert Schulte, Eduard Reithmeier, Sandro Wartzack, 2021, Sensors.

Influence of Superimposing of Oscillation on Sheet-Bulk Metal Forming

Bernd-Arno Behrens, Sven Hübner, Milan Vucetic, 2013 .

Superimposed Oscillating and Non-Oscillating Ring Compression Tests for Sheet-Bulk Metal Forming Technology

Bernd-Arno Behrens, Sergej Koch, Sven Hübner, 2015 .

Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts

Richard Krimm, Sven Hübner, Milan Vucetic, 2013 .

Numerical and Experimental Investigations of Multistage Sheet-Bulk Metal Forming Process with Compound Press Tools

Bernd-Arno Behrens, Sergej Koch, Sven Hübner, 2015 .

Enhancing Deep Drawing Processes by Using a Thermomechanical Tool Design

Bernd-Arno Behrens, Sven Hübner, Kathrin Voges-Schwieger, 2009 .

Material characterization of local strain-induced α’-martensitic reinforcements

Bernd-Arno Behrens, Sven Hübner, Kathrin Voges-Schwieger, 2009 .

Acoustic emission—A promising and challenging technique for process monitoring in sheet metal forming

Bernd-Arno Behrens, Sven Hübner, K. Wölki, 2017 .