Wang Xiao-feng

发表

Variation Spring Optimization Design of Hydraulic Constant-power Speed Control Device

Wang Xiao-feng, 2009 .

A Study on Gradation Design of Fine Particle SMA

Wang Xiao-feng, 2011 .

The Model of Asphalt Pavement Performance Prediction Based on the Parameter Self-Adaptation Method

Wang Xiao-feng, 2008 .

Numerical analyses of flow field and heat transfer in cavity of straight labyrinth seal at static state

Wang Xiao-feng, Wang Xiao-feng, 2008 .

Design of Feedback Temperature Control for Dam of Geliqiao Hydropower Station

Wang Xiao-feng, 2010 .

Detection Methods on Line of Total Water-hardness in Industry

Wang Xiao-feng, 2013 .

The Status and Developing Tendency of the Aspheric Optic Part Machining

Wang Xiao-feng, 2007 .

Analysis of Plastic Hanger Injection Molding Based on CAE

Wang Xiao-feng, 2009 .

Research on the law of gas distribution in JinDi Coal Field and prediction of gas emission in working face

Wang Xiao-feng, 2012 .

Experiments of Pyrotechnical Batteries

Wang Xiao-feng, 2008 .

Analysis on Obstacle Surmounting Ability of Truck-mounted Artillery

Wang Xiao-feng, 2011 .

Design of Formed Milling Cutter for Screw of Oil Extraction Progressing Cavity Pump Based on Non-instantaneous Envelope Method

Wang Xiao-feng, 2013 .

ANALYSIS ON TENSILE STRESS OF THE BRIDGE DECK PAVEMENTS WITH CRACKS

Wang Xiao-feng, 2007 .

Avalanche Photodiode Detecting Technology for Laser Fuze

Wang Xiao-feng, 2010 .

Process Analysis of Thin Wall Plastics Box Injection Molding Technology Based on CAE

Wang Xiao-feng, 2008 .

The design of direct pressing single seat control valve

Wang Xiao-feng, 2010 .

THE FAILURE ANALYSIS OF THREE ROLLER BIT SLIDING BEARING

Wang Xiao-feng, 2008 .

The Application of Industrial Control Computer to the Electrode Automatic Regulator for Steelmaking Electric Arc Furnace

Wang Xiao-feng, 2002 .

Equipment Modification of a 600MW Coal-fired Boiler Mixing-dilution Burning With Lignite at a Large Proportion

Wang Xiao-feng, 2013 .

Analysis of Causes to Burning of DC Contactor and Technology of Inspection and Repair

Csr Sifang, Wang Xiao-feng, 2011 .

Electric Bicycle Controller Design Based on PIC16F72

Wang Xiao-feng, 2007 .

Comparative Study on the Design Provisions for Control of Load-induced Cracks in Reinforced Concrete Members

Wang Xiao-feng, 2010 .

Use practice of SKN series of air splicer

Wang Xiao-feng, 2006 .

Simulation of the Performance of a Direct-Injection Stratified-Charge Rotary Combustion Engine

Wang Xiao-feng, 2003 .

Shear test on concrete bridge decks with waterproofing layer

Wang Xiao-feng, 2006 .

The Cause and Countermeasure of Uncompleted Burning of Fuel to Back Ring Forming on Precalciner Kiln

Wang Xiao-feng, 2002 .

Virtual Prototype Modeling and Simulation of Gun Automat

Wang Xiao-feng, 2008 .

Flight test of mass flow measurement of turbofan engine

Wang Xiao-feng, 2012 .

Dynamics Analysis for Gun With Consideration of Contact Between Arc and Gear

Wang Xiao-feng, 2008 .

The study of vibration in the second stage drying of milk powder

Wang Xiao-feng, 2002 .

Engineering Application of Accelerated Test to the Air Defense Missile

Wang Xiao-feng, 2011 .

ZFN13-40.5(Z) Gas Insulated Metal-Enclosed Switchgear

Wang Xiao-feng, 2005 .

Research on Returnable Packaging Management Based on RFID

Wang Xiao-feng, 2011 .

Dynamics Numerical Simulation for a Certain Gun in Consideration of Contact/Impact Among Parts in Traverse Bearing

Wang Xiao-feng, 2010 .

Research on the influence of neritic sound propagation environment to acoustics test

Wang Xiao-feng, 2009 .

An investigation of secondary flow control in a diffusing S-duct inlet

Wang Xiao-feng, 2009 .

Failure Analysis on Surface of the Regenerated Sleeve for the Continuous Caster's Back-up Roller

Wang Xiao-feng, 2007 .

Electromechanical Stress and Strain Analysis of Piezoelectric Intelligent Beam by Intelligent Spline Finite Point Method

Wang Xiao-feng, 2007 .

Investigation on Engine Surge Test in the Air with Disturbed Board in Flight Bed

Wang Xiao-feng, 2010 .

Laser Range-finding Technology Based on FPGA

Wang Xiao-feng, 2008 .

Optimum Placement of PZT Patches of Active Noise Control Within an Irregular Cavity

Wang Xiao-feng, 2002 .